MATERIAL SAFETY DATA SHEET Complies with OSHA's Hazard Communication Standard (29 CFR 1910.1200) REFERENCE: DESCRIPTION Animal Feed Supplement EMERGENCY INFORMATION TELEPHONE NUMBER: (Chem-Tel) 800-255-3924 PRODUCT NAME VACCINE STABILIZER (White) MANUFACTURER'S INFORMATION EZ PAK,LLC P.O.BOX 185 JEFFERSON, GA 30549 DISTRIBUTOR’S INFORMATION ClearView Enterprise 675 Laura Lane Tontitown, AR 72770 ITEM NO. General information: 479-361-4689 SIGNATURES (Optional) DATE PREPARED: 10-29-2014 PREPARED By: Stephen F. Driggers REVIEWED By: Stephen F. Driggers HMIS RATING Concentrate HEALTH 2 REACTIVITY 0 FLAMMABILITY 0 PERSONAL B HMIS RATING Diluted HEALTH 1 REACTIVITY 0 FLAMMABILITY 0 PERSONAL B HAZARD RATINGS: 0 = Minimal 1 = Slight 2 = Moderate 3 = Serious 4 = Extreme A = Safety Glasses B =Safety Glasses & Gloves G = Glasses & Gloves & Vapor Respirator SECTION 2 - COMPOSITION / INFORMATION ON INGREDIENTS Hazardous Components (Specific Chemical Identity) CAS # OSHA PEL ACGIH TLV NIOSH % (Optional) Sodium Thiosulfate 7772-98-7 Acute Health Hazard (Immediate) ‡ Germicidal Actives * SARA Title III Section 313 Reportable N/A = Not Applicable N/E = Not Established N/D = Not Determined N/L Not Listed SECTION 3 - HAZARDS IDENTIFICATION (Potential Health Effects) POSSIBLE ROUTES OF ENTRY INTO THE BODY: HEALTH HAZARDS: SIGNS AND SYMPTOMS OF EXPOSURE: If in eyes: Burning eyes and temporary conjunctivitis of the eyes if makes contact through dust or mist. If on skin: Dust or mist may cause skin irritation from repeated or prolonged contact. If dust is inhaled: Inhalation of product dust or mist may irritate the respiratory tract. Contact with acids releases sulfur dioxide and, or hydrogen sulfide gas which may be harmful or deadly if inhaled. If swallowed: Ingestion may cause irritation of the gastrointestinal tract and purging, if a large quantity is ingested. Relatively low in acute toxicity. MEDICAL CONDITIONS GENERALLY AGGRAVATED BY EXPOSURE: Emergency Overview: Odorless, clear to white crystals, or granules which may irritate the skin and respiratory tract. May cause irritation and/ or burns to the eyes. Reacts with acids to form toxic and irritating sulfur dioxide gas and/ or hydrogen sulfide gas. Not flammable. CARCINOGENICITY: NOT LISTED AS CARCINOGENIC ACCORDING TO IARC, NTP, OR OSHA. SECTION 4 - FIRST AID MEASURES If in eyes: Flush eyes immediately with water for at least 15 minutes. Get medical attention if irritation persists. If on skin: Wash skin with plenty of soap and water. Remove contaminated clothing and wash before reuse. Get medical attention if irritation persists. If on clothes: Flush with large amounts of water while removing contaminated clothing. Wash contaminated clothing before reuse. If spray mist or dust is inhaled: If symptoms are experienced, move victim to fresh air. If breathing is difficult, give oxygen, provided a qualified operator is available. If symptoms persist, get medical attention. If swallowed: If conscious, immediately give 2 to 4 glasses of water and induce vomiting by touching finger to back of throat. If irritation persists, get medical attention. SECTION 5 - FIRE FIGHTING MEASURES FLASH POINT: N/A (METHOD USED): Flammable Limits: LEL: UEL: EXTINGUISHING MEDIA: Material is not flammable. Use extinguishing media appropriate for material in surrounding fire. SPECIAL FIRE FIGHTING PROCEDURES: Wear NIOSH-approved self-contained breathing apparatus to protect against any release of toxic and/ or irritating fumes. Skin and eye protection should also be provided. Use water-spray to keep fire-exposed containers cool, and to knock down fumes. UNUSUAL