RESUME
(Brief)
Name:
Hamdan Naser Al-Ghamedy
Rank:
Associate Professor
Department:
Civil Engineering
Education:
ENGL.
English Language Program, University of Southern California, Los
Angeles, USA, 1978
B.S.
Civil Engineering (Minor: Math), Oklahoma State University, Stillwater,
USA, 1981
M.S.
Civil Engineering (Structural Engineering), Oklahoma State University,
Stillwater, USA, 1983
Ph.D.
Civil Engineering (Structural Engineering and Mechanics), University of
Colorado, Boulder, USA, 1986
Area of Specialization:
Structural / Computational Mechanics
Teaching:
Taught several undergraduate and graduate courses in mechanics, analysis, and finite
element method
Research Interest:
Computational mechanics: nonlinear finite element method, material modeling,
plasticity, mechanics of reinforced concrete, numerical analysis, buried pipelines
analysis and design, evaluation of faculty and students
Major Research Work Completed / in Progress:
New finite elements, concrete plasticity modeling, computational analysis, soil
materials models, pipelines stiffened-anchor plates, mechanics of reinforced concrete,
nonlinear shell analysis, analysis and design of buried pipelines, students and faculty
evaluation
Consulting Experience:
Computational analysis, Buried pipelines analysis and design: Consulting Services
Department, Saudi ARAMCO
Community Service:
Served in many department and university committees and participated in different
department and university activities
Publications (Incomplete List):
1.
Ghamedy, H.N., “Strength and Ductility of Tied-Confined Reinforced Concrete
Columns,” M.S. Research, Oklahoma State University, Stillwater, (1983).
2.
Ghamedy, H.N., “Nonlinear Finite Element Analysis of Inelastic Structures with
Applications to Reinforced Concrete,” Ph.D. Dissertation, University of Colorado,
Boulder, (1986).
3.
Al-Ghamedy, H.N., and Willam, K.J., “Layered Nonhomogeneous Curved Beam
Elements for Inelastic Analysis,” Computers & Structures, Vol. 37, No. 4, pp. 521-534,
(1990).
4.
Al-Ghamedy, H.N., “A Comparison Study of Different Failure Criteria as Applied to
Steel and Concrete Structures,” Engineering Second International Conference, AlAzhar University, Cairo, Egypt, pp. 124-135, Dec. 21-24, (1991).
5.
Al-Ghamedy, H.N., “The Influence of Shear Deformation and Stress on the Behavior
and Ultimate Loads of Under- and Over-reinforced Concrete Structures,” Arabian
Journal for Science and Engineering, Vol. 17, No. 2A, pp. 131-150, (1992).
6.
Al-Ghamedy, H.N., and Abduljauwad, S.N., “An Evaluation Study of Modified MohrCoulomb and Cap Models,” Ninth Engineering Mechanics Conference, American
Society of Civil Engineers, Texas, A & M University, College Station, Texas, pp. 717720, May 24-27, (1992).
7.
Abduljauwad, H.N., Al-Ghamedy H.N., and Aiban, S.A., “Evaluation of Bearing
Capacity and Settlement of Shallow Foundations Constructed on Common Soil types in
the Kingdom of Saudi Arabia,” Research Proposal submitted to KACST, 106 p., July,
(1992).
8.
Abduljauwad, S.N., Al-Buraim, I.M., and Al-Ghamedy, H.N., “Mixed Hardening Three
Invariants Dependent Cap Model,” Journal of Engineering Mechanics Division,
American Society of Civil Engineering, Vol., 118, No. 3, pp. 620-637, (1992).
9.
Abduljauwad, S.N., Faruque, M.O., Azeemuddin, M., And Al-Ghamedy, H.N., “Three
Invariant Dependent Cap Model with Application to a Cohesionless Soil,” Australian
Civil Engineering Transactions, IEAust., Vol. CE34, No. 4, pp. 355-367, Dec., (1992).
10.
Al-Ghamedy, H.N., “Design of Pipe Anchor Flanges,” Report submitted to Saudi
ARAMCO, Sep., (1993).
11.
Abduljauwad, S.N., and Al-Ghamedy, H.N., “A Generalized Three Invariants Cap
Model and Its Numerical Implementation to Study Soil-Foundation Interactions,” Fifth
International Conference on Computing in Civil and Building Engineering, ASCE,
Anaheim, California, pp. 561-568, June 7-9, (1993).
12.
Al-Ghamedy, H.N., “A Concrete Plasticity Model with Elliptic Failure Surface and
Independent Hardening/Softening,” Structural Engg. & Mechanics J., Vol. 2, No. 1, pp.
