MATERIAL SAFETY DATA SHEET
GOLDEN ENVIRO SUPER SOLIDIFIER
01/01/2014
SECTION 1 Product and Company Identification
Manufacturer's name:
Spill - Cents
Manufactured for: Golden Environmental Products Inc.
2207 Simcoe Rd. 93, Barrie, On L4M 4Y8 (705) 792-0418
Emergency phone number
(877) 642-7632
SECTION 2 Composition / Information on Ingredients
Hazardous Components
Specific Chemical Identity Common Names
Sodium polyacrylate cross linked 20
CAS NUMBER 09003-04-7
OSHA PEL:
None
OSHA ACGIH TLV
NE
NE
% optional
15 mg/m3 total dust
10mg/m3 repairable dust
10mg/m3 other N.A.
No detectable crystalline silica, using x-ray diffraction and microscopic analysis
CAS NO: 93763-70-3
Section 3 - Physical/Chemical Characteristics
Boiling Point
Vapor Pressure (mmhg.)
Vapor Density (Air=1)
Water Solubility
Appearance and odor
Solid
Bulk density (apparent - g/cc ) 0.5_0.7
LT10
Melting Point Greater than 390 F
Nil
Evaporation Rate (Butyl Acetate=1) less than 1
Insoluble
White granular powder
Section 4 - Fire and Explosion Hazard Data
Flash Point
Flammable Limits
LEL: None
Extinguishing Media
None Flammable
None Flammable
UEL: None
None Applicable /Unused
Page 1 of 3
Golden Environmental Products Inc., P.O . Box 20113, Barrie, ON L4M 6E9
P 705.792.0418 F 705.721.1599 T 877.642.7632
Section 5 Reactive Data
Stability
Conditions to avoid
Incompatibility (materials to avoid)
Hazardous Decomposition or by-products
Hazardous Polymerization May not occur – x
Stable
None
Hydrofluoric acid
None Known
Conditions to avoid none known
Section 6 Health Hazard Data
Routes of Entry
Signs and Symptoms of exposure
Inhalation X Ingestion X
None
Persons sensitive to inert dust may experience coughing when exposed to heavy concentration of
airborne material. If dust particles lodge in eyes, use standard eye wash solutions or water and allow
eyes to clear.
Section 7 Precautions for Safe Handling and Use
Steps to be taken in case material released or spilled - Collect material, avoid airborne dust / Avoid
contact with water/ becomes slippery
Waste Disposal Method - material must be disposed of in Compliance with MSDS of collected matter.
IF PRODUCT IS USED TO SOLIDIFY A FLAMMABLE LIQUID, PLEASE TAKE NOTE: PRODUCT WILL BECOME
FLAMMABLE FROM VAPORS and FUMES from OVER SATURATION.
AVOID IGNITION BY SPARKS OR FLAMES.
SECTION 8 - Special Notes
LEACH ABILITY: this product satisfies the parameters set in the U.S. Environmental Protection Agency
(EPA) TCLP (Toxicity characteristics leaching procedure - method ASTM D2974)
The LRT (liquid release test EPA method 9096) Paint Filter Test EPA Method 9095
These tests serve merely to illustrate that when used properly this product will not leach absorbed
liquids when disposed of.
Page 2 of 3
Golden Environmental Products Inc., P.O . Box 20113, Barrie, ON L4M 6E9
P 705.792.0418 F 705.721.1599 T 877.642.7632
SECTION 9 – Other Information
Disclaimer
The information provided on this MSDS is correct to the best of our knowledge, information and belief
at the date of its publication. The information given is designed only as a guide for safe handling, use,
processing, storage, transportation, disposal and release and is not to be considered as a warranty or
quality specification. The information relates only to the specific material designated and may not be
valid for such material used in combination with any other material or in any process, unless specified in
the text. Furthermore, as the conditions of use are beyond the control of Spill-Cents, it is the
responsibility of the customer to determine the conditions of safe use of these products.
Page 3 of 3
Golden Environmental Products Inc., P.O . Box 20113, Barrie, ON L4M 6E9
P 705.792.0418 F 705.721.1599 T 877.642.7632