1
WR440 Watershed Problem Analysis
Spring 2011 – Lab 1
Spatial Analysis and Watershed Modeling using ArcGIS 10
Geographic information systems allow you to analyze data that are in digital format for
hydrology and topographic analysis. ArcGIS allows you to analyze such data using the
Spatial Analyst and 3D Analyst extensions. This lab will demonstrate some of the
capabilities of these extensions. The main source of digital data for such analysis is a
digital elevation model (DEM). Using a DEM, you can delineate a drainage system and
quantify characteristics of that system. Watersheds and stream networks are the primary
input to most surface hydrologic models.
Part 1: Download spatial data
1.1 - Find the coordinates of the USGS streamflow station for your watershed and
convert to decimal degrees.
1.2 - Use these coordinates to locate your watershed using Google maps or other sources,
and become familiar with the area of your watershed.
1.3 - Visit http://seamless.usgs.gov/ and download a NED 1’’ DEM for your area of
interest (including your entire watershed).
1.4 - Save and extract the spatial data to a location that you plan to work with all of your
GIS data (your working directory). Save all future data for this lab in your working
directory.
Part 2: Preparing coordinates for ArcGIS
2.1 - Convert you USGS streamflow station coordinates to UTM coordinates (UTM Zone
13N). There is a good spreadsheet that has been developed for coordinate conversions
located here: http://www.uwgb.edu/dutchs/usefuldata/utmconversions1.xls
2.2 - Create a simple spreadsheet in Microsoft Excel of the X (Easting) and Y (Northing)
UTM coordinates of your USGS streamflow station and save the spreadsheet in your
working directory.
2
Part 3: Displaying data in ArcGIS
3.1 - Open both ArcMap and ArcCatalog on your computer.
3.2 - In ArcCatalog, click the connect to folder button on the toolbar and connect to the
folder that is your working directory. It is helpful to have ArcCatalog open while using
ArcMap to manage your data.
 Note: I would suggest creating a folder on the hard drive of the
computer (C:) and using this as your working directory, as the tools
will work much faster. You will need to copy all of your data onto
your network folder after you are finished or your data will be lost!
3.3 - In ArcMap, the first step is to set your coordinate system to the NAD 1983 UTM
Zone 13 N projection:
 View/Data Frame Properties/Coordinate System
o Predefined/Projected Coordinate System/UTM/NAD1983/NAD
1983 UTM Zone 13N
3.4 - In ArcMap, add the DEM raster layer that you have downloaded by clicking the
“Add Data” button, and finding your data in your working directory. The data will be in
TIFF file format.
3.5 - You will now need to re-project your DEM into the UTM coordinate system:
 Open the Arc Toolbox
 Data Management Tools/Projections and Transformations/Raster/Project
Raster
 Select you DEM into the Input Raster field, rename your new re-projected
DEM and specify to save in your working directory, and set the output
coordinate system to NAD 1983 UTM Zone 13N.
3
3.6 - The next step is to add the point location of your USGS streamflow station into
ArcMap.
 Add the excel spreadsheet that you created into ArcMap using “Add
Data”.
 Right click on the “Sheet 1” layer added into the table of contents and
select Display X Y Data.
 Make sure the correct fields are in the X and Y and that the NAD 1983
UTM Zone 13N coordinate system is selected, then select “OK”.
4


A point should appear where your station location is.
To make this a permanent shapefile, right click on the point layer in the
table of contents….Data/Export Data/, select to use the same coordinate
system as this layer’s source data, and rename and save the new shapefile
into your working directory. Click ok and yes to add this layer to the map.
Part 4: Hydrology Toolbox
4.1 – Review the help section in ArcGIS 10 for more information on the hydrology
toolset (example below):
5
4.2 - You need to turn on the Spatial Analyst and 3D Analyst Extensions to complete the
following operations:
 Customize/Extensions:
4.3 - In order to make sure your DEM surface does not have errors (sinks), that will
create an endpoint of a flowpath, you will need to utilize the fill tool to create a new
DEM surface:
 In ArcToolbox select Spatial Analyst Tools/Hydrology/Fill
 Select your projected DEM for the input surface raster and rename/save
the output fill DEM to your working directory.
6
4.4 - The next step is to generate a flow direction raster from the filled DEM, using the
flow direction tool:
 Spatial Analyst Tools/Hydrology/FlowDirection
 Rename the output and save to your working directory.

The flow direction raster will create one of eight values for each grid cell
representing the following flow directions:
 1=E
 2 = SE
 4=S
 8 = SW
 16 = W
 32 = NW
 64 = N
 128 = NE
7
4.5 - Using your flow direction raster layer you can now create a flow accumulation
raster layer, which displays the number of grid cells that are draining to any point across
the landscape.
 Spatial Analyst Tools/Hydrology/Flow Accumulation
 Rename the output and save to your working directory.
8

