Toshiba IK-WB81A 1080p HD Day/Night Bullet Network Camera
Toshiba America Information Systems
9740 Irvine Blvd.
Irvine, CA 92618
877-855-1349
www.toshibasecurity.com
August, 2013
Product Guide Specification
Specifier Notes: This product guide specification is written according to the Construction
Specifications Institute (CSI) 3‐Part Format, based on Master Format 2004 and The
Project Resource Manual—CSI Manual of Practice. The Manufacturer is responsible for
technical accuracy. By removing the references to specific Toshiba product names or
part numbers, the text may be used also in performance‐based specifications.
The section must be carefully reviewed and edited by the Architect or Engineer to meet
the requirements of the project and local building code. Words and sentences within
brackets [ ] are choices to include or exclude a particular item or statement. Coordinate
this section with other specification sections and the Drawings.
Section 28 23 29
Video Surveillance Remote Devices and Sensors
Part 1 – GENERAL
1.1
SUMMARY
A. Section Includes
1. Video Surveillance Remote Devices
B. Related Sections
1. Section 28 23 13 – Video Surveillance Control and Management Systems.
2. Section 28 23 16 – Video Surveillance Monitoring and Supervisory Interfaces.
3. Section 28 23 19 – Digital Video Recorders and Analog Recording Devices.
4. Section 28 23 29 – Video Surveillance Remote Devices and Sensors.
1.2
REFERENCES
A. Federal Communication Commission (FCC) (www.fcc.gov)
1. FCC CFR 47 part 15 Class A – Telecommunications – Radio Frequency
Devices – Digital Emission
2. FCC CFR 47 part 15 Class B – Telecommunications – Radio Frequency
Devices – Digital Emission
B. International Electrotechnical Commission (IEC)
1. IEC 60529 Degrees of Protection provided by enclosures (IP code)
C. Underwriters Laboratories, Inc. (UL) (www.ul.com)
Project Name/Project Number
28 23 29 – 17
Video Surveillance Remote
Devices and Sensors
Toshiba IK-WB81A 1080p HD Day/Night Bullet Network Camera
1. UL 2044 Commercial Closed-Circuit Television Equipment
D. Institute of Electrical and Electronics Engineers, Inc. (IEEE) (www.ieee.org)
1. IEEE 802.3af Power Over Ethernet
E. Industry Canada (ICES) (www.ic.gc.ca)
1. ICES-003 Digital Apparatus – Spectrum Management and
Telecommunications Policy Interference Causing Equipment Standard
F. Canadian Standards Association (CSA) (www.csa.ca)
1. CSA C22.2 NO. 60950-1 Information Technology Equipment – Safety – Part
1: General Requirements
1.3
SYSTEM DESCRIPTION
A. Video Surveillance Remote Devices
1. 1080p HD Day/Night Bullet Network Camera
B. Performance Requirements
1. Provide high definition images – day or night.
2. Possess advanced features.
3. The camera shall be of the manufacturer’s official product line, designed for
commercial/industrial continuous 24/7 use.
4. The camera shall be based upon standard components and proven
technology.
1.4
SUBMITTALS
A. Submit under provisions of Section [01 33 00].
B. Product Data:
1. Manufacturer’s data, user and installation manuals for all equipment and
software programs including computer equipment and other equipment
required for a complete video system.
C. Shop Drawings
1. System device locations on architectural floor plans.
2. Full Schematic of system including wiring information for all devices.
D. Closeout Submittals
1. User manuals.
2. Parts list.
3. System device locations on architectural floor plans.
4. Wiring and connection diagrams.
5. Maintenance requirements.
1.5
QUALITY ASSURANCE
A. Manufacturer:
1. Minimum of 10 years experience in the manufacture and design of Video
Surveillance Devices.
Project Name/Project Number
28 23 29 – 17
Video Surveillance Remote
Devices and Sensors
Toshiba IK-WB81A 1080p HD Day/Night Bullet Network Camera
B. Installer:
1. Minimum of 5 years experience installing Video Surveillance Devices.
2. All installation, configuration, setup, program and related work shall be
performed by electronic technicians thoroughly trained by the manufacturer in
the installation and service of the equipment provided.
