The following files have been updated by this Service Pack.
CITECT32.EXE
CTCMP32.EXE
CTDRAW32.EXE
CTEDIT32.EXE
\BIN
\BIN
\BIN
\BIN
CTUTIL32.DLL \BIN
FOR GENERAL INFORMATION ABOUT SERVICE PACKS SEE KNOWLEDGE BASE ARTICLE
Q2181 CITECT FOR WINDOWS SERVICE PACKS
This Service Pack fixes the following problems:
* NCR 7082
Alarm summary entries are duplicated in the summary device when Citect is shutdown and restarted if an
Alarm save file is used and/or redundant Alarm servers are used. This happens because all unlogged entries are logged at shutdown. A new parameter controls this behaviour.
[Alarm]SummaryShutdownMode
Specifies whether alarm summary entries (both complete and incomplete) that have not been logged are logged at shutdown. This parameter should only be changed from the default if you are NOT using redundant alarm servers and/or alarm save files.
Allowable Values:
0 - Do not flush summary entries to devices.
1 - Flush summary entries to devices.
Default Value: 0
* NCR 10490
When Multi-state objects have several conditions filled out, with empty conditions in-between, Graphics
Builder will only show conditions up to the first empty condition.
* NCR 10657
When a trend client is viewing an event trend page and its network connection is interrupted it may crash.
* NCR 10761
When Multi-state objects have empty states, Citect will not display a blank symbol. e.g. If a multi-state symbol has two conditions, and only two symbols for state 0 and A, state B and AB both display symbols.
* NCR 10830
When using the WinPrint() Cicode function and explicitly specifying a palette file, the printed image is incorrect.
* NCR 10851
Default Character Set. Setting [Language]CharSet = 1 or using SetLanguage("xxx",1) did not select default character set and setting it to a character set that is not loaded causes Citect to crash.
* NCR 10880
Calling the StrToDate() Cicode function with a blank string or a string with a zero month (invalid) then
Citect will hang if the computer is set to a time-zone that does not have daylight saving.

* NCR 10937
Standby alarm properties would fail if the Alarm I/O Device was declared after the primary.
* NCR 10959
Cicode functions that display a string containing a percent (%) sign may not display correctly, and may cause a crash. Cicode functions that use TraceMsg() and Prompt() exhibit this problem.
* NCR 11018
Crash occurs after hitting OK on Page Properties in the Graphics Builder under Windows 95.
* NCR 11019
Doing a network shutdown with the Shutdown() function and mode 6 will not work.
* NCR 11047
In Project Editor, the “Find User Function” dialog will return any function name with more than 32 characters if the search string is not found.
* NCR 11073
Objects inside a genie appear smaller at runtime when the genie is rotated in Graphics Builder.
* NCR 11099
CitectInfo(). CitectInfo("DISK",sDrive,sType) returns negative number if over 2 gigabytes. Added two more disk information parameters, 2 returns free disk space in kilobytes, 3 returns total disk space in kilobytes
* NCR 11141
On a trend page, if you press the “scroll to real time” button a small gap appears at the start of the trend.
If you press this button again, the gap disappears but another appears at the start again. Logged data is still correct and only the display is affected.
* NCR 11154
A limit of approximately 32000 alarms per type (e.g. Digital, Analog) exists in Citect. This limit has been increased internally so that a maximum of approximately 64000 alarms per type can be used.
* NCR 11163
At runtime, changing pages from an RTF report display page may cause Citect to crash..
* NCR 11165
Project Editor sometimes crashes while deleting projects if the project contains long filenames.
* NCR 11170
The TagRead() Cicode function may cause Citect to crash when an overflow occurs.
* NCR 11173
Redundant Reports Server may take a few minutes, or fail, to run reports when the primary loses its network connection. Added new parameters [REPORT]HeartBeat=1 (default) and
[REPORT]HeartBeatTime=30000 (default) range is 500 msec to 60000 msec.
* NCR 11178
On an event trend page, if you stretch an event trend by changing the event base to be less than default, the initial display is correct. However, if in real-time mode, the new events are displayed in the default event base and not the new event base.
* NCR 11200

Graphics Builder error while saving page with native string substitution. Project directory paths in excess of 32 characters prompt the error 'Database error while saving native strings' when saving graphics pages containing internationalisation strings.
* NCR 11209
Opening more than the allowed maximum (8) kernel windows may cause Citect to crash.
* NCR 11319
When using standby I/O Devices there may be extraneous traffic between networked clients and I/O
Servers.
* NCR 11320
Argyle Digital Alarms do not update their timestamp between changes of state.
* NCR 11330
F1-F11 keyboard keys with the modifiers CTRL+ALT or CTRL+ALT+SHIFT do not work.
* NCR 11335
MsgRPC() crashes. MsgRPC() may crash Citect when called on the server.
* NCR 11340
Citect Time Stamped Alarms do not always match what the PLC reported.
* NCR 11376
The DspInfoField() Cicode function does not function correctly when using the [CTEDIT]Copy parameter.
* NCR 11387
Missing pages may cause a crash. Missing CTG and/or CTF files may cause Citect to crash at runtime.
* NCR 11388
The DDEWrite Cicode function may cause Citect to crash when long strings are used in the arguments.
* NCR 11439
When using AlarmSumGet() while traversing the summary alarm list in reverse (AlarmSumLast() ->
AlarmSumPrev()) summary entries may not be subsequently updated.
* NCR 11453
Software Protection Failure. Fatal system errors requiring operator input not disabled when setting
[debug]syserrdsp=0.
* NCR 11455
Crash occurs when adding page keyboard commands in Page Properties in the Graphics Builder under
Windows 95.
* NCR 11458
TrnSetPen() function may require that the trend page be refreshed before data for the pen will be shown.
* NCR 11500
<String resource not found>. System error messages in syslog.dat print as <String resource not found> instead of correct message.
* NCR 11514
Blocking of consecutive non digital types fails.