PROGRAM: PLASTICITY 2015, Montego Bay, Jan. 4-9
Revised, January 2, 2015
If you have not received a receipt for your registration, and you definitely need one, then
please send an E-mail to symposium@internationalplasticity.com ASAP but before Jan. 4th
and pick it up from the registration room on Jan. 6th. Receipts will not be given after the
conf.
Kindly make sure that you make your dinner reservations in the three served restaurants
as soon as you arrive at the resort as they get full quickly and then you will be mostly
eating in their buffet restaurant. Dress code for the restaurants is smart casual (no half
pants and half sleeve shirts).
Reservations can be changed online, or by contacting Nescha.Watson-Henry@Hilton.com.
If you delete your reservation or delete your room on a particular date within one week of
your arrival date, the resort will assess a penalty of one night amount; the one night
amount penalty will be also assessed if you depart earlier than your reserved departure
date after check in.
Please arrange health, travel or any other insurance that you may need as the conference
does not carry any insurance on your behalf. Hilton is a gated high category property, but
you should observe normal safety precautions (not leave smart phone, ipad or laptop
unattended) and follow normal health precautions for travelling to a tropical resort, e.g. if
you are taking certain tours, then use insect spray with DEET. We strongly advise against
any visit to downtown Montego Bay area where cruise ships stop.
For airport transfers, you may check the following website, we have negotiated a very
special price of $22 per person roundtrip (rate is good for all conf. travel dates including
before and after conf. dates). The price is negotiated for your benefit but the agreement, if
you choose to use them, is between you and them. We are not responsible for any problems
or delays. http://jamaicatoursltd.com/transfer.php?type=airport_transfer&affiliateid=27
We recommend that you do not sign for any tours until after you reach Jamaica. The taxi is
around $35-40 one way.
We are requesting some colleagues to Chair sessions by putting their names on the
program. If you cannot accept our invitation, then please inform us and we will change it.
Chairs are requested to bring their laptops for session that you are chairing, as per our
experience, it is most efficient as you know how to handle your own laptop if there is a
problem. If you are unable to bring your own, there will be laptops available in the
registration room for your use.
Please print the program just before your departure to Jamaica, but after January 2, if you
need a hard copy for your use. The conference will provide only soft copies on memory
stick, or you can download it on your smart phone/ipad/laptop from our website. Hard
copies have become obsolete these days with widespread use of electronic devices, and also
the program will keep going through minor changes due to missed/delayed flights etc.
Participants who arrive on or before Jan. 3rd should register on Jan 3rd to avoid long lines
on 4th morning.
PROGRAM: PLASTICITY 2015, Montego Bay, Jan. 4-9
Saturday, January 3, 2015
Registration 4:30 PM-5:30 PM …..……………………………..…….……….(Room: Cornwall)
Sunday, January 4, 2015
Registration 7:30 AM-5:30 PM …..……………………………..…….……….(Room: Cornwall)
SuM -1 (8:30-10:30)
SuM -2 (8:30-10:45)
Challenges in Metal Forming
from Experiment to
Modelling I
(Room: Mt. Zion)
Higher order strain gradients
in modeling and experiment
(Room: Hanover)
** Rui Cardoso (++) & Thomas B.
Stoughton
**Alexander Hartmaier (++) &
Jeffrey W. Kysar(++)
** Marek Niewczas & Raja Mishra (++)
8:30-9:00
* Thomas B. Stoughton
“A general yield criterion
with explicit anisotropic hardening”
* Khanh Chau Le
“Martensitic phase transition involving
dislocations”
* V. Kaushik, R. Narasimhan,
Raja Mishra
“Experimental and numerical study of
mode-I fracture behavior in magnesium
single crystals”
9:00-9:30
* Wolfram Volk, Daniel Opritescu,
David Jocham
“Prediction of formability for nonlinear deformation history and press
hardening processes”
9:30-10:00
* Todd Leonhardt, Yan Jin, Lin
Yang, Tongguang Zhai and James
Ciulik
“A texturing study of molybd enum
processed by different thermomechanical processes”
* Jeffrey W. Kysar
“Comparison of geometrically
necessary dislocation density
distribution in indented FCC and BCC
crystals”
* Christoph Kirchlechner, C. motz,
P.J. Imrich,N. Malyar, J.S. Micha, O.
Ulrich, G. Dehm
“In situ micromechanics: An overview
on µLaue based experiments to study
GND accumulation in various loading
geometries”
10:00-10:15
+ Rui Cardoso, Jeong-Whan Yoon
and Jong-Bong Kim
“Constitutive modelling with strain
rate sensitivity and fracture criteria
for SPH ballistic simulations”
10:15-10:30
+ Mohsen Safaei, Wim De Waele
and Myoung-Gyu Lee
“Evaluation of four integration
algorithms for simulation of sheet
metal forming”
10:30-10:45
Coffee/Tea Break: 10:30-11:00
+Anxin Ma, Alexander Hartmaier
“The higher order nonlocal constitutive
model and its application to multiphase
materials”
+ Antonios Kontsos, Kavan Hazeli,
Jefferson Cuadra, Mike Cabal
“Monitoring and quantification of
twinning in magnesium alloys using
multiscale strain measurements”
+ Eduardo Bittencourt
“Higher-order crystal plasticity: a rate
dependent explicit solution”
SuM -3 (8:30-10:30)
Microstructure based modeling
of damage and fracture: theory
and experiment, in honor of
Prof. David Wilkinson I
(Room: Rose Hall)
* Srihari Kurukuri, Raja K. Mishra,
Michael J. Worswick
“Anisotropy and rate sensitivity of
ZEK100 magnesium alloy sheet”
* Marek Niewczas, M.Jobba, R.Mishra
“Stress equivalence in Al-based solid
solutions”
* Shigeo Saimoto
“Origin of ductile fracture in hardenable
aluminum alloys”
SuM-4 (11:00-13:30)
SuM-5 (11:00-13:45)
SuM-6 (11:00-13:45)
Diffusive and displacive
deformation and
transformation processes
versus plasticity in honor of
Prof. Franz Dieter Fischer I
(Room: Mt. Zion)
Multi-scale modeling of plastic
behavior of materials in honor
of Prof. Cristian Teodosiu I
(Room: Hanover)
Multiscale Modeling of
Dislocations and Defect
Interactions I
(Room: Rose Hall)
** Monique Gaspérini & Ioan R.
Ionescu
*Jean-Philippe Ponthot, Romain
Boman, Nicolas Legrand, Maxime
Laugier,Yves Carretta
“Multiscale modeling of the microplasto-hydrodynamic lubrication, A
crucial mechanism for friction in metal
forming”
** Dennis M. Kochmann (++) &
Thomas Hochrainer
** Valery I. Levitas (++) & James
Hammerberg
11:00-11:30
* Fritz Appel
“Mechanically driven disordering
and amorphisation in intermetallic
TiAl alloys”
11:30-12:00
*James Hammerberg, J. Milhans,
R. Ravelo , T. C. Germann
“Grain growth dynamics in
polycrystalline dynamic friction
simulations of ductile metal sliding”
12:00-12:30
12:30-12:45
12:45-13:00
* Ioan R. Ionescu, Jia. Li
“Multiscale anisotropic damage
modeling and dynamic wave
propagation”
*Gang Lu
“Multiscale modeling of hydrogen
embrittlement of metals”
* Valery I. Levitas and Mahdi
Javanbakht
“Interaction between phase
transformations and dislocations at
the nanoscale: Phase field approach”
*Grethe Winther
“Microstructural evolution at multiple
scales during plastic deformation”
* H.S. Leung, B. Cheng, P.S.S. Leung
and Alfonso Ngan
“Predicting size effect of strength and
dislocation pattern formation using
dislocation-density-function dynamics
simulations”
+ Kazuki Fujita, Keizo Nishikori,
Takeshi Iwamoto
“An assessment on strength of pipe
joint made of Fe-28Mn-6Si-5Cr shape
memory alloy by three-point bending
test in the wide range of deflection
rate”
+ Kais Ammar, Benoît Appolaire,
Samuel Forest, Maeva Cottura,
Yann Le Bouar ,Alphonse Finel
“Modelling inheritance of plastic
deformation during migration of
phase boundaries using a phase field
method”
* Shi-Hoon Choi, ChanUk Jeong,
Eun-Young Kim, Wan-Chuck Woo
“A study on micromechanical
deformation behavior and mechanically
induced martensite transformation of
metastable austenite phase”
13:00-13:15
+ Susan P. Gentry,
+Katsuyo Thornton
“Simulating recrystallization in
plastically deformed titaniumaluminum alloys”
13:15-13:30
+ Hang Thi Pham, Takeshi
Iwamoto
“Computational prediction of bending
deformation behavior of TRIP steel
under impact loading”
13:30-13:45
* Thomas Hochrainer, Alireza
Ebrahimi, Stefan Sandfeld, Michael
Zaiser
“On the current state of continuum
dislocation dynamics”
* Jeffrey S. Amelang, Gabriela N.