C. System Requirements:
1. Listed by UL specifically for the required loads.
2. Listed by IC specifically for the required loads.
3. Listed by FCC specifically for the required loads.
4. Listed by CSA specifically for the required loads.
5. Listed by RoHS specifically for the electronic assembly.
1.6
DELIVERY, STORAGE AND HANDLING
A. Comply with requirements of Section [01 60 00]
B. Deliver materials in manufacturer’s original, unopened, undamaged containers;
and unharmed original identification labels.
C. Protect stored materials from environmental and temperature conditions following
the manufacturer’s instructions.
D. Handle and operate products and systems according to manufacturer’s
instructions.
1.7
PROJECT CONDITIONS
A. Maintain environmental conditions (temperature, humidity, and ventilation) within
limits recommended by manufacturer for optimum results. Do not install products
under environmental conditions outside manufacturer's absolute limits.
1.8
MAINTENANCE
A. Maker ordering of new equipment for expansions, replacements and spare parts
available.
B. Provide factory direct technical support to the installing firm.
1.9
WARRANTY
A. Provide manufacturer’s warranty covering two (2) years for replacement and
repair of defective equipment.
Part 2 – PRODUCTS
2.1
MANUFACTURER
A. Acceptable Manufacturer
Toshiba America Information Systems
Project Name/Project Number
28 23 29 – 17
Video Surveillance Remote
Devices and Sensors
Toshiba IK-WB81A 1080p HD Day/Night Bullet Network Camera
9740 Irvine Blvd.
Irvine, CA 92618
877-855-1349
www.toshibasecurity.com
B. Substitutions: Under the provisions of Division 1:
1. All proposed substitutions must be approved by the Consultant or
Architect/Engineer professional.
2. Proposed substitutions must provide a line-by-line compliance document.
2.2
1080p HD Day/Night Bullet Network Camera
A. General Characteristics:
1. Provide advanced image support of resolutions up to 2 Megapixels of
effective picture elements 1920 (H) x 1080 (V)
2. Tri codec for simultaneous H.264, MPEG4 and JPEG transmission.
3. Simultaneous quad streaming of live video transmission.
4. Provide H.264 compressed video at 30 frames per second.
5. Provide MPEG4 compressed video at 30 frames per second.
6. Provide JPEG compressed video at 30 frames per second.
7. Housing capable of being mounted indoor or outdoor (International
Waterproof and Dustproof Standard: IP66).
8. Use a high quality 1/2.7” CMOS progressive scan sensor.
9. Provide B/W pictures down to 0 lux with IR LEDs on.
10. Provide for audio input and output directly to and from the camera.
11. Be capable of accepting power from 12V DC, 24V AC or IEEE 802.3af
Power-over-Ethernet (PoE).
12. Be capable of storing images on-camera via SD/SDHC storage.
B. Camera shall be capable of the following adjustments and features:
1. The camera shall be of a bullet form factor with the following mechanical
features.
a. Split glass design
b. Cast aluminum housing
c. IP66 rated
d. Built-in SRLED IR illuminators with a range of up to 30 meters.
2. The camera shall have a vari-focal 3.7 – 9mm, F1.2 – 2.1 lens.
3. Removable IR cut filter mechanism.
4. Horizontal angle of view of 37 degrees – 96 degrees.
5. Vertical angle of view of 21 degrees – 53 degrees.
6. Remote zoom
7. Remote focus
8. 1 audio microphone input
9. 1 audio output.
10. 1 digital alarm input.
11. 1 digital alarm output.
C. Video adjustments and requirements
1. Imager: Progressive scan 1/2.7 Inch CMOS.
2. 1920 (H) x 1080 (V) effective picture elements.
3. Primary color system.
Project Name/Project Number
28 23 29 – 17
Video Surveillance Remote
Devices and Sensors
Toshiba IK-WB81A 1080p HD Day/Night Bullet Network Camera
4. Tri codec H.264, MPEG4 and JPEG compression.
5. Minimum illumination of 0 lux with IR LEDs on.
6. Electronic shutter of 1/5 – 1/10,000 seconds.
7. Auto white balance.
8. Automatic Gain Control.
9. Backlight compensation.
10. Flickerless imaging, 50Hz or 60Hz selectable.
11. Privacy masking capabilities.
12. Tamper detection capabilities.
13. Motion detection capabilities.
D. Web Server adjustments and requirements
1. Protocols supported include TCP/IP, HTTP, HTTPs, UPnP,
RTSP/RTP/RTCP, IGMP, SMTP, FTP, DHCP, NTP, DNS, DDNS, PPPoE,
CoS, QoS, SNMP and 802.1X
2. ONVIF 1.02 compatible
3. Internet protocols supported include IPv4 and IPv6.
4. Installation Wizard setup program.
5. Simultaneous quad video streaming.
6. Support for up to 10 simultaneous live view clients.
7. Bandwidth control services include QoS and CoS.
8. Image size in H.264 mode: 1920 x 1080, 1280 x 1024, 1280 x 720, 640 x
480, 320 x 240.
