Lot/Block:
Builder:
Owner:
Date Submitted:
DRC Submittal Package
The following information is required to be submitted to the DRC for final
approval.
1. Two copies of a complete set of house plans in ¼ scale intended for use
by contractors and showing approval of homeowner including:
Builder Initials
DRC Initials
Builder Initials
DRC Initials
Builder Initials
DRC Initials
1
a. Basement plan including but not limited to:
i. Walkout or view out walls, patios, retaining walls, window
wells showing heights, lengths and design consistent with
engineer’s site and drainage plan and the DRC design
requirements
ii. Location of sump pump outlet
iii. Location and height of all brick ledges and dropped siding,
stucco or blocking consistent with engineer’s site and
drainage plan
iv. Location and size of all windows and doors
v. Location and type of all exterior lighting
b. Floor plans of each floor of house including but not limited to:
i. Square footage information for each above-ground level.
Calculation shall include area inside the exterior face of all
exterior walls of finished space not including any garage or
related storage area.
ii. Location of exterior mechanical equipment
iii. Screening design for trash and other items as required
iv. Location and size of all windows and doors
v. Location and type of all exterior lighting
c. Elevations showing all faces of exterior including but not limited
to:
i. Roof pitch and material noted on all roof areas
ii. Labels indicating all surface materials and design usage
such as width of lap siding, type of stucco, stone, brick
cedar trim, masonite/hardyboard trim, etc.
iii. Location of all wing or retaining walls designed per DRC
requirements
Watercress DRC Submittal Package
iv. Elevations must be drawn showing dropped masonry,
siding, garage doors, etc. reflective of the engineer’s site
and drainage plan
v. Window and door sizes consistent with floor plans
vi. Design details as intended to be built
vii. Any decks and or stairs
viii. Locations and type of all exterior lighting
ix. Screening designed for trash and other items as required
2. One original copy of Site and Drainage Plan designed by designated
engineer (MKEC) bearing engineer’s stamp and dated initials, including
but not limited to:
a. Plan must be on 11x17 and at 1”=40’ scale. Faxed or reduced
plans will not be accepted
b. Plan must have builder’s and owner’s signature
Builder Initials
c. All deck, driveways, patios, any other hard surface areas, all
structures, including dimensions, drainage and slope of ground
and hard surfaces
DRC Initials
d. Front setback distances
e. Elevations for top of foundation, garage door pad, basement
floor, walk out or view out wall elevations and top of curb at
corners of lot and at driveway
f. Wing or retaining walls and grade elevations
g. Drainage contours and flow direction for entire finished lot
h. Finished contour grade elevations at all sides of house
i. Percentage of slope labeling of all areas less than 5%. Slope of
less than 3% is discouraged but allowed for shorter distances.
j. Location of any trees affected by location or house or
improvements
k. Field verified ground and flow elevations at all property lines, at
all trees or in all areas adjoining lot containing trees, showing
grades and positive drainage
l. All easements and setbacks of record
m. Any landscaping terracing known or anticipated (if constructed in
future, elevations and drainage must be approved by MKEC and
the DRC)
n. Any underground drainage for any purpose including but not
limited to groundwater, sump, gutters known or anticipated (if
constructed in the future, elevations and drainage must be
approved by MKEC and DRC)
3. Two copies of complete set of specifications for construction of house
and all improvements including but not limited to:
a. Interior materials
Builder Initials
b. Exterior materials
c. Owners approval
DRC Initials
2
Watercress DRC Submittal Package
4. All other information as may be necessary to comply with required
approvals and all other provisions of the declarations and listed
requirements of the DRC
5. Two copies of exterior color schedule including but not limited to:
a. Manufacturer
Builder Initials
b. Color name and location on structure
c. Actual material or color samples no less than eight square inches
for each paint color
DRC Initials
d. Sample of actual material for all non-painted surfaces in
sufficient size to display full range of colors
6. Two copies of landscaping and irrigation plans and specifications
including but not limited to:
a. Design layout of all plantings
b. Labeling of all plantings indicating size and species
Builder Initials
c. Labeling of all ground cover or bedding material
d. Location, size and species of all trees
e. Drainage elevations for all planting areas
DRC Initials
f. Location, size, type, and color of any brick, stone, wood or other
material
g. Design or photo of any “art” pieces
h. Design and drainage elevations of any ponds or water features
i. Irrigation plans showing zones and locations and spray directions
of all heads
3

If information is not approved the DRC will notify builder and issue letter
stating reason(s).

Following approval the DRC will return to builder one set of all
submitted information initialed by DRC along with letter of approval and
any note of additional requirements.

Builder and owner should note that any excavation or foundation
contractor found using site plan not bearing approval signatures of
engineer, builder, owner DRC and developer, will be required by
developer to cease. Developer bears no responsibility for contractors
completing work with non-compliant plans and may check contractor’s
plans from time to time.
Watercress DRC Submittal Package