S-44
Microwave Fat-burning Equipment
User Manual
-1-
SUMMARIZE
Microwave fat-burning is a newly type medical equipment, it uses microwave energy to do
part-heated therapy and cure many kinds of diseases. Microwave has been widely
applicable, adopted by many hospitals at home and abroad, received good effects after
clinic therapy.
The equipment adopts the most common microwave, with its frequency 2450Mhz, which is
near with hear producing on skin, fatness and muscle. Microwave burning fat machine
gathers microwave and shoots on body tissues, it is obsorbed by parenchyma.The high
frequence electromagnetic field creating by microwave can penetrate the inner of body
tissue, and all the tissue from the surface to the deep will create microwave biologic effect
at one time, which can promote blood circulation , stimulate metabolism, reinforce
immunity and so on.
Aadvantages of microwave include high efficient heating effect on human body,high
penetrability, heat from inner and outer simultaneously. Heat energy in the inner of body
tissues can act on skin into 12.5cms, which will not be influenced by overclothes,so it can
penetrate into epidermis, and directly reach into the fattiness layer. The ratio of heat energy
produced by microwave in fatness is nearly 9 times than in muscle.
MAIN FUNCTION
Slimming function: Microwave fat-burning machine can produce super microwave energy,
it has deep penetrability,can reach muscle inner as deep as 12.5cm. Modern
high-temperature physiology research indicates, ‘microwave fat-burning machine acts on
deep fatness through creating biologic heating effect. This can soften, shrinken, decompose
and burn the deep fatness, especially high effect on the indolent hybrid fat, viscera
recessive fat. Microwave slimming has wonderful effect on them, but other machine cannot
be matchable. At the same time ,the microwave makes the temperature of body inner
tissues increasing ,activate the lymph node, enlarge lymphatic capillary, clean the
decomposed fatness and the waste from metabolism through accelerating the flow of lymph
fluid. Simultaneously, Microwave fat-burning machine can aslo physically care the spinal
column and sympathetic ganglion at side of vertebra. As everybody knows, the
accumulation, metabolism, decomposing of fatness are under the control of sympathetic
nerve and subsidiary sympathetic nerve,which harmonize and accelerate whole body
fatness decomposing.
Physiotherapy. The physical factor created by microwave fat-burning machine acts on the
deep tissues, purposive effects on the pathological changes tissues, enlarges blood vessels,
promotes blood circulation, reinforces cell engulfing function, inhibits the growth and
-2-
reproduction of bacteria, accelerates toxin drainage, reduces inflammation, softens node
and cyst, stimulates the growth of granulation tissues, so it
can achieve diminishing
inflammation, detumescence, acesodyne ，hemostasia. For citizen’s common diseases, such
as dysmenorrhea , pain of waist, shoulder and crura, arthritis, rheumatism, Microwave
fat-burning machine can effectively improve deep injured ligament, joint capsule,
intervertebral blood circulation, and accelerate their recovery, stimulate joint cavity
secretion,make spinal column and main joints agile.
APPLICABLE RANGE
It is mainly to use on curing cervical erosion, hypertrophic rhinitis, Condyloma
Acuminatum, prostate hyperplasia, cute mastitis and some surface diseases.
1. It is the latest micro-computer control, possesses two theated methods like microwave
slimming, physiotherapy two functions.
2. Subcutaneous fat, fat of muscle, hybrid fat
3. Viscera recessive fat (fatty liver), peritoneum netted fat, blocked fat innner of
abdominal cavity]
4. Slimming and shaping,breast lifting and tightening abdomen, rejuvenate muscle
elasticity.
5. Vertebra pain of the waist and neck, arthritis, rheumatism
6. Kidney,ovary care etc.
OPERATION
1. First, connect the power supply.
2. Open the general power at the side of the machine.
3. Press Burning button to prepare slimming or physiotherapy, the Burning light at upper
right will be lighted, and adjust the relevant parameters from 0-40W.
4. Select the relevant parameters and press Burning button again, to start treatment. the
Output light at upper right will be lighted, it menas the machine in working, power also
can be adjusted.
5. Choose the appropriate treated time according to the client’s status. The client does’t
need to take off clothes. Choose the relevant micro emitter, and directly irradiate above
skin 1-2 cms. Be sure not touch skin.
6. Emitters: This machine has two microwave emitters. Can chose them as you want.
Normally, the bigger one is for big area of the body, like the belly, back, the small one
is for small area of the body, like the arm, crus etc.
7. After treatment, press the Reset button to finish power output, then close the general
swith, pull out of the power plug.
-3-
PERIOD of TREATMENT
1. Weight loss:
First, massage by gesture of weight loss about 15-20 minutes. Apply a towel on skin,
then use microwave machine to irradiate 15-30 minutes. 12 times are suggested as a
period of treatment.