Venturini, Dennis M. Kochmann
“Understanding dislocation interactions
from coarse-grained molecular dynamics”
* Takayuki Hama, and Hirohiko
Takuda
“Deformation behavior during twostage loading in a magnesium alloy
sheet”
* Lars-Erik Lindgren, Liu Jun, Anders
E. W. Jarfors
“Plasticity model of AA 5083 accounting
for high temperatures and low strain
rates”
+ Yann Charles, Monique Gaspérini,
Tuan Hung Nguyen, Kevin Ardon,
Sabrine Ayadi，Nadim Alayli
“From sheet metal forming to
simulation of hydrogen-plasticity
interactions in polycrystalline
aggregates”
+ Yichao Zhu, Yang Xiang
“A continuum model for dislocation
dynamics in three dimensions and its
applications in studying the plasticity of
micro-pillars”
SuA -1 (14:30-17:00)
Role of Grain Boundaries in
Plasticity and Microstructure
Formation I
(Room: Mt. Zion)
14:30-15:00
** Irene J. Beyerlein &
Christopher D. Barrett (++)
* Martin Crimp, Y. Su, B. Dunlap,
C. Zhang, T. Bieler, P. Eisenlohr, C.
Boehlert, C. Zambaldi, and D.
Mercier
“Characterization of plasticity using
advanced electron microscopy,
atomic force microscopy, 3-D X-ray,
and nanoindentation”
SuA -2 (14:30-17:15)
SuA -3 (14:30-17:00)
Crystal and Polycrystal
Plasticity & Texture I
(Room: Rose Hall)
Cyclic Plasticity & Fatigue
I
(Room: Hanover )
** David Fullwood &
Victor Berdichevsky
** Zbigniew L. Kowalewski &
Huseyin Sehitoglu
* Victor Berdichevsky
“Hot spots in polycrystals”
* Huseyin Sehitoglu, Y.Wu, A. Ojha
“Fatigue crack growth fundamentals in
shape memory materials”
15:00-15:30
* Donald Stone, Seong-Min Lee
“Colony (grain) boundary sliding and
crack growth in Pb-Sn Eutectic”
15:30-16:00
* Irene J. Beyerlein, J. Wang
“Twinning from grain boundaries”
* D. Dong, Y. Li, A.J. Bushby, and D
David J. Dunstan
“Micro-torsion experiments”
+ K.D. Molodov, Talal Al-Samman,
D.A. Molodov, G. Gottstein
“Plasticity and dynamic
recrystallization of magnesium single
crystals”
+ Jann-Erik Brandenburg, Luis A.
Barrales-Mora, Dmitri A. Molodov
“Faceting and migration of low angle
boundaries in aluminum: impact of
grain boundary character”
* David Fullwood, Stephen Cluff,
Craig Daniels,Timothy Ruggles,
Tracy Nelson, Stuart Wright, Rongjie
Song
“EBSD tools for the study of
transformation products in steels”
16:00-16:15
16:15-16:30
16:30-16:45
+ Yuriy Perlovich, Margarita
Isaenkova
“General laws of substructure nonuniformity in deformed metal
materials”
+Jian Wang, Anil Kumar and
Carlos N Tome
“Atomistic study of twinning
associated boundaries in
HCP metals”
16:45-17:00
* X.Z. Xiao, D.K. Song , H. J. Chu,
Huiling Duan
“Mechanical properties of irradiated
FCC metallic polycrystals”
* K. Linga Murty, Apu Sarkar,
Boopathy Kombaiah, Peiman
Shahbeigi Roodposhti
“Crystallographic texture and
mechanical anisotropy of HCP metals”
* Zbigniew L. Kowalewski,
Lech Dietrich, Grzegorz Socha
“Anti-buckling system for flat specimens
investigation under cyclic tensioncompression”
* Ming Dao
“Fatigue and damage accumulation of
nanostructured materials”
* Andrej Žerovnik, Ivan Prebil
“Observation of the low-cycle fatigue
damage of materials exhibiting the yieldpoint phenomenon”
+ Jean-Briac le Graverend, Jonathan
Cormier, Franck Gallerneau, Serge
Kruch, José Mendez
“Effect of the γ’ precipitate distribution
on the high temperature cyclic behavior of
a Ni-based single crystal superalloy”
+ Sepideh Ghodrat, H.Pirgazi,
L.A.I. Kestens
“Substructural formation during tensile
elongation in 6xxx series aluminum
alloy observed in 3D-EBSD”
17:00-17:15
* 30
minutes key-note lecture, + 15 minutes invited presentation ** Chairs
++ Minisymposium Organizer
17:30-19:00 Cocktail Reception King Frog Bar (outside Lobby at Lobby Level)
Monday, Jan. 5, 2015
Registration 8:00 AM-5:30 PM …..………………….………..…….………….(Room: Cornwall)
MM-1 (8:30-10:30)
MM-2 (8:30-10:15)
MM-3 (8:30-10:30)
Plasticity and Microstructural Evolution in
Nanostructured Materials I
(Room: Rose Hall)
Localization and fracture
(Room: Hanover)
Metal Forming I
(Room: Mt. Zion )
** Christopher R. Weinberger (++)
& Michael J. Demkowicz
** Robert Chulist & Stelios
Kyriakides
** Rajiv Shivpuri & Michele Chiumenti
8:30-9:00
* Helena Van Swygenhoven, A.
Irastorza, S. Van Petegem, D.
Grolimund
“Insitu Laue diffraction to study
deformation in metals”
* Nicolas Tardif, MartinScales, Stelios
Kyriakides
“Localization and failure of an
aluminum alloy under combined shear
and tension”
* Michele Chiumenti, W. Huang, X.
Lin, L. Wei, M. Cervera, C. Agelet de
Saracibar and N. Dialami
“Numerical simulation of shaped metal
deposition processes close to the industrial
manufacturing technology”
9:00-9:30
* Matteo Seita, John P. Hanson,
Silvija Gradečak, Michael J.
Demkowicz
“Grain boundary character and Hassisted intergranular fracture in Nibase superalloys”
* Lev B. Zuev
“Autowave mechanisc of solids
plasticity”
*Joao F. C. Moraes* and Brian Jordon
“Elucidating the effect of residual stresses
in dissimilar magnesium-to-aluminum
joining via self-pierce riveting”
9:30-9:45
* Gang Feng
“Characterizing and tuning the
mechanical properties of nanoparticle
assemblies”
9:45-10:00
10:00-10:15
+ Gregory B. Thompson, L. Wan,
T. Kaub,X.X. Yu, and B. Fu
“Intrinsic growth stresses in the
phase stability and microstructural
evolution of thin films”
10:15-10:30
+ Asher C. Leff, Christopher M.