FIRE AND EXPLOSION HAZARDS: None SECTION 6 - ACCIDENTAL RELEASE MEASURES & DISPOSAL SMALL SPILLS: Promptly shovel or sweep up material with minimum dusting and shovel into an empty container with a cover. Cautiously spray residue with plenty water. LARGE SPILLS: Promptly shovel or sweep up material with minimum dusting and shovel into an empty container with a cover. Cautiously spray residue with plenty water. SECTION 7 - HANDLING & STORAGE HANDLING: Avoid contact with skin, eyes and clothing. Do not breathe dust or mist. Use with adequate ventilation. Wash thoroughly after handling. If dissolving and mixing solutions: with anhydrous material, the reaction is exothermic and the solution will retain heat; with the hydrate (crystal) material, the reaction is endothermic and the solution will cool. STORAGE: Store in a cool, dry well-ventilated area away from acids and oxidizing agents. Keep container closed when not in use and protect from physical damage. SECTION 8 - EXPOSURE CONTROLS / PERSONAL PROTECTION ENGINEERING CONTROLS: Mechanical Ventilation (General): Not required. Local Exhaust: Provide local exhaust if dusty or misty conditions exist or if there is a release of sulfur dioxide and, or hydrogen sulfide gas. Keep incompatible materials out of hoods, ducts, etc. RESPIRATORY PROTECTION: Wear required, use a NIOSH-approved respirator for dust, mist sulfur dioxide and / or hydrogen sulfide gas, as conditions indicate. If sulfur dioxide and/ or hydrogen sulfide gas, as conditions indicate. If sulfur dioxide and/ or hydrogen gas should be released, us a NIOSH-approved self-contained breathing apparatus or supplied-air respirator. SKIN PROTECTION: For handling dry material, wear cotton gloves and full work clothing, including long sleeved shirt and trousers. When handling solutions, wear impervious gloves and an apron. If contact with the solution is repeated and/ or prolonged, wear full impervious clothing. EYE PROTECTION: Wear chemical safety goggles/ glasses. Do not wear contact lenses. Eyewash and safety shower is recommended. WORK/HYGIENE PRACTICES: Standard good manufacturing and industrial hygiene practices should be followed. SECTION 9 - PHYSICAL / CHEMICAL PROPERTIES Appearance: Clear to white Odor: Odorless granules or crystals Boiling Point: Vapor Pressure: N/A N/A Specific Gravity: Solubility In Water: Vapor Density: N/A Melting Point: N/A 33 @ 0º C (anhydrous) 52 @ 0º C (crystal) 48º C (crystal) Page 1 of 1 pH (Concentrate): pH (Diluted): @ 1:256 Evaporation Rate: -8.6 (7.5% solution, anhydrous) 4-6 N/A SECTION 10 - STABILITY & REACTIVITY STABILITY: Normally stable HAZARDOUS POLYMERIZATION: Will not occur. INCOMPATIBILITY (Materials or Conditions to Avoid): Strong oxidizers: causes vigorous exothermic reactions. Acids: releases sulfur dioxide and/ or hydrogen sulfide gas. HAZARDOUS DECOMPOSITION OR BY PRODUCTS: Sulfur dioxide gas, hydrogen sulfide gas and sodium sulfide residue. SECTION 11 - DISPOSAL CONSIDERATIONS WASTE DISPOSAL METHOD: Improper disposal of excess product, mixture, or rinsate is a violation of Federal Law. If these wastes can not be disposed of by use according to label instructions contact your State Environmental Protection Agency or the nearest EPA Regional Office for guidance. SECTION 12 - TRANSPORTATION INFORMATION PROPER SHIPPING NAME: NOT REGULATED NOTE: The information herein is presented in good faith and believed to be accurate as of the effective date shown above. However, no warranty, expressed or implied is given. It is the responsibility of the user to comply with all Federal, State and Local laws and regulations. Page 2 of 1