35-48, (1994).
13.
Abduljauwad, S.N., and Al-Ghamedy, H.N., “A Combined Hardening Model with Pore
Water Pressure Evaluation,” The Third World Congress on Computational Mechanics,
Chiba, Japan, Aug., (1994).
14.
Abduljauwad, S.N., Al-Ghamedy, H.N., Aiban, S.A., Dhowian, A., and Gutub, M.Z.,
“Evaluation of Bearing Capacity and Settlement of Shallow Foundations Constructed in
the Kingdom of Saudi Arabia ,” Research Proposal Submitted to KACST (1994).
15.
Al-Ghamedy, H.N., “Analysis and Design of Pipeline Stiffened Anchor Plate/Flange,”
Int. J. Pres. Ves. & Piping, Vol. 72, pp. 131-137, (1997).
16.
Abduljauwad, S.N., Al-Ghamedy, H.N., Al-Shayea, N.A., and Asi, I.M. “Behavior,
Analysis and Design of Buried Pipelines,” Project Proposal submitted to Saudi Aramco
and approved for funding (1998).
17.
Alghamdi, S.A., Mohiuddin, M.A., and Al-Ghamedy, H.N., “Analysis of Free
Vibrations of Helicoidal Beams,” Engineering Computation J., Vol. 15, No. 1, pp.89102, (1998).
18.
Abduljauwad, S.N., Al-Ghamedy, H.N., Al-Shayea, N.A., and Asi, I.M. “Behavior,
Analysis and Design of Buried Pipelines,” First Progress Report, prepared for Saudi
Aramco, April (1999).
19.
Balah, M. and Al-Ghamedy*, H.N. “A Higher Order Four Node Laminated Shell
Element for Finite Rotation Analysis” Fifth U.S. National Congress on Computational
Mechanics, Boulder, Colorado, U.S.A. pp. 161-162, August (1999).
20.
Abduljauwad, S.N., Al-Ghamedy, H.N., Al-Shayea, N.A., and Asi, I.M. “Behavior,
Analysis and Design of Buried Pipelines,” Second Progress Report, prepared for Saudi
Aramco Oct. (1999).
21.
Abduljauwad, S.N., Al-Ghamedy, H.N., Al-Shayea, N.A., and Asi, I.M., “Behavior,
Analysis and Design of Buried Pipelines,” Third Progress Report, prepared for Saudi
Aramco, April (2000).
22.
Al-Ghamedy, H.N. and Abduljauwad, S.N., “Students’ Evaluation of Faculty at
KFUPM: Students’ Opinion,” Proceedings of the Discussion Forum on Faculty
Evaluation by Students, KFUPM, pp. 20-34 May (2000).
23.
Abduljauwad, S.N., Al-Ghamedy, H.N., Al-Shayea, N.A., and Asi, I.M., “Behavior,
Analysis and Design of Buried Pipelines,” Fourth Progress Report, prepared for Saudi
Aramco, October (2000).
24.
Abduljauwad, S.N., Al-Ghamedy, H.N., Al-Shayea, N.A., and Asi, I.M., “Behavior,
Analysis and Design of Buried Pipelines,” Fifth Progress Report, prepared for Saudi
Aramco, April (2001).
25.
Abduljauwad, S.N., Al-Ghamedy, H.N., Al-Shayea, N.A., and Asi, I.M., “Behavior,
Analysis and Design of Buried Pipelines,” Draft Final Report, prepared for Saudi
Aramco, August (2001).
26.
Abduljauwad, S.N., Al-Ghamedy, H.N., Al-Shayea, N.A., Asi, I.M., Siddiqui, J.A.,
and Bashir, R., “Behavior, Analysis and Design of Buried Pipelines,” Final Report,
prepared for Saudi Aramco, November (2001).
27.
Abduljauwad, S.N., Al-Ghamedy, H.N., Al-Shayea, N.A., Asi, I.M., Siddiqui, J.A.,
and Bashir, R., Analysis and Design of Buried Pipelines, User’s Manual, ADBP
Program, prepared for Saudi Aramco, Dhahran, November (2001).
28.
Abduljauwad, S.N. and Al-Ghamedy, H.N., “Analysis and Design of Buried Pipelines
and Anchor Blocks,” Discussion Paper submitted to Saudi Aramco, January (2002).
29.