Barr, Gregory Vetterick,
Christopher Weinberger, and Mitra
L. Taheri
“Predictive microstructural evolution
via localized strain dependence
measurements using correlated
precession diffraction and in situ
TEM”
Coffee/Tea Break: 10:30-11:00
+ Stephane J.M. Marcadet and
Dirk Mohr
“Ductile fracture after non-proportional
loading: experiments and modeling”
+ Robert Chulist, M.J. Szczerba
“Multi-stage deformation twinning in
Ni-Mn-Ga ferromagnetic shape memory
alloys”
+ Borja Erice1, Christian C. Roth,
Dirk Mohr
“Strain rate effect on ductile fracture
initiation in AHSS sheets”
* Rajiv Shivpuri, Rohit Subramanian,
Kuldeep Agarwal
“Inclusion based design of metal forming
processes for failure critical parts "
+ Eva-Lis Odenberger, Lluís Pérez
Caro, Per Thilderkvist, Mats
Oldenburg
“Aluminum forming of welded blanks at
elevated temperatures for rocket nozzle
applications”
+ Andreas Lundbäck, Lars-Erik
Lindgren, Bijish Babu, Corinne Charles
“Dislocation density based plasticity
model coupled with a microstructure
model for use in additive manufacturing
simulation of TI-6AL-4V”
MM-4 (11:00-13:30)
Micromechanics-based
Approaches for Inelastic
Deformation of Solids I
(Room: Mt. Zion)
MM-5 (11:00-13:15)
MM-6 (11:00-13:15)
Crystal and Polycrystal
Plasticity & Texture II
(Room: Hanover)
Anisotropic Response, Damage
& Failure
(Room: Rose Hall)
** Vijay K. Vasudevan &
Gerhard Fuchs
** Alan A. Luo & Kenneth Runesson
** Huiming Yin & Etienne Martin
11:00-11:30
* Maciej Szczerba,S. Kopacz,
M.S. Szczerba
“Physics of detwinning in FCC
structures”
* Kerry S. Havner
“Rate-independent and viscoplastic
analyses of lattice rotation, crystal
shear, and constraint stress in channel
die compression of FCC crystals”
11:30-12:00
* M. Kaplan and Gerhard Fuchs
“Effect of oxide and non-metallic
defects on the mechanical properties
of cast Ni-base superalloys”
* Niels Hansen, Xiaoxu Huang,
Andrew Godfrey
“Stable and unstable flow in fine and
superfine grained aluminium and IF
steel”
* Etienne Martin, Reza SharghiMoshtaghin and Akane Suzuki
“Phenomenological description of critical
kinetic conditions to activate γ’ shearing
mechanisms in ni-base superalloys”
* Michael D. McMurtrey, Ian
Robertson, Diana Farkas, and
Gary S. Was
“Role of stress localization in initiation of
irradiation assisted stress corrosion
cracking”
12:00-12:30
* Amrinder Gill, Abhishek Telang,
Chang Ye, Zhong Zhou, Gokul
Ramakrishnan, Yixiang Zhao,
Sagar Bhamare, Hitoshi Soyama,
Y-S. Pyun, S. R. Mannava, Dong
Qian and Vijay K. Vasudevan
“Microstructure and property
changes in metallic alloys induced by
advanced mechanical surface
treatments”
* Kenneth Runesson, Magnus Ekh,
and Fredrik Larsson
“Constructing a macroscale yield
surface for a polycrystal with a priori
defined confidence using a virtual
testing strategy”
12:30-12:45
+ Salim El-Naaman, Kim L.
Nielsen, Christian F. Niordson
“Strain gradient crystal plasticity: a
continuum mechanics approach to
modeling micro-structural evolution”
12:45-13:00
13:00-13:15
+ Alexander H. King, Matthew F.
Besser, Valery Borovikov, Matthew
J. Kramer, Richard A. LeSar,
Mikhael Mendelev, Ryan T. Ott,
Krishna Rajan, Hakan Yavas, and
Anthony J. Rollett
“Basic principles in the plasticity of
nano-twinned fcc metals”
* Alan A. Luo
“Enhancing plasticity of wrought
magnesium alloys: modeling and
experiments”
+ Nicholas Gates and Ali Fatemi
“Prediction of stress-strain response
under non-proportional multiaxial
loadings”
* Richard P. Vinci, C. Austin Wade,
Mark McLean, Patrick Holmes, and
Masashi Watanabe
“Plasticity and fracture in bi-doped
copper bicrystals”
+ Thomas Tancogne-Dejean, Christian
C. Roth and Dirk Mohr
“Probabilistic fracture of TI-6AL-4V
made through additive layer
manufacturing”
+ Theo A. Tervoort and Markus Hütter
“Statistical-mechanics based modeling of
finite anisotropic viscoplastic
deformation”
+ F.L. Chen, X. He, P.A. Prieto-Munoz,
Huiming Yin
“Opening-mode fractures of a brittle
coating bonded to an elastoplastic
substrate”
MA-1 (14:30-16:45)
Viscoplasticity and Cyclic
Plasticity in Nanocrystalline
and Ultrafine Grained
Materials II
(Room: Mt. Zion)
**Olivier Pierron(++) &
Markus Hütter
14:30-15:00
* Taher Saif
“Small size and microstructural
heterogeneity of materials offer both
high strength and ductility”
15:00-15:15
15:15-15:30
* Mykhailo Semkiv, Didier Long,
Markus Hütter
“Two-scale model for the elastoviscoplastic behavior of silica-filled
elastomers”
15:30-15:45
+ Ehsan Hosseinian, Marc Legros,
and Olivier Pierron
“In situ tem investigation of
viscoplasticity and cyclic plasticity in
ultrathin nanocrystalline films”
15:45-16:00
+ Verena Maier, Reinhard Pippan,
Daniel Kiener
“Deformation behavior of bcc- and
FCC-metals – Influences of grain
boundaries and loading conditions”
16:00-16:15
16:15-16:30
16:30-16:45
+ Marwan Al-Haik, A. Alipour
Skandani and A.Y. Boroujeni
“Viscoplastic behavior of carbon
Fiber/Zno nanorods hybrid
composites”
+ Marlene Kapp , T. Kremmer, C.
Motz, M. Reisinger, B. Yang, R.
Pippan
“Cyclic deformation of ultrafinegrained copper micro-bending beams:
microstructural changes and damage
evolution”
+ Marwan Al-Haik, R. Ctvrtlik and
A. Alipour Skandani
“A novel in-situ nanomechanical
characterization of phase
transforming materials”
MA-2 (14:30-16:45)
MA-3 (14:30-16:30)
Challenges in Metal Forming
from Experiment to Modelling
II (Room: Hanover)
Deformation and Failure at
Micro and Nano Scales II
(Room: Rose Hall)
** Jeong Whan Yoon(++) &
Sandrine Thuillier
* Fuh-Kuo Chen, and
Heng-Kuang Tsai
“Forming properties of advanced high
strength steel sheets under tensioncompression deformation and biaxial
stretching”
+ Chris P. Dick and Yannis P.
