Sponge Lab Procedure: 1. Weigh the dry natural sponge sample to the nearest gram and record result below. 2. Weigh the dry synthetic sponge sample to the nearest gram and record result below. 3. Place the natural sponge into a beaker of water until fully saturated. Take out, let excess water drip off, and weigh to the nearest gram and record result below. 4. Repeat with synthetic sponge. 5. Find the percentage of absorbency for natural sponge by using the following formula: (Saturated Mass / Dry Mass) x 100 = % 6. Record percentage below. 7. Repeat to find percentage for synthetic sponge. Dry Weight (in grams) Natural Sponge Synthetic Sponge Saturated Weight (in grams) Percentage of Absorbency