2. Physiotherapy:
First, on symptomatic muscle or points, to do appeasing and relaxing gesture about
15-20 minutes. Apply a towel on skin, then use microwave machine to irradiate 15-30
minutes. 12 times are suggested as a period of treatment.
TECHNICAL PARAMETER
1. Working frequency: 2450±30MHz
2. Microwave output power: （Physiotherapy 0-40W; Therapeutic treatment: 0-80W）
3. Overcurrent protective: 80W
4. Timer: 0～10 seconds (Therapeutic treatment)
0～59 minutes (Physiotherapy)
SAFETY
1. Type of safety: It belongs to be B type of equipment under I species.
2. Running :Short-time loading and continuous running.
On therapeutic treatment: Less than 80W, 10s.
On physiotherapy: Less than 40W, 59min.
NATURAL WORK CONDITION
1. Circumstance temperature: 10-40℃;
2. Relative humidity: 30%～75%;
3. Air pressure: 700～1060HPa
4. Voltage: 220V±22V, 50Hz±1Hz;
USAGE
1．The equipment adopts the power socket, 3-wire standard socket is best, and be sure it
can should be grounded well.
2．Connect the plug at the rear of socket of the equipment, connect the plug of Pedal into
the rear socket of Pedal, all the chosen wires should be connected with Microwave
output tightly to avoid reflecting, and it is benefit for good effect and if life-span, then
connect the emiters with wires also tightly and firmly.
CAUTION
-4-
1. When place the microwave emitter, please close the power first.
2. The client cannot wear metal decoration or any clothes with metal.
3. Be sure not use the microwave emitter to shoot into eyes and the spermary.
4. Who has serious high blood pressure, or heart disease, cannot use the machine. Cause
the strong heat not only cannot change blood circulation, but also make the part lack of
oxygen. So please start operating it from the lowest power, and adjust it as the client’s
status.
5. The safety distance with skin is 1 meter away the emitter.
6. During the course, the beautician should always ask the client feeling, if he or she is not
hypersensitive on temperature, can adjust the output power lower. Normal principle is
that, if the symptom is more urgent, please adjust output power lower, if not, please
adjust output power higher. If the treated part can feel warm, that is enough. If overheat
or uncomfortableness, please reduce the power or stop treating, to avoid unwanted
damage.
7. Be sure not operate the machine on who is sensitive to the heat.
TRANSPORTATION AND KEEPING
Circumstance temperature: -10℃～55℃；
Relative humidity: 30%～95%；
Air pressure: 500～1060hPa
If the equipment is kept over 6 month, please take it out from the package,and plug it in 4
hours, then put it into package again. Be sure not pile it up, not against the ground, four
walls and ceiling.
The equipment is set inner quakeproof device, suitable for airplane, railroad, highway and
steamboat transporting, but please avoid it in status like raining, snow, convertion, piled-up
and afoul
P.S.: Exchanging the fuse.
Cut the AC wire with 220V power, use small-size or Mid-size flat screwdriver, to unclench
the groove under the power socket and exchang it, on the other fuse, can use cross head
screwdriver to screw it off and exchange.
Spec. of the fuse: Ф5×20 5A
POST SERVICE AND MAINTENANCE
We will guarantee the quality of our equipment, normally there is no quality problem
1. If there is a deficiency, please email or call us on the reasons, it would be best if this
can be dealt with by email or telephone. Because some of the problems are caused by
-5-
using the machine in a wrong way.
2. We suggest the client to take photos of the area where the problem occurs, we will pass
them to our technician , our technician will give a satisfactory answer within 1-7
working days
3. If the problem comes from the spare part, we could consider in changing the spare part
for our client, which could be sent with his/her next order. If the next order is uncertain,
we could pay freight cost to send the spare parts.
4. If the problem comes from the main device, we could advice our client to post the
device back to our company for repair by ordinary post, or we could re-send a new one
to our client. If the cost of posting the problematic device back to Sun Technologies is
more than the value of a new device, Sun Technologies would take it into consideration,
according to the actual status, apply to re-send a completely new device back to our
client.
Remarks:
1. The term of maintaining guarantee is a year from the date of purchasing according to
the receipt. Others not included in maintaining guarantee or over the time, we also
supply to maintain and renew but need charges. Please contact with the dealer if need
change of purchase the parts and easily expendable products.
2. We won’t supply maintaining guarantee if troubles as below:
3. Disassembling the machine by self;
4. Fall it without caution;
5. Lack of reasonable keeping and protect;
6. Not operate according to the user manual.
7. If changes of the design and specification of the machine, we will not notice you in
addition.
-6-