Korkolis
“The ring hoop tension and ring planestrain tension tests for measuring the
anisotropy of extruded tubes”
+ Jinwoo Lee, Myoung-Gyu Lee,
Frédéric Barlat, Daeyong Kim,
Yeong-Seon Lee, and Geun-An Lee
“Constitutive modeling for anisotropic
hardening behavior of magnesium alloy
AZ31B”
+ Cong-Hanh Pham, Sandrine
Thuillier, and Pierre-Yves Manach
“Mechanical behavior of ultra-thin
stainless steel sheets – application to
deep-drawing”
+ Dong-Yoon Seok, Daeyong Kim,
Sang-Woo Kim, Young-Seon Lee and
Kwansoo Chung
“Hardening Properties and Fracture
Criterion for Mg Alloy Plates at
Elevated Temperature”
+ Oluwamayokun, Mayo Adetoro,
and Rui P.R. Cardoso
“The modelling of temperature
dependent flow softening in the
manufacturing of titanium alloys”
+ Juan Liao, Jose A. Sousa, Xin Xue,
Augusto B. Lopes, Frederic Barlat
Jose. J. Gracio
“Hardening behavior and modeling of
dual phase steels under strain path
changes”
** Gunther Richter & Jae-il Jang
* Jae-il Jang, In-Chul Choi, Yong-Jae
Kim, Moo-Young Seok
“Time-dependent nanoscale deformation
of advanced materials at room
temperature”
* Michal Krzyzanowski, Szymon Bajda,
and W. Mark Rainforth
“Interfacial oxidation in combined
nanocrystallisation processes involving
subsequent thermomechanical
processing”
* Eric Le Bourhis, Konstantinos
Pantzas, Gilles Patriarche, Anne
Talneau, Isabelle Sagnes, David
Troadec
“Plasticity and fracture of semiconducting
substructures”
* Gunther Richter
“Mechanic properties in one-dimensional
nanostructures”
16:45-17:25 Khan International Medal/Award Lecture
(**van Houtte;Room:Rose Hall)……………………………………….Georges Cailletaud
* 30
minutes key-note lecture, + 15 minutes invited presentation ** Chairs
++ Minisymposium Organizer
17:30-19:00 Cocktail Reception King Frog Bar (outside Lobby at Lobby Level)
Tuesday, January 6, 2015
Registration 8:00 AM-5:30 PM …..………………..…….………….(Room: Cornwall)
8:30-9:00
9:00-9:30
9:30-9:45
TuM-1 (8:30-10:30)
Plasticity at High Strain Rate
and Pressure I
(Room: Mt. Zion
TuM-2 (8:30-10:30)
Challenges in Metal Forming
from Exper-iment to Modelling
III (Room: Hanover)
** Lorenzo Peroni & Arunachalam
M. Rajendran(++)
** Pierre-Yves Manach & Hoon Huh
** Carmelo E. Majorana & Arash
Yavari
* Hoon Huh, S. J. Lim,Yanshan Lou,
Lee Ju Park, Hyung Won Kim
“New ductile fracture criterion in sheet
metal forming at a wide range of strain
rates”
* Arash Yavari
“Nonlinear elastic inclusions in isotropic
solids and the stress singularities
generated by anisotropic eigenstrains”
* Robert Wagoner and Zhong Chen
“Nature of the elastic-plastic
transition”
* Carmelo E. Majorana, and Beatrice
Pomaro
“Dynamic stability of an elastic plate with
visco-elasto-damaged translational and
rotational boundary supports”
* Arunachalam M. Rajendran and
M.M. Shahzamanian
“Modleing of damage in a
heterogeneous cementitiuos material
under dynamic loading conditions”
* Ron Winter, Matthew Cotton,
Ernie Harris, David Chapman,
Daniel Eakins,Jonathon Harris,
Graham McShane
“Plastic flow of impact-loaded
additively-manufactured cellular
structures”
+ Yanbin Wang, Julien Gasc,
Tony Yu,Alexandre Schubnel,
Nadege Hilairet, Fabrice Brunet
“Understanding deep-focus
earthquakes: laboratory microseismic
studies using synchrotron X-ray
diffraction/imaging and acoustic
emission”
9:45-10:00
+ Peter W. Chung, Chi-Chin Wu
“A parametric model for binary
dislocation junctions in any
hexagonal close-packed crystal”
10:00-10:15
+ Lorenzo Peroni ,M. Scapin and C.
Fichera
“High strain-rate and high
temperature behaviour of refractory
sintered metals”
10:15-10:30
+ Uhlmann, E.; Kawalla, R.; Lukas
Prasol; Schmidt, C.
“Influence of a non-basal initial
texture on the deformation ability of
the wrought magnesium alloy AZ31 at
high strain rates”
10:30-10:45
Coffee/Tea Break: 10:30-11:00
* Jun-Seok Yoon, Jeong Kim, BeomSoo Kang
“Predictive model on flexiblyreconfigurable roll forming for 3D
curved sheet metal”
*Heng Li, He Yang, Haiqing Zhang,
Xiao Hu
“Distortion plasticity and evolution of
alpha titanium tubular materials:
behaviors, mechanisms, constitutive
modeling and applications”
+ Swadesh Kumar Singh, Nitin
Kotkunde, Geetha Krishna, A. K.
Gupta
“Analysis of forming limit curve for Ti6Al-4V alloy at warm condition”
TuM-3 (8:30-10:45)
Computational Plasticity I
(Room: Rose Hall)
+ Eric R Homer, Jonathan Priedeman,
Cameron Rogers, David L Olmsted
“Crystallographic trends of energy and
mobility in incoherent twin boundaries”
+ Lisa Scheunemann, Daniel Balzani,
Dominik Brands,Jörg Schröder
“A comparison of different statistical
measures for the construction of
statistically similar rves for dual phase
steel microstructures”
+ Jan Dzugan, Pavel Konopik, Jiri
Kuzelka, Antonin Prantl,
Jan Ruzicka and Miroslav Spaniel
“Ductile damage parameters
identification for materials used in the
nuclear industry”
+Carmelo E. Majorana, Valentina A.
Salomoni, Gianluca Mazzucco,
Giovanna Xotta, Beatrice Pomaro
“ Multiscale analysis of concrete under
high temperature and fire”
TuM-4 (11:00-13:45)
Diffusive and displacive
deformation and
transformation processes
versus plasticity in honor of
Prof. Franz Dieter Fischer II
(Room: Mt. Zion)
TuM-5 (11:00-13:30)
TuM-6 (11:00-13:30)
Cyclic Plasticity & Fatigue II
(Room: Hanover)
Multi-scale modeling of plastic
behavior of materials in honor of
Prof. Cristian Teodosiu II
(Room: Rose Hall)
** Ingo Steinbach & Dean L.
Preston
** Clemens Mueller & Lothar
Wagner
* Dean L. Preston and Abigail
Hunter
“Solid-solid phase transformation
kinetics in shock waves”
* Lothar Wagner
“Fatigue performance of commercially
pure copper and titanium alloys after
severe plastic surface and bulk
deformations”
11:30-12:00
* Jiri Svoboda, F. D. Fischer
“Diffusion creep and volume changes
by dislocation climb in chemically
heterogeneous materials”
* Kenneth Reifsnider, R. Raihan, F.
Rabbi, J. Baker
“Multiphysics methods for analysis and
interpretation of microcrack
accumulation and fracture plane
development in heterogeneous
materials”
* José Luís Alves, M. C. Oliveira, L. F.
Menezes, O. Cazacu
“Micromechanical study revealing the
strong influence of the asymmetry
in plastic flow on void evolution and
ductility of porous polycrystals”
12:00-12:30
* Ingo Steinbach, Efim
Borukhovich, Adam Giessmann,
Philipp Engels
“Phase-field model of solid state
transformations with large distortion
and plastic activity”
* Jenifer Boedecker, Clemens Mueller
“Shot peening of ultrafine grained
(UFG) microstructures”
*Albert Van Bael, P. Eyckens, J.
