Rainbow Lab
Objectives :




to develop skills measuring chemicals with a graduated cylinder.
to practice using the metric system.
to test precision and ability to follow directions.
to practice lab safety procedures.
Procedure:
Part 1:
1.
2.
3.
4.
5.
6.
Label 6 test tubes in order : A, B, C, D, E & F.
Fill a beaker half full with water. Use this to rinse your graduated cylinder and test tubes.
The second beaker is for contaminated waste water.
Into test tube A, measure 25 mL of RED liquid.
Into test tube C, measure 17 mL of YELLOW liquid.
Into test tube E, measure 21 mL of BLUE liquid.
Part 2:
1.
2.
3.
4.
5.
6.
7.
From test tube C, measure 4 mL and pour into test tube D.
From test tube E, measure 7 mL and pour into test tube D. Swirl.
From test tube E, measure 4 mL and pour into test tube F.
From test tube A, measure 7 mL and pour into test tube F. Swirl.
From test tube A, measure 8 mL and pour into test tube B.
From test tube C, measure 3 mL and pour into test tube B. Swirl.
Save your results. Measure the contents of each test tube and record how many mL were
found in each test tube.
8. Answer questions.
Data : Table 1 Test Tube Results (set up your own table using this as a model)
Test Tube
Color of Liquid
Amount of Liquid
(mL)
A
B
C
D
E
F
Total liquid Test Tubes A-F
mL
Analysis/Results:
1.
2.
3.
4.
5.
Name the colors that you created.
How many mL of liquid were in each test tube at the start of this lab?
Why is it important to follow directions exactly?
What would have happened if your measurements were not correct?
Look at your hands. Do you have any stains on your hands? If so, those stains represent
chemicals that would be on your skin right now!
6. How many mL of liquid did you have at the end of the lab? How many should you
have? What are some reasons why you may have more or less than when you started?
Conclusion:
2-3 sentences on what you learned.
Rainbow Lab
Teacher Notes
Materials :



Time Period : 1 1/2 - 2 - 45 minute classes
Food coloring : red, yellow, blue (ratio = 5 drops / 100 mL water)
large plastic trays, one per group of 4 students or per 2 students (cafeteria trays
work well…)
Each pair of students/group will have the following on their trays:













6 test tubes
test tube rack
1 or 2 pipettes
50 or 100 mL beaker (or larger) with Red liquid
50 or 100 mL beaker (or larger) with Blue liquid
50 or 100 mL beaker (or larger) with Yellow liquid
1 beaker of clean water
1 empty beaker
2 - 25 mL graduated cylinders
2 - 10 mL graduated cylinders
1 wax pencil
goggles
apron
Results:
Test Tube
A
B
C
D
E
F
Color of Liquid
Amount of Liquid
(mL)
Red
10
Orange
11
Yellow
10
Green
11
Blue
10
Purple
11
Total liquid Test Tubes A-F
mL
TIP: make sure the students rinse out the graduated cylinders and test tubes to avoid
contamination between measurements.
At the end of the lab, if all 6 test tubes look near level, you know that they were careful in
their measurements!
This is a great lab! The kids love it! Use it right before you do chemical reactions as a
practice so that when the students do use REAL chemicals, they have a feel for the
equipment and the safety procedures that need to be followed.
When done, students should have 63 mL of liquid. Spillage, incorrect measurements and
excess water from rinsing are factors to change the total.
You may be able to complete this lab in one class period, but it will most likely take a
period and half, if not two full classes. Be sure to have plenty of test tubes and racks to
save the results until the next day. Also, very important..... be sure to place a stopper over
the test tubes if they are to stay overnight, because some of the water can evaporate.