9. Image size in MPEG4 mode: 1920 x 1080, 1280 x 1024, 1280 x 720, 640 x
480, 320 x 240.
10. Image size in JPEG mode: 1920 x 1080, 1280 x 1024, 1280 x 720, 640 x
480, 320 x 240.
11. Maximum frame rate in motion H.264 mode: 30 fps at all resolutions
12. Maximum frame rate in motion MPEG4 mode: 30 fps at all resolutions
13. Maximum frame rate in motion JPEG mode: 30 fps at all resolutions
14. Maximum FTPc frame rate: 30 fps.
15. Basic user authentication.
16. Multi-level ID and password login.
17. IP address filtering.
18. HTTPS.
19. 802.1x port based authentication.
20. Support for DDNS services includes no-ip.com and changeIP.com.
21. Multi-cast and Uni-cast services.
22. Alarm based recording to:
a. Email
b. FTP
c. SD card
23. Client PC based recording
24. SD and SDHC card based recording.
25. Electronic Pan/Tilt/Zoom.
26. Configuration settings import and export function.
27. Browser based firmware updating.
28. Automatic daylight savings time updating.
29. Embedded operating system Linux
E. Interfaces
Project Name/Project Number
28 23 29 – 17
Video Surveillance Remote
Devices and Sensors
Toshiba IK-WB81A 1080p HD Day/Night Bullet Network Camera
1. 10 Base-T/100 Base-TX.
2. RJ45 connector.
F. Operating Environment
1. Internet Explorer 8.0 or later.
2. Windows XP, Vista and Win7 operating systems.
G. Safety and Radio compliances
1. FCC/A for camera.
2. IC (ICES-003) for camera.
3. UL60950-1 for AC adapter.
4. CSA C22.2 No. 60950-1 for AC adapter.
5. FCC/B for AC adapter.
6. RoHS compliance per Toshiba guideline
H. Mechanical
1. Weight: 2.86 lbs (1.3 kg)
2. Dimensions: 7.83 inches x 3.19 inches (diameter) (199mm x 81mm)
I.
Electrical
1. Camera input voltage/power requirements: DC 12V+/-10%, AC 24V+/-10%,
IEEE 802.3af PoE.
2. Power consumption: 12V DC/0.8A, 24V AC/0.8A
J. Environmental
1. Operating Temperature: -22°F to 122°F (-30°C to 50°C)
2. Operating Humidity: 20 to 90% relative humidity.
3. IEC 60529 IP66 rated.
Part 3 – EXECUTION
3.1
EXAMINATION
A. Examine areas to receive devices and notify adverse conditions affecting
installation or subsequent operation.
B. Do not begin installation until unacceptable conditions are corrected.
3.2
PREPARATION
A. Protect devices from damage during construction.
3.3
INSTALLATION
A. Install devices in accordance with manufacturer’s instruction at locations
indicated on the floor drawings plans.
B. Perform installation with qualified service personnel.
C. Install devices in accordance with the National Electrical Code or applicable local
codes.
Project Name/Project Number
28 23 29 – 17
Video Surveillance Remote
Devices and Sensors
Toshiba IK-WB81A 1080p HD Day/Night Bullet Network Camera
D. Ensure selected location is secure and offers protection from accidental damage.
E. Location must provide reasonable temperature and humidity conditions, free from
sources of electrical and electromagnetic interference.
3.4
FIELD QUALITY CONTROL
A. Test snugness of mounting screws of all installed equipment.
B. Test proper operation of all video system devices.
C. Determine and report all problems to the manufacturer’s customer service
department.
3.5
ADJUSTING
A. Make proper adjustment to video system devices for correct operation in
accordance with manufacturer’s instructions.
B. Make any adjustment of camera settings to comply with specific customer’s
need.
3.6
DEMONSTRATION
A. Demonstrate at final inspection that video management system used with
devices functions properly.
END OF SECTION
Project Name/Project Number
28 23 29 – 17
Video Surveillance Remote
Devices and Sensors