Gawad, S. Coppieters, T. Kuwabara,
D. Roose and P. Van Houtte
“Multi-scale virtual experiments for the
calibration of differential hardening
models and applications for metal forming
FE simulations”
* Kai Kadau, Christian Amann, and
Phillip W. Gravett
“Method and system for probabilistic
fatigue crack life estimation”
* Lallit Anand
“Gradient plasticity”
11:00-11:30
12:30-13:00
13:00-13:15
13:15-13:30
* E. Semih Perdahcıoğlu, H.J.M.
Geijselaers, A.H. van den Boogaard
“Physically based modelling of
metastable austenitic and trip steel”
+Anxin Ma, Alexander Hartmaier
“A study of deformation and phase
transformation coupling for TRIPassisted steels”
** Albert Van Bael & George Z.
Voyiadjis
* George Z. Voyiadjis, Mohammadreza
Yaghoobi and Cheng Zhang
“Identification of characteristic
thermo/mechanical length scales in metals
from gradient plasticity and molecular
dynamics studies of nano-indentation”
+ Tudor Balan, Oana Cazacu
“Elastic-plastic micromechanical damage
model based on strain-rate plastic
potential”
Clement Keller, Laurent Duchêne,
Mitica Afteni,
Mihaela Banu, Anne-Marie Habraken
“Multi-scale modeling of micro deep
drawing of thin nickel sheets using
composite approach”
TuA-1 (14:30-17:45)
TuA-2 (14:30-17:00)
Granular Materials
(Room: Mt. Zion)
Deformation and Failure at
Micro and Nano Scales I
(Room: Hanover)
** Radoslaw L. Michalowski &
David Littlefield
** Werner Skrotzki & Yuris Dzenis
TuA-3 (14:30-17:15)
Microstructure based modeling
of damage and fracture: theory
and experiment, in honor of
Prof. David Wilkinson II
(Room: Rose Hall)
** Kaan Inal (++) & K. Ravi-Chandar
14:30-15:00
* Joe Goddard
“A survey of continuum models
for the viscoplasticity of granular
media”
* Yuris Dzenis
“On the mechanisms of superplastic
deformation of simultaneously
ultrastrong and tough continuous
nanofibers and composites”
* John L. Bassani, Kaan Inal and Raj
K. Mishra
“A phenomenological model for
microstructural evolution and predicted
effects on strain localization”
15:00-15:30
* Michael Kaliske, Ines Wollny,
Christoph Zopf
“Viscoplastic formulation for asphalt
pavement at loading of steady state
rolling”
* Hans J. Fecht
“Mechanics of interface controlled
metals and alloys on the nanoscale”
* A.J. Gross and K. Ravi-Chandar
“Real-time microscopic investigation of
deformation and failure in Al 6061‐T6”
15:30-16:00
* Poul V. Lade, Nina M. Rodriguez
and Eugene J. Van Dyck
“Failure of cross-anisotropic sand
under 3D stress conditions with
principal stress rotation”
* Hiromi Miura, M. Kobayashi
“Microstructural control and
strengthening of copper alloy by using
twinning”
* Kaan Inal, Raja K. Mishra
“Relationship between microstructure
evolution and the onset of localized
deformation in metallic alloys”
16:00-16:30
* David Littlefield
Bradley Martin and Kent Danielson
“Implementation and validation of
constitutive models for concrete”
* Werner Skrotzki, Andy Eschke,
Bertalan Jóni, Tamas Ungar, Laszlo
S. Tóth and Julia Ivanisenko
“Nanoplasticity of FCC metals”
*Zhijie Wang, Radoslaw L.
Michalowski
“Microfracture and contact fatigue in
granular geomaterials”
* Daniel Kiener, Marius Kreuzeder,
Mladen-Mateo Primorac, Alexander
Leitner, Manuel David Abad, Peter
Hosemann, Verena Maier
“Thermo-mechanical properties of fine
grained materials: Nanoporous vs.
nanocrystalline vs. nanocomposite”
* Ricardo A. Lebensohn
“Microstructure based and experimentally
validated modeling of ductile damage in
polycrystalline materials”
+ Jishnu J. Bhattacharyya, Sean
Agnew, Wilburn R. Wittington,
“Measuring and modeling the dynamic
behavior of a rare earth element
containing magnesium alloy, WE43B,
plate”
+ T. Pardoen, Laurence Brassart, S.K.
Yerra, L. Lecarme, F. Scheyvaerts, A.
Kumar K.C., G. Martin, B. Chéhab, C.
Tekoglu, C. De Vleeschouwer, L.
Jacques, E. Maire, J.-D. Mithieux, Y.
Bréchet, M. Véron, P.R. Onck, A.
Simar, L. Delannay
“Ductile damage and fracture in metallic
alloys combining soft and hard phases”
16:30-16:45
16:45-17:00
17:00-17:15
+ Thu Minh Le, Behzad Fatahi, and
Hadi Khabbaz
“Numerical optimisation to obtain
elastic viscoplastic model parameters
for soft clay”
* 30
+ Julie Lévesque, Kenneth.W. Neale,
Raja Mishra, Kaan Inal
“Modeling the cyclic behaviour of
magnesium alloys”
minutes key-note lecture, + 15 minutes invited presentation ** Chairs
++ Minisymposium Organizer
17:30-19:00 Cocktail Reception King Frog Bar (outside Lobby at Lobby Level)
Wednesday, January 7, 2015
Registration 8:00 AM-5:00 PM …..………………..…….………..………….(Room: Cornwall)
WM-1 (8:30-10:30)
Dynamic Materials Behavior
and Modeling I
(Room: Mt. Zion)
8:30-9:00
9:00-9:30
9:30-10:00
10:00-10:15
10:15-10:30
** George Gray III & Curt
Bronkhorst
* Curt Bronkhorst, N. Bourne, G.
T. Gray III, F. L. Addessio,
V. Livescu, E. K. Cerreta, M.
Ardeljan, M. Knezevic
“Deformation induced porosity
nucleation mechanisms in
polycrystalline metallic materials”
* Timothy C. Germann
“Slip, twinning, and phase
transformations in shock-loaded bcc
metals using large-scale molecular
dynamics simulations”
* George Gray III, Kenneth S.
Vecchio, Veronica Livescu
“The influence of microstructural
anisotropy and strain rate on the
shear response of 6061 and 7039
aluminum alloys”
+Akhtar S. Khan, Farhoud
Kabirian and Thomas GnäupelHerold
“Mechanical responses and texture
evolution of extruded az31
magnesium alloy at large strains for a
wide range of temperature and strain
rate
+ Saryu J. Fensin, Ellen K. Cerreta
, George T. Gray III
“When do interfaces become
important for failure?”
Coffee/Tea Break: 10:30-11:00
WM-2 (8:30-10:30)
WM-3 (8:30-10:30)
Dislocations
(Room: Hanover)
Computational Plasticity II
(Room: Rose Hall)
** Reiner Kirchheim& Robert Hull
** Otmar Kolednik & Erik Bitzek
* Robert Hull, Dustin Andersen,
Hamed Parvaneh
“Inverse simulation of dislocation
plasticity mechanisms in epitaxial films”
* Erik Bitzek, Polina Baranova,
Johannes J. Möller
“Fully 3D atomistic simulations of
fracture and crack-microstructure
interactions”
* Dorte Juul Jensen
“The role of dislocation boundaries on
the migration of grain boundaries
during recrystallization”
* Martin Heilmaier, F. Gang, C.
Seemüller，I. Sprenger
“High temperature creep of directionally
solidified alloys”
* Reiner Kirchheim
“Hydrogen enhanced dislocation
generation and motion”
* Otmar Kolednik, M. Sistaninia, J.
Zechner, J. Predan, F.D. Fischer
“Improvements of strength and fracture
resistance by thin, soft interlayers”
+ Nicolò Grilli, Koenraad G. F.