Balah, M. and Al-Ghamedy*, H.N., “Finite Element Formulation of a Third Order
Laminated Finite Rotation Shell Element,” Int. J. Computers & Structures, Vol. 80,
No. 26, pp. 1075-1990 (2002).
30.
Al-Shayea, N., Abduljauwad, S.N., Bashir, R., Al-Ghamedy, H. and Asi, I.,
“Determination of Parameters for Hyperbolic Model of Soils”, Geotechnical
Engineering Journal, Vol. 156, No. 2, pp. 105-117, (2003).
31.
Al-Ghamedy, H.N., “Re-evaluating, Revising, and Updating the Faculty Annual
Evaluation System at KFUPM,” Progress Report, Deanship of Academic
Development, KFUPM, September (2003).
32.
Abduljauwad, S.N., Al-Ghamedy, H.N., Balah, M., Siddiqui, J.A., and Al-Muhtaseb,
H., “Analysis and Design of Buried Pipelines,” Proposal submitted to Saudi Aramco
and Approved for Funding, April (2003).
33.
Abduljauwad, S.N., Al-Ghamedy, H.N., Balah, M., Siddiqui, J.A., and Al-Muhtaseb,
H., “Analysis and Design of Buried Pipelines,” First Progress Report prepared for
Saudi Aramco, June (2004).
34.
Abduljauwad, S.N., Al-Ghamedy*, H.N., Siddiqui, J.A., Asi, I.M. and Al-Shayea,
N.A., “Stability of Vertically Bent Pipelines Buried in Sand,” J. of Pressure Vessel
Technology, ASME, Vol. 126, No. 3, pp. 382-390, August (2004).
35.
Balah, M. and Al-Ghamedy*, H.N., “Third Order Shear Deformation Model for
Laminated Shells with Finite Rotations: Formulation and Consistent Linearization,”
Acta Meccanica Sinica, Vol. 20, No. 5, pp. 484-498, October (2004).
36.
Al-Ghamedy, H.N., “Pipeline stiffened anchors: Analysis and design considering
various variables and boundary conditions,” Under review (2005).
37.
Al-Ghamedy, H.N., “Factors Affecting Students’ Evaluation of Faculty,” Under
review (2005).
38.
Abduljauwad, S.N., Al-Ghamedy, H.N., Balah, M., Siddiqui, J.A., and Al-Muhtaseb,
H., “Analysis and Design of Buried Pipelines,” Second Progress Report prepared for
Saudi Aramco, January (2005).
39.
Balah, M. and Al-Ghamedy*, H.N., “Energy-Momentum Conserving Algorithm for
Nonlinear Dynamics of Laminated Shells Based on a Third Order Shear Deformation
Theory,” J. of Engineering Mechanics, ASCE, Vol. 131, No. 1, pp. 12-22, January
(2005).
40.
Al-Ghamedy, H.N., “Re-evaluating, Revising, and Updating the Faculty Annual
Evaluation System at KFUPM,” Final Report, Deanship of Academic Development,
KFUPM, May (2005).
41.
Al-Ghamedy, H.N., “Re-evaluating, Revising, and Updating the Faculty Annual
Evaluation System at KFUPM,” Executive Summary and Recommendations, prepared
for the Deanship of Academic Development, KFUPM, May (2005).
42.
Abduljauwad, S.N., Al-Ghamedy, H.N., Balah, M., Siddiqui, J.A., and Al-Muhtaseb,
H., “Analysis and Design of Buried Pipelines,” Third Progress Report prepared for
Saudi Aramco, August (2005).
43.
Al-Jamid, H, AL-Faraj, T. N., Al-Ghamedy, H.N., Bahlouli , H., Tabet , N., and
Shafique , M., “Guidelines to Control Plagiarism”, Report Prepared for the Office of
Vice Rector for Academic Affairs, (2005)
44.
Al-Ghamedy, H.N., Abduljauwad, S.N., Siddiqui, J.A., Al-Shayea, N.A., and Asi,
I.M., “Cover Requirement and Stability of Horizontally Bent Buried Pipelines,” Under
review (2006).
45.
Abduljauwad, S.N., Al-Ghamedy, H.N., Balah, M., Siddiqui, J.A., and Al-Muhtaseb,
H., “Analysis and Design of Buried Pipelines,” Final Report prepared for Saudi
Aramco, April (2006).
46.
Al-Ghamedy, H.N., Abduljauwad, S.N. and Siddiqui, J.A., “Factors Affecting the
Finite Element Modeling of Straight and Bent Buried Pipes,” Under Preparation
(2005).
_________________________________________
* Corresponding Author