Comprehensive Education Solutions llc.
COURSE DESCRIPTIONS
2014 NEC CHANGES AN NJ LAW
10 hrs
THIS COURSE IS REQUIRED FOR ALL NJ CONTRACTORS & JOURNEYMAN
This course covers most changes in the NEC based on Analysis of Changes, for 9 hours.
And 1 hour NJ law ( not available before Feb. 2014)
TRANSFORMERS:
4 hrs
Course covers trans former theory operation and connections, along with applicable requirements of the
NEC. KVA ratings, grounding, overcurrent protection and system voltages will be discussed, along with
graphic presentations detailing article 450 of the NEC.
MOTOR INSTALLATION REQUIREMENTS:
4 hrs
Course emphasizes the proper application of NEC article 430 regarding the installation of motors and
motor operated equipment. The proper sizing and selection of branch circuit conductors, overcurrent
protection, overload protection, disconnecting means and motor controller are covered
SERVICES:
4 hrs
Course covers requirements of article 230 NEC as well as some local utility requirements. Issues such as
Number of services, disconnects, clearance requirements, overcurrent protection and grounding and
bonding requirements
CONDUCTOR INSTALLATIONS:
4 hrs.
Course content includes selection of conductors , derating , conductor installation enviroment
conductor material ,stranding , and temperature limitation requirements
.
MOTOR BASICS:
2 hrs
Course focus on motor theory, history and development of the motor operation principles, types of motors
connection diagrams and basic motor troubleshooting
REQUIREMENTS FOR ELECTRICAL INSTALLATIONS: (ART.110) 2hrs
A complete review of article 110 including such issues as: conductors, wiring methods, temperature
limitations, work space requirements. And their impact with regard to other articles of the code.
RACEWAY AND BOX FILL CALCULATIONS
2hrs
Course covers all considerations associated with determining the proper size box and raceway. Raceways
with like and different type and size wire will be sized using the appropriate tables. Box fill for branch
circuit as well as pull boxes for feeders will be addressed.
WIRING METHODS (ART.300)
2hrs
This course covers items such as physical protection of conductors, underground installations ,burial
Depths and backfill requirements . Wiring in ducts and environmental spaces . Additionally rules for
the most commonly used wiring methods covered in chapter 3 will be summarized
A.F.C.I. PROTECTION
2 hrs
This course the evolution of A.F.C.I. PROTECTION from it’s inception to present code
requirements. Types of arc faults, connections, testing troubleshooting &U.L .test criteria will be
discussed.
______________________________________________________________________________________
NJ UCC Electrical Requirements
Course covers Only the Electrical Subcode & Electrical requirements of
theRehabilitation Subcode , Permit requirements, ordinary maintainence & minor
work rules will be reviewed.
______________________________________________________________________________________
ONE &TWO FAMILY DWELLINGS:
8 hrs Course covers all electrical
requirements for on and two dwellings. Residential wiring represents alarge percentage of electrical
installations, safe wiring in residential occupancies is most important to protect all of us and our families.
GROUNDING AND BONDING ONE
8hrs
Course stress the importance of grounding and boding in electrical installations. The selection and size of
grounding electrode conductors, equipment grounding conductors, e and bonding jumpers are covered in
Detail. The difference between bonding and grounding is emphasized in order to assure compliance to NEC
rules regarding design and installation of electrical systems.
ELECTRICAL ESTIMATING
8 hrs
This study introduces the participant to important factors to be considered when pricing Residential,
Commercial, Industrial, and Public Work . Topics for discussion include Blueprints, Material takeoff
, Overhead , Profit , and direct job expenses .
______________________________________________________________________________________
SERVICES:
4 hrs
Course covers requirements of article 230 NEC as well as some local utility requirements. Issues such as
Number of services, disconnects, clearance requirements, overcurrent protection and grounding and
bonding requirements.
RESIDENTIAL ELECTRICAL ESTIMATING:
4 hrs
Course focuses on cost of electrical installations in new and existing homes and apartments. By
learning to adapt the traditional quantity survey methods to build unit prices, Participants will be
able to develop their own unit prices based on the degree of difficulty of the task, and the cost of
operating their individual business
Health Care Facilities 4 Hrs
Presentation covers the requirements for electrical installations in Health Care Facilities. It is
primarily based on the provisions set forth in article 517 of the 2011National Electrical Code . This
presentation has been developed to promote greater understanding and to increase electrical safety
Health Care Facilities.
RECENT CHANGES TO THE NEC 8 Hrs
Course covers selected changes from the past 3 code cycles. 3,000 code changes are a lot to comprehend
in a 2 day period. How often do you find yourself asking when did that change and how did I miss that
this. Course will cover the changes most referred to changes you may have missed .
______________________________________________________________________________________
Residential Electrical Systems 1 4 Hrs
Course focus is on design and installation selected portions of the Electrical System. Topics Include:
General requirements selection of equipment. Calculations for Branch circuits and Feeders. Service
Calculations Grounding & Bonding , Cabinets & Meter enclosures . Overcurrent Protection Branch
circuits and Feeders. Proper selection and sizing of conductors.
______________________________________________________________________________________
Residential Electrical Systems 2
4 Hrs
Course focus is on design and installation of portions of residential electrical systems. Topics include
Requirements for: Power & Lighting circuits, Box fill calculations, Receptacles, Lighting, Appliances
Air conditioning equipment, and Feeders to Accessory Buildings Modifications to existing
residential systems are also addressed.
POOLS AND SPAS
4 Hrs
Course Covers The Installation Of Pools, Spas, HydroMassage Tubs. Among The Items Discussed
Are Branch Circuit Wiring Methods, Burial Depth Requirements, Grounding &Bonding, Of The
Pool And Surrounding Metal Parts. Disconnecting Means, GFCI Protection Of The Pool Equipment,
Lighting And Receptacles In The General Area Of The Pool, Spa And Other Equipment Covered By
NEC Article 680.
2011 Nec Changes Recap
5 Hrs
A condensed version of the Analysis of Changes of the 2011 NEC chapter 1 to 4 article 517 &680 are
covered. These are the areas of the code most contractors work on a daily basis. Newer licensees who
were not required to take courses in 2012 will find this of interest.