Janssens , Helena Van Swygenhoven
“Cyclic crystal plasticity constitutive
modeling of dislocation structures in
fatigued FCC metals”
+ Dariush Seif, Giacomo Po, Matous
Mrovec, Markus Lazar, Christian
Elsässer, Peter Gumbsch
“An atomistically enabled non-singular
anisotropic elastic representation of
near-core dislocation stress fields in
αiron”
* Aravind Murali, Seid Koric, Brian G.
Thomas
“Elasto visco-plastic model of steel
solidification with local damage and
failure”
WM-4 (11:00-13:15)
Multiscale Modeling of
Dislocations and Defect
Interactions II
(Room: Hanover)
**Jian Wang & Yang Xiang (++)
11:00-11:30
*Christophe Déprés, Christian
Robertson, Marc Fivel
“3D discrete dislocation dynamics
simulations of fatigue crack initiation
and propagation”
11:30-12:00
* Yang Xiang, Yejun Gu, Siu Sin
Quek, David J. Srolovitz
“Dislocation climb in discrete
dislocation dynamics”
12:00-12:15
12:15-12:30
12:30-12:45
12:45-13:00
13:00-13:15
13:15-13:30
+ Shuyang Dai, Yang Xiang, David
J. Srolovitz
“Dislocation structure and energy of
twist and semi-coherent (111) FCC
boundaries”
Jian Wang, Shuai Shao, Shijian
Zheng, Irene J Beyerlein, Nathan
Mara, Amit Misra
“Structure-deformation correlation of
multiple interface composites”
+ Caizhi Zhou, Sixie Huang
“Analysis of mechanical behavior of
metal-ceramic nanolayered
composites by dislocation dynamics
simulations”
+ Hung-Ju Yen,Xujie Lu, Nathan
Mack, Hsing-Lin Wang
“Nanographene formation through
high pressure chemistries”
+ Amit Samanta
“Atomistic analysis of the displacive
and diffusive processes during the
deformation of nanostructured
materials”
WM-5 (11:00-13:30)
Diffusive and displacive
deformation and
transformation processes
versus plasticity in honor of
Prof. Franz Dieter Fischer III
(Room: Mt. Zion)
Klaus Hackl & Thomas Antretter
(++)
* Thomas Antretter, Manuel
Petersmann, Thomas Waitz, Franz D.
Fischer, Svea Mayer, Helmut
Clemens
“Various approaches to investigating
the mechanics of martensitic
transformation in steels and
intermetallics”
* J. Kreyca, A. Falahati, Ernst
Kozeschnik
“Modeling the stress-strain curve of
polycrystalline metals using a state
parameter-based approach”
* Alex Umantsev and Machiko Ode
“Long-Period Stacking Fault Structures
of Magnesium-Base Alloys”
* Klaus Hackl
“Iterface motion in polycrystals geometrical constraints and variational
modeling”
* Meinhard Kuna, Andreas Burgold,
Stefan Prüger
“Computation of fracture parameters in
austenitic TRIP-steels”
WM-6 (11:00-13:30)
Role of Grain Boundaries in
Plasticity and Microstructure
Formation II
(Room: Rose Hall)
** Sean Agnew (++) & Haitham El
Kadiri (++)
* Leo Kestens, Tuan Nguyen Minh ,
Jurij Sidor, Roumen H. Petrov
“Modeling oriented nucleation during
recrystallization of metals with BCC
crystal structure”
* James M. Howe, Priya Ghatwai, Jing
Wu
“Mechanisms of random grain boundary
migration in pure aluminum and
implications for plasticity and
microstructural evolution”
* Haitham El Kadiri, Christopher D.
Barrett, Aidin Imandoust, Sean R.
Agnew
“Why do magnesium alloys develop sharp
textures?”
+ Motomichi Koyama, Takahiro
Sawaguchi, Kaneaki Tsuzaki
“Role of twin boundary on plasticity and
embrittlement in high Mn austenitic steel”
+ J.J. Bhattacharyya, M.R. Steiner, and
Sean Agnew
“Exploration of texture evolution during
grain growth of magnesium alloy AZ31B”
+ Jian Feng Nie, Y.M. Zhu
“Periodic solute segregation in twin
boundaries in Mg alloys”
+ Christopher D. Barrett, Haitham El
Kadiri
“Deformation faceting of twins in
hexagonal close-packed metals”
WA-1 (14:30-17:00)
Current Trends in Damage
and Fracture Mechanics I
(Room: Hanover)
** Holm Altenbach (++) & Michael
Brünig (++)
14:30-15:00
* Michael Brünig, Steffen Gerke,
Daniel Brenner, Marco Schmidt
“Phenomenological modeling of
stress-state-dependent damage and
failure behavior”
15:00-15:30
* Michael Johlitz, Benedikt Dippel ,
Alexander Lion
“Dissipative heating of elastomers: a
new modelling approach based on
finite and coupled thermomechanics”
15:30-16:00
16:00-16:15
16:15-16:30
16:30-16:45
16:45-17:00
* Holm Altenbach, Johanna
Eisenträger, Konstantin Naumenko
“Approximate rules for calculation of
notch stresses considering plasticity
and creep”
+ Sanda Cleja-Tigoiu
“Approaches to anisotropic damage
in crystalline elasto-plastic materials”
+ Błażej Skoczeń, Aneta Ustrzycka
“Evolution of radiation induced
micro-damage in ductile materials
subjected to time-dependent stresses”
+ Stephane J.M. Marcadet, Gongyao
Gu , Dirk Mohr
“Anisotropic hosford-coulomb model
to predict the onset of ductile
fracture”
+ Dong-Zhi Sun, Yingsong Ma,
Florence Andrieux
“Modeling of the influence of pore
morphology and triaxiality on damage
behavior of an aluminum die casting
alloy”
WA-2(14:30-17:15)
Plasticity and Micro-structural
Evolution in Nanostructured
Materials II (Room Rose:
Hall)
** Timothy J. Rupert & Garritt
J.Tucker (++)
* Garritt J. Tucker
“Deformation mechanisms and
interfaces during
microstructural evolution in
nanostructured materials”
* Christopher R. Weinberger, Hojun
Lim, Corbett C. Battaile
“Multiscale modeling of plasticity in
BCC iron: describing the role of
temperature, strain rate and states of
stress on yield”
* Alexander Hartmaier , Karthikeyan
Chockalingam, Rehman Hameed
“Atomistically informed continuum
models for plasticity and fracture of
tempered martensite”
* William W. Gerberich, Eric
Hintsala
“Scaling mechanics via nanoindentation
and nanopillars”
+ Jason R. Trelewicz
“Enabling tunable deformation
mechanisms in alloy nanolaminates
using hierarchical structures”
+ Timothy J. Rupert
“Connecting computational and
experimental tools for tracking the
evolution of nanostructured materials”
+ Mo-Rigen He, Gyuseok Kim ,
Daniel S. Gianola
“Controlling stress-driven
microstructural evolution in
nanocrystalline alloys via grain
boundary doping”
17:00-17:15
WA-3 (14:30-17:30)
Polymers
(Room: Mt. Zion )
** Oliver Kraft & Yoshiteru Aoyagi
* Yoshiteru Aoyagi, Atsushi Inoue,
Toshiki Sasayama, Yoshitoku Inoue
“Multiscale plasticity simulation on
crystalline polymer considering spherulite
structure of polypropylene”
* Martina E. Bachlechner
“Molecular-dynamics simulations of
mechanical failure in silicon and its
compounds”
* Vincenzo Guidi, Riccardo Camattari,
Valerio Bellucci, and Andrea Mazzolari
“Self-standing quasi-mosaic silicon
crystals as optical components for broadband hard x-ray optics”
* Mikhail Itskov, Roozbeh
Dargazany,Vu Ngoc Khiêm
“Inelastic behavior of filled elastomers: a
generalized micro-mechanical
framework”
* Jens Bauer, Almut Schroer, Ruth
Schwaiger, Oliver Kraft
“Strength and deformation behavior of 3D
light-weight hierarchical materials”
* Júlio C. Viana
“Deformation mechanisms and yielding
point dependence upon polymer
morphology”
17:15-17:30
* 30
minutes key-note lecture, + 15 minutes invited presentation ** Chairs
++ Minisymposium Organizer
19:00
AWARD DINNER (Ballroom)
Thursday, January 8, 2015
Registration 8:00 AM-5:00 PM …..………………..………………….……….(Room: Cornwall)
ThM-1 (8:30-10:30)
ThM-2 (8:30-10:30)
Computational Plasticity III
(Room: Mt. Zion)
Plasticity at High Strain Rate
and Pressure II
(Room: Hanover)
** David Ryckelynck & Tim Ricken
8:30-9:00
9:00-9:15
* Tim Ricken, Lukas Moj
“A continuum mechanical bi-phasic,
two-scale model for thermal driven
phase transition during solidification”
* Marc A. Rosen
“Extended linkages between exergy
and plasticity and elasticity”
