SECTION 08 16 00.00 Flush
COMPOSITE DOORS
JELD-WEN® Flush Interior Doors
PART 1 - GENERAL
1.1
SECTION INCLUDES
A.
1.2
Passage Doors
REFERENCES
A.
National Fire Protection Association (NFPA)
1.
B.
Underwriters Laboratories, Inc. (UL)
1.
2.
C.
1.3
UL10B: Standard for Fire Tests of Door Assemblies (Note: Neutral pressure
standard)
UL 10C: Standard for Positive Pressure Fire Tests of Door Assemblies.
Underwriters’ Laboratories of Canada (ULC)
1.
D.
NFPA 252: Standard Methods of Fire Tests of Door Assemblies.
CAN4-S104: Standard Method for Fire Tests of Door Assemblies.
Uniform Building Code Standard 7-2 (UBC).
1.
UBC 7-2 (1994): Fire Tests of Door Assemblies.
testing standard).
(Note: Neutral pressure
2.
UBC 7-2 (1997): Fire Test of Door Assemblies.
testing standard).
(Note: Positive pressure
DESIGN REQUIREMENTS
A.
Fire-Rated Door Assemblies: Fire door assemblies shall meet or exceed fireprotection ratings indicated when tested in accordance with [NFPA 252] [UL
10[B][C]] [CAN-4S104] [and] [UBC 7-2].
Project Name/Project Number/16-Feb-16
08 16 00- 1
COMPOSITE DOORS
JELD-WEN® Flush Interior Doors
1.4
SUBMITTALS
A.
Refer to Section [01 33 00 Submittal Procedures] [Insert section number and
title].
B.
Product Data: Submit door manufacturer current product literature, including
installation instruction.
C.
Samples: Provide finish samples for all products.
D.
Quality Assurance Submittals
1.
E.
Provide manufacturer’s written installation
Closeout Submittals
1.
1.5
Manufacturer Instructions:
instructions.
Refer to Section [01 78 00 Closeout Submittals] [Insert section number and
title].
DELIVERY, STORAGE AND HANDLING
A.
Refer to Section [01 60 00 Product Requirements] [Insert section number and
title].
B.
Deliver doors, materials and components in manufacturer’s
unopened, undamaged containers with identification labels intact.
C.
Store doors as recommended by manufacturer.
1.6
original,
WARRANTY
A.
Refer to Section [01 78 36 Warranties] [Insert section number and title].
B.
Manufacturer standard warranty indicating that the door will be free from
material and workmanship defects from the date of substantial completion
for the time periods indicated below:
1.
Door Unit: 5 years
PART 2 - PRODUCTS
2.1
MANUFACTURER
A.
JELD-WEN® Interior Doors; 3305 Lakeport Blvd; Klamath Falls, OR 97601, USA;
Phone 877.535.3462, fax 541.882.3455; website www.jeld-wen.com.
Project Name/Project Number/16-Feb-16
08 16 00- 2
COMPOSITE DOORS
JELD-WEN® Flush Interior Doors
B.
2.2
Basis of Design: Doors are based on JELD-WEN®’s Flush Interior Doors.
PASSAGE DOORS
A.
Core and Frame
1.
Solid core with [combination wood/MDF] [all-wood] frame.
a.
2.
Solid mineral core with mineral composite frame.
a.
3.
Jamb Width: [4-9/16 inch] [5-1/4 inch] [7-1/4 inch]
Jamb Type: [Flat] [Split]
Jamb Species: [Finger-Jointed] [Stainable] Pine
Hardware
1.
C.
Thickness: 1-3/8 inch
Jambs
a.
b.
c.
B.
Thickness: 1-3/4 inch with [45-minute] [60-minute] [90-minute] fire
rating.
Hollow core with MDF frame.
a.
4.
Thickness: [1-3/8 inch] [[1-3/4 inch with [20-minute] [45-minute] fire
rating]].
Finish: [Zinc Dichromate] [Bright Brass] [Antique Brass] [Antique Nickel] [OilRubbed Bronze] [Bright Chrome] [Brushed Chrome]
Finish:
1.
2.
3.
Unfinished Hardwood: [Ash] [Rotary-Cut Birch (2-ply and 4-ply)] [Lauan]
[Rotary-Cut Red Oak] [Sliced Red Oak (2-ply and 4-ply)] [Primed thin MDF]
Prefinished Smooth: [Acorn] [Beachwood] [James Birch] [Cherokee]
[Chestnut] [Foothills Oak] [Mission Oak] [Olympic Oak] [Plymouth Oak]
[Oak Strand] [Regal] [Santa Fe] [Prime White]
Prefinished Embossed: [Embossed Oak] [Golden Oak] [Imperial Oak]
[Mendocino Oak] [Royal Oak] [Embossed Snow] [Embossed Snow-24]
[Embossed Walnut] [Regency Walnut]
Project Name/Project Number/16-Feb-16
08 16 00- 3
COMPOSITE DOORS
JELD-WEN® Flush Interior Doors
PART 3 - EXECUTION
3.1
GENERAL
A.
3.2
Install doors in accordance with manufacturer’s installation guidelines and
recommendations.
EXAMINATION
A.
Inspect door prior to installation.
B.
Inspect rough opening for compliance with door manufacturer
recommendations. Verify rough opening conditions are within recommended
tolerances.
3.3
PREPARATION
A.
Prepare door for
recommendations.
B.
Trim bottom of jamb sides to achieve desired distance between door bottom
and finished floor height.
3.4
installation
in
accordance
with
manufacturer’s
INSTALLATION
A.
Place door unit into opening and level hinge side of jamb. Use shims fastened
through jamb and stop to level and temporarily secure in place.
B.
Level latch side of jamb. Use shims fastened through jamb and stop to level
and temporarily secure in place.
C.
Verify spacing between jamb and door is uniform on all sides. Adjust as
necessary.
D.
Shim top of jamb in center of opening and fasten with nail.
E.
Re-check for square, level and even spacing around door. Nail securely in
place through stop, jamb, shims and into studs every 12 inches.
F.
Set nails.
G.
Install trim on both sides using nails every 12 to 16 inches.
Project Name/Project Number/16-Feb-16
08 16 00- 4
COMPOSITE DOORS
JELD-WEN® Flush Interior Doors
3.5
SCHEDULES
A.
Door Type A
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Style:
Core:
Frame:
Thickness:
Fire Rating:
Jamb Width:
Jamb Type:
Jamb Species:
Hardware Finish:
Door Finish:
Passage
Solid mineral
Mineral Composite
1-3/4 inch
60-minute
4-9/16 inch
Split
Stainable Pine
Brushed Chrome
Prefinished Embossed, Golden Oak
END OF SECTION
Project Name/Project Number/16-Feb-16
08 16 00- 5
COMPOSITE DOORS
JELD-WEN® Flush Interior Doors