Figure 1: Bathymetry from ETOPO2. Area A, Area B and Area C are the three survey areas. Description of survey area: The planned survey areas are in the waters north and northeast of the Faroe Islands. In Figure 1 three polygons depict the survey area. The western limit of Area A is the Faroe–Iceland border line and the eastern limit of Area C is the Faroe-Norway border line. The bounding coordinates are listed below. The depth intervals in the survey area are estimated from existing surveys to be in the order 1-3.5 km for Area A, 2-3.5 km for Area B and 2-3 km for Area C. Area A has a complex topography and large gradients from both the general topography as well as from local outcrops must be expected. Area B has an overall gentle topography, with only local significant topographic features. Area C has a very gentle topography, and it is not expected that there are any large topographic features. Figure 2: Bathymetry data of known sources. Area A, Area B and Area C are the three survey areas. Bounding coordinates for the survey areas (in decimal degrees, WGS84) Area A: 64.84674675 63.93378223 63.92828585 63.65024114 63.81281641 64.21382184 64.84674675 -7.62608366 -5.37156607 -5.35878978 -5.83311822 -7.08260965 -9.02093598 -7.62608366 Area B: 63.92828585 63.65024314 63.54136449 63.37790600 63.75616304 63.77118807 64.44724358 63.92828585 -5.35878978 -5.83312495 -3.89088871 -2.28286617 -1.83669093 -1.93994105 -4.46069009 -5.35878978 Area C: 63.88706714 63.75616304 63.37790600 63.45097023 63.88706714 -0.49073391 -1.83669093 -2.28286617 -1.10611806 -0.49073391