** Alexey N. Volkov & Robert E.
Rudd
* Robert E. Rudd, A. Arsenlis, N. R.
Barton, R. M. Cavallo, A. J. Comley,
B. R. Maddox, H.-S. Park, C.
Plechaty, S. T. Prisbrey, C. E.
Wehrenberg, and B. A. Remington
“Multiscale modeling of shocked and
ramp driven tantalum at high pressure”
* Bruce A. Remington
“New regimes of plastic flow at extreme
conditions for materials science and
laboratory astrophysics”
9:15-9:30
9:30-9:45
* David Ryckelynck
“Recent advances in model reduction
for plasticity”
9:45-10:00
10:00-10:15
10:15-10:30
* Sung-Tae Hong, Doo-Man Chun,
Heung Nam Han, Jian Cao
“Electroplasticity of light-weight
metal alloys under a pulsed electric
current and its industrial
applications”
Coffee/Tea Break: 10:30-11:00
ThM-3 (8:30-10:30)
Microstructure based modeling
of damage and fracture: theory
and experiment, in honor of
Prof. David Wilkinson III
(Room: Rose Hall)
** Xin Wu & Eric Maire
* Eric Maire, Jerome Adrien
“Ductile damage studied by X-ray
computed tomography”
+ Xiaoqian Guo, P.D. Wu, H. Wang，
X.B. Mao, K.W. Neale
“Study of large strain behavior of OFHC
copper: the role of polycrystal plasticity
model”
+ Zohreh Keshavarz, Matthew R.
Barnett
“Twinning-detwinning in magnesium”
+Christopher S. Meredith and Jeffrey
T. Lloyd
“Deformation mechanisms and dynamic
behavior of fine-grained magnesium
alloy AMX602”
+ Saadi A. Habib and Akhtar S. Khan
“Mechanical response of Magnesium
alloy ZEK100 at different strain rates
and temperatures”
+Alexey N. Volkov, Bernard K.
Wittmaack, and Leonid V. Zhigilei
“Mesoscopic modeling of high strain
rate deformations and stress relaxation
in carbon nanotube films and forests”
+ David S. Wilkinson, Michael J.
Nemcko
“2 and 3 dimensional characterization of
deformation and fracture in magesnium”
+ Ernest L. Baker, James Pham, and
Tan Vuong
“An empirically based shaped charge
jet break-up model”
+Waqas Muhammad, Mohsen
Mohammadi, Jidong Kang, Raja K.
Mishra, Kaan Inal
“An elasto-plastic constitutive model for
evolving asymmetric and anisotropic
hardening behavior of AZ31B and
ZEK100 magnesium alloy sheets under
monotonic and reverse loading paths”
+ Xin Wu
“Microstructure entropy decay in grain
growth”
+ Arnaud Weck, Y. Alinaghian, M.
Asadi, T. Meunier, S. G.
Gopalakrishnan
"Ductile fracture studies using artificial
microvoids in metals and polymers"
ThM-4 (11:00-13:15)
Microstructure based
modeling of damage and
fracture: theory and
experiment, in honor of Prof.
David Wilkinson IV
(Room: Hanover)
11:00-11:30
11:30-11:45
12:15-12:30
12:30-12:45
ThM-6 (11:00-13:30)
Viscoplasticity and Cyclic
Plasticity in Nanocrystalline
and Ultrafine Grained
Materials I
(Room: Mt. Zion)
Multi-scale modeling of plastic
behavior of materials in honor of
Prof. Cristian Teodosiu III
(Room: Rose Hall)
** Mukesh K. Jain & Jidong Kang
(++)
** Steven Van Petegem & Timothy J.
Rupert
* Mahdi Habibnejad-korayem,
Mukesh K. Jain, Raja. K. Mishra
“Large deformation of magnesium
sheet at room temperature by preform
annealing”
* Shigenobu Ogata, Yunjiang Wang
“Molecular dynamics study of diffusive
and displacive deformation processes in
nano-plasticity”
*Jidong Kang, Zhuofei Yang,
David S. Wilkinson
“X-ray tomography study on effect of
porosity on fatigue life of AM60 alloy
die casting”
+ Patric A. Gruber, Jochen
Lohmiller, Oliver Kraft，Christian
Braun, Manuel Grewer, Rainer
Birringer
“Synchrotron-based in situ mechanical
testing of nanocrystalline metals and
alloys”
+ Mehran Tehrani, M. Safdari, M.
Al-Haik
“Nanocharacterization of creep
behavior of multi wall carbon nanotubes
/epoxy nanocomposite”
11:45-12:00
12:00-12:15
ThM-5 (11:00-13:30)
+ Marko Knezevic, Milan Ardeljan,
Thomas Nizolek, Irene J.
Beyerleinc, Nathan A. Marad,
Tresa M. Pollock
“Shear banding in two-phase
polycrystalline HCP/BCC
composites”
+ Li Jin, Jie Dong, JieSun, Alan A.
Luo
“In-situ investigation on the
microstructure evolution and
plasticity of two magnesium alloys
during three-point bending”
+Christopher Kohar, Mohsen
Mohammadi, Raja K. Mishra, and
Kaan Inal
“Influences of Yield Surface Shape on
the Deformation Behavior of Axial
Crush Response of Circular
Aluminum Tubes”
12:45-13:00
* David S. Wilkinson
“Void-controlled fracture in pure
metals”
+ Timothy J. Rupert
“Cyclic plasticity and microstructure
modification of nanocrystalline thin
films”
+ Steven Van Petegem, Zhen Sun,
Wolfgang Blum, Karsten Durst, and
Helena Van Swygenhoven
“Recovery in nanocrystalline Ni”
* Yoshihiko Uematsu, Toshifumi
Kakiuchi
“Effect of grain orientation on fatigue
crack Initiation behavior in AZ31
magnesium alloy”
* Laurent Tabourot, Ahmed Maati,
Pascale Balland, Mathieu Vautrot
“Influence of heterogeneities and of their
distribution on the elastoplastic behaviour
of metals”
+ Oliver Renk, A. Hohenwarter, R.
