Title: Format for abstracts DZA meeting 2008 Pierre Martina, Patricia Kooymanb a Department of Chemical Engineering, Vrije Universiteit Brussel, Pleinlaan 2, 1050 Brussels, Belgium b Catalysis Engineering, Delft University of Technology, Julianalaan 136, 2628BL Delft, The Netherlands Introduction TEXT: 2-page abstracts must be written using Tahoma 12 font (in this document). Single Line spacing is used for the text, 1.5 for the headers. Send abstracts as word document to DZA2008@vub.ac.be before September 30th 2008 [1]. Prepare a camera ready document. Restrict yourself to two pages maximum. Insert pictures and graphs in the text, most conveniently by inserting a textbox (no border line) and paste a graph (as picture) in it. Add a figure legend under this graph inside the text box to complete it. Flux (CO2) / 10-3 mol s-1 m-2 Results and Discussion 30 600 kPa 400 kPa 20 200 kPa 10 p = 101 kPa 0 200 300 400 T/K Figure 1: Single-component fluxes of CH4 and CO2 through the DDR membrane. The lines represent the model correlation. (10-point) Conclusions The abstracts will appear in the ‘Book of Abstracts’ of the symposium and handed out to all participants. References 1. X. Dupain, M. Makkee and J. A. Moulijn Appl.Catal.A: Gen. 2006, 297, 198-219. 2. M. T. Kreutzer, F. Kapteijn, J. A. Moulijn and J. R. Anderson In: Structured catalysts and reactors, second edition, A. Cybulski and J. A. Moulijn (Eds.), CRC Taylor & Francis: Boca Raton, USA, 2006 , pp. 393-433.