Specifications SNODI FOR BRACKETS To assemble heads with one or more light, select the Garden joints adequate to the diameters of the pole and the brackets.The Garden joints are realized in burnished cast brass, with oven dried acrylic varnishing, and are compound by a pair of ring clutched on the pole with relatives joints, assembled with A2 stainless steel bolts. On the pole is possible fix wall brackets directly on the ferrules. - Hose clamp ø76-tops are assembled using JAWS cast brass coupling of the appropriate cuff. Available ø 76/48 All screws are stainless steel to complement A2 The process of burnishing the brass surface, and is by immersion in anneritore after a degreasing chemical bath ultrasonic vibration and stimulation with tumbling with special abrasive materials. These give the artifact a special vintage. Finishing with a transparent coating film for the antioxidant protection of galvanically treated surfaces. Thermosetting powder coating with electrostatic application and curing in the oven 140 degrees, made with highly complex systems and equipment to ensure a perfect performance and a superior finish against the erosion of weathering. Coating with an average thickness 60 microns - Resistance to scratch grid standards ISO 2409 - • Resistance to impact resistance test according to UNI 8901 Versions Available: Codice/Code I409SN I410SN I411SN I412SN I413SN I414SN I422SN I423SN I424SN I4321SN I4322SN I4323SN I442SN I443SN I444SN I448SN I449SN I450SN I451SN I452SN I453SN Descrizione/Description JOINT ALLOY 90/48 1 LIGHT BENT HEADS JOINT ALLOY 90/48 2 LIGHTS BENT HEADS JOINT ALLOY 90/48 3 LIGHTS BENT HEADS JOINT BRASS 90/48 1 LIGHT BENT HEADS JOINT BRASS 90/48 2 LIGHTS BENT HEADS JOINT BRASS 90/48 3 LIGHTS BENT HEADS JOINT 108/48 1 LIGHT BENT ALLOY HEADS JOINT 108/48 2 LIGHTS BENT ALLOY HEADS JOINT 108/48 3 LIGHTS BENT ALLOY HEADS CAST.BRASS RING Ø90 1 BRACKET ADAPTERS CAST.BRASS RING Ø90 2 BRACKETS ADAPTERS CAST.BRASS RING Ø90 3 BRACKETS ADAPTERS JOINT 90/60 1 LIGHT BENT ALLOY HEADS JOINT 90/60 2 LIGHTS BENT ALLOY HEADS JOINT 90/60 3 LIGHTS BENT ALLOY HEADS JOINT 90/48 1 LIGHT TENSION ALLOY HEADS JOINT 90/48 2 LIGHTS TENSIONS HEADS JOINT 90/48 3 LIGHTS TENSIONS HEADS JOINT 90/60 1 LIGHT TENSION HEADS JOINT 90/60 2 LIGHTS TENSIONS HEADS JOINT 90/60 3 LIGHTS TENSIONS HEADS Altezza/Height Serie/Series COLLARI PALO Posa/.... Montaggio Interramento/.... 0 COLLARI PALO 0 COLLARI PALO 0 COLLARI PALO 0 COLLARI PALO 0 COLLARI PALO 0 COLLARI PALO 0 COLLARI PALO 0 COLLARI PALO 0 COLLARI PALO 0 COLLARI PALO 0 COLLARI PALO 0 COLLARI PALO 0 COLLARI PALO 0 COLLARI PALO 0 COLLARI PALO 0 COLLARI PALO 0 COLLARI PALO 0 COLLARI PALO 0 COLLARI PALO 0 COLLARI PALO 0 I454SN I455SN I456SN I470SN KIT 4 CLAMPS FOR TUBES 76/48 1,6 JOINT 108/48 1 LIGHT TENSIONS HEADS JOINT 108/48 2 LIGHTS TENSIONS HEADS JOINT 108/48 3 LIGHTS TENSIONS HEADS 4 CLAMPS KIT FOR TUBE 48/48 0,8 I511SN COLLARI PALO 0 COLLARI PALO 0 COLLARI PALO 0 1,7 I471SN I509SN JOINT ALLOY 76/48 1 LIGHT BENT HEADS 2 JOINT ALLOY 76/48 3 LIGHTS BENT HEADS 2 CLAMPS KIT FOR TUBE 60/48 1,2 1,9 I472SN I510SN JOINT ALLOY 76/48 2 LIGHTS BENT HEADS