Pippan
“Doubling fatigue strength in NC
materials by annealing”
+Yannis P. Korkolis, Nengxiu
Deng,Toshihiko Kuwabara
“Biaxial loading-unloading behavior of a
dual-phase steel probed with cruciform
specimens”
+ D. Strickland, Y.Huang, D. Lee and
Daniel S. Gianola
“Robust Scaling of Strength and Elastic
Constants and Universal Cooperativity
in Disordered Colloidal Micropillars”
+ Sanda Cleja-Tigoiu , Raisa Pascan
“Non-local flow rules for dislocations and
disclinations in finite elasto-plasticity”
13:00-13:15
+ Omar Es-Said, Robert J. Reidel,
Hamid Garmestani, R. Marloth
“Abnormal grain growth (AGG) of kmonel 500 nickel alloy”
13:15-13:30
+ Hamid Garmestani, A.Tabei, S.Y.
Liang，O. Fergani
“High temperature nano-indentation
studies in fine grained Al-7075”
13:30-13:45
** Sanda Cleja-Tigoiu & Jean
Raphanel
* Jean Raphanel, A. Dimanov,
M.Bornert, M. Bourcier, A. Gaye, D.
Picard
“Two coexisting mechanisms of
irreversible deformation: crystal plasticity
and grain boundary sliding – the case of
sodium chloride”
+Takashi Matsuno, Cristian Teodosiu,
Daisuke Maeda, Akihiro Uenishi
“Mesoscale simulation of the damage
initiation and evolution in dual phase
steel”
+ Arjen Roos, R. Gatti, O. Jamond, A.
Vattré, F. Feyel, B. Devincre
“Boundary problems in dislocation
dynamics – the discrete continuous
model: theory and applications”
ThA-1(14:30-18:00)
Composites and multi-phase
metals, and Fatigue
(Room: Mt. Zion)
ThA-2(14:30-17:45)
Multi-scale modeling of plastic
behavior of materials in honor of
Prof. Cristian Teodosiu IV
(Room: Hanover)
** Christian Busch & Shaoxing Qu
** Oana Cazacu (++) & Kwansoo Chung
14:3015:00
* Qizhen Li , H. Xu, B. Tian
“Mechanical response of fiber
reinforced magnesium composites”
*Luís F. Menezes, J. L. Alves, Marta C.
Oliveira, D.M. Neto, P.D. Barros
“DD3IMP, a successful branch of cristian
teodosiu’s seeds and heritage
in FEA, plasticity and metal forming”
15:0015:30
* Tetsuya Matsuda, Keita Goto,
Nobutada Ohno
“Negative poisson's ratio of elasticviscoplastic angle-ply CFRP
laminates: homogenization analysis”
*Jeong Whan Yoon, Mariana
Paulino,Thomas B. Stoughton
“Study on yield function and plastic
potential under non-associated flow for
accurate earing prediction in cup drawing”
* Shaoxing Qu, Qiang Xu
“Nonlinear interfacial models for
composites”
*Kwansoo Chung, Wooram Noh,
Youngwoo Koh, and Xin Yang
“Failure predicttion for resistance spot
welded advanced high strength steel
sheets”
* Ikumu Watanabe, Gaku
Nakamura, Kei Ameyama, Kohei
Yuge
“Maximization of morphological
strengthening effect in dualcomponent microstructure”
* Oana Cazacu, J. L. Alves
“Micromechanical study revealing the
strong influence of the asymmetry in plastic
flow of the incompressible matrix”
* Jaan-W. Simon, Bertram Stier,
Brett A. Bednarcyk, Evan J.
Pineda, Stefanie Reese
“Modeling of damage in textile
composites on different scales”
* Paul Van Houtte, Q. Xie, A. Van Bael,
J. Sidor and J. Moerman
“Using an intermediary length scale in
statistical models for the prediction of
deformation textures”
+ Vadim V. Silberschmidt, Vaibhav
A. Phadnis, Anish Roy, Himayat
Ullah
“Impact damage in FRP composites”
+Myoung Gyu Lee, J.W. Lee, J.J. Ha, F.
Barlat
“Application of novel distortional
anisotropic hardening model to metal
forming simulations”
15:3015:45
15:4516:00
16:0016:15
16:1516:30
16:3016:45
16:4517:00
17:0017:15
17:1517:30
17:3017:45
17:4518:00
18:0018:15
+ Christian Busch, Bernd A.
Behrens, Anas Bouguecha, Milan
Vucetic, Christian Bonk, Ansgar
Hatscher, Stefan Huinink, Soonho
Jung, Sung Kyu Kim
“Numerical and experimental
investigations of deformation
behavior of high-manganese TWIP
steels”
+Dong-Kyu Kim, Dong-Kyu Kim,
Wan-Chuck Woo, Won-Woong
Park, and Yong-Taek Im
“Microstructure-based coupled
simulation of texture evolution during
deformation and recrystallization”
+ Maxim Serebreni and Akhtar S.
Khan
Fatigue crack growth in 4340 steel :
experiments and modeling
ThA-3 (14:30-16:45)
Challenges in Metal Forming
from Experiment to Modelling IV
(Room: Rose Hall)
** Heung Nam Han & Pierre-Yves
Manach
* F. Adzima, Pierre-Yves Manach, T.
Balan, S. Thuillier, L. Tabourot
“Towards the accurate modeling of ultra-thin
Cu-based alloy sheets.
Application to the forming of miniature
electrical connectors”
* Heung Nam Han, Moon-Jo Kim, SungTae Hong
“Electric current-induced phenomena during
deformation of metal alloys”
+ Javad Falsafi, Emrah Demirci, Vadim V.
Silberschmidt
“Modelling of sheet metal forming processes
for sustainable recycling”
+ Jacob Smith, John A. Moore, Wing
Kam Liu, Jian Cao
“A general anisotropic yield criterion for
damageprone materials”
+ Shenghua Wu, F.M. Andrade Pires, Abel
D. Santos
“Analytical and numerical prediction of
springback with hexagonal closed packed
metals”
+ Jeong-Yeon Lee, Frédéric Barlat,
Myoung-Gyu Lee
“Constitutive and friction modeling for finite
element analysis of springback”
+ Thomas Schneider, Marion Merklein
“Sheet-bulk metal forming – potential and
challenges of a new class of forming
processes”
+ Shenghua Wu, F.M. Andrade Pires, Abel
D. Santos
“A general yield criterion for orthotropic
metallic sheets under plane stress”
+ Jung Han Song, Seogou Choi, Sangmok
Lee, Daeyong Kim, Heung Nam Han,
Myoung-Gyu Lee and Sung Jun Park
“Effect of electric pulses on tensile properties
and drawability of light weight alloys”
+Nitin Chandola
“Role of tension-compression asymmetry
on buckling predictions”
+ Niko Manopulo, Frederic Barlat, Pavel
Hora
“Prediction of localized necking under
nonproportional loading using the modified
maximum force criterion and the
homogeneous anisotropic hardening model”
+ Benoit Revil Baudard(++),Oana
Cazacu
“Deformation and damage in titanium
materials”
Jonghyun Lee, Sagar Shah, Trenton Bush,
Dennis Helfritch, et al.
“Determination of processing parameters
window for the investigation on the
recrystallization of cold-sprayed titanium
alloys”
+Marko Knezevic, Daniel Savage, Milan
Ardeljan, Irene J. Beyerlein, Rodney J.
McCabe
“A strain-rate and temperature dependent
constitutive model for BCC metals
incorporating non-Schmid effects”
+ Salima Bouvier, Tales CarvalhoResende, Tudor Balan, Farid AbedMeraim
“Modelling the effect of microstructure
evolution on the macroscopic behavior of
single phase and dual phase steels.
Application to sheet forming process”
* 30
minutes key-note lect., + 15 minutes invited presentation ** Chairs++Minisymp. Organizer
17:30-19:00 Cocktail Reception King Frog Bar (outside Lobby at Lobby Level)
Friday, January 9, 2015
There are no presentations on the last day of the conference. This day may be
used for tours and/or for travel back.