Using your new flow accumulation raster layer you can calculate the area
that drains to any cell in the watershed by multiplying the flow
accumulation value of the cell (hint: use the identify button to see the
value) by the area of one cell (pixel).
4.6 - In order to create the stream network from the accumulation raster, we will use the
raster calculator:
 ArcToolbox/Spatial Analyst Tools/Map Algebra/Raster Calculator
 In the calculator type the following conditional statement, however
substitue the layer name of your flow accumulation layer: streamnet =
Con(“flow accumulation raster” > 100, 1, “”)
9
4.7 - The next step is to utilize the snap pour point tool in order to snap the point location
of your USGS station to the flow accumulation path.
 ArcToolbox/Spatial Analyst Tools/Hydrology/Snap Pour Point
 Insert your point location of your USGS station into the pour point data
field, flow accumulation raster into the accumulation raster field, and 100
into the snap distance length.
 Rename the output and save to your working directory.
4.8 - The next step is to create a raster layer of your watershed. You can do this by
utilizing the watershed tool in the hydrology toolbox:
 ArcToolbox/Spatial Analyst Tools/Hydrology/Watershed
 Input your flow direction raster, and snap pour raster into the appropriate
fields. Leave VALUE in the pour point field.
 Rename the output and save to your working directory.
10
4.9 - We will now want to convert our raster watershed layer to a vector polygon so we
can clip the watershed out of our DEM and other raster layers.
 ArcToolbox/Conversion Tools/From Raster/Raster to Polygon
 Input your watershed raster layer and rename the output and save to your working
directory.
11
4.10 - The newly created watershed polygon can be used to clip all of the raster layers
that you have created thus far by completing the following steps:
 ArcToolbox/Data Management Tools/Raster/Raster Processing/Clip
 Input the raster you would like to clip, and input the watershed polygon
(vector layer) in the output extent. Check the use input features for
clipping geometry box, and rename the output and save to your working
directory. This process may take a few minutes.

Using the step outlined above, you will need to clip the following raster
layers to the area of your watershed:
 Original Projected DEM
 Filled DEM
 Flow Direction Raster
 Flow Accumulation Raster
 Stream Network Raster
4.11 - At this point it may be helpful to remove all of the layers from ArcMap that you
will no longer need to use (all of the original raster layers above that are not clipped to
the watershed).
12
4.12 – The next step is to use streamlink tool to assign a unique value to sections of the
raster linear network – all cells in the same stream segment are assigned the same value.
 ArcToolbox/Spatial Analysis Tools/Hydrology/Stream Link
 Insert your clipped stream network and clipped flow direction raster into
the appropriate fields

4.13 – The stream order tool assigns a numeric order to stream segments, classifying the
streams based on the number of tributaries flowing into them.
 ArcToolbox/Spatial Analysis Tools/Hydrology/Stream Order
 Insert your clipped stream network and clipped flow direction raster into
the appropriate fields
13
4.14 – The next step is to create a polyline vector stream layer from your stream network
raster layer using the Stream to Feature layer.
 ArcToolbox/Spatial Analysis Tools/Hydrology/Stream to Feature
 Insert your clipped stream network and clipped flow direction raster into
the appropriate fields
14
4.15 – Determine the length on each stream.
 Add a column in the attribute table of your new stream network polyline
layer: Right click on the layer, open attribute table, table options, add field
(see example below):

Once you have added the field, right click on its heading in the attribute
table and select “Calculate Geometry”. Calculate the length in meters.
15

This is the last step of the exercise using our stream layers. One additional
tool that you can use is the flow length tool, which calculates the upstream
and downstream flow distance along the flow path for each cell.
4.14 – The next step is to create additional pour points (or outlets) throughout your
watershed that can be used to create subwatersheds. How many subwatersheds will you
want to use for running your hydrologic model? Keep in mind the spatial variability
across your watershed. In order to create additional pour points throughout the watershed
we will need to create a new point shapefile in ArcCatalog:
 Open ArcCatalog and connect to your working directory. Click
File/New/Shapefile.
 Name your new shapefile, select point, and assign the appropriate
coordinate system:
16





Add your new shapefile into ArcMap using the add data button.
You will now need to open the Editor toolbar to edit the new shapefile you
have created
Customize/Toolbars/Editor
In the Editor Toolbar, select Editor/Start Editing then select you pour
points shapfile. Click the Create Features button on the toolbar:
Now, you can create all of the pour points that you want use to create your
subwatershed network. When you are finished click stop editing and
make sure to save your edits.
4.15 – Repeat steps 4.7 and 4.8 with your new pour points shapefile to create your
subwatersheds:

Additionally, once you have created your subwatersheds raster layer,
repeat step 4.9 to create a vector polygon layer for your subwatersheds
(use raster to polygon tool).
4.16 – In order to calculate the areas of you entire watershed as well as your
subwatershed polygons, repeat step 4.15, except create a new field and calculate area for
each of your watershed polygons instead of length.
17
Part 5: Spatial Analysis:
The last few steps of the exercise are to pull together more spatial data for your watershed
that will be used in your hydrologic assessment.
5.1 – Using your projected and clipped (not filled) DEM, create a slope surface for your
watershed.
 ArcToolbox/Spatial Analyst Tools/Surface/Slope
5.2 – Create an aspect surface for you watershed.
 ArcToolbox/Spatial Analyst Tools/Surface/Aspect
5.3 – Create contours for your watershed.
 ArcToolbox/Spatial Analyst Tools/Surface/Contour
18
5.4 – Create a hillshade of your watershed.
 ArcToolbox/Spatial Analyst Tools/Surface/Hillshade
 Use Default settings.
 Keep in mind that the hillshade values will not be used in any analysis,
rather the surface is created soley for map making.