Page 1 of 3 Material Safety Data Sheet Issued Feb 2002 MOTORTECH OCTANE BOOSTER MT214 Hazardous according to criteria of WorkSafe Australia ______________________________________________________________________________________________________________________________________________________________________ Emergency Contact ____________________________________________________________________________ MMP INDUSTRIAL PTY.LTD. ACN 091 465 931 ABN 38 406 606 021 3-5 Hannabus Place MULGRAVE, NSW 2756. Australia Phone (02) 4577 6977 Fax (02) 4577 6940 E-mail WWW.MOMATE.COM.AU Peter Hoyland Phone (02) 4577 6977 After Hours Mobile Fax (02)4577 6940 0412 881 997 ____________________________________________________________________________ Identification ____________________________________________________________________________ Product Name Other Names Manufacturers Product Code UN Number Dangerous Goods Class Subsidiary Risk Hazchem Code Poisons Schedule Number Hazard category Risk phrases: R65: R22 Safety Phrases: S1 S2: S23 S24/25 S27 S51 S62 S16 Uses Motortech Octane Booster MT214 N/A MT214 N/A N/A N/A 3Y S5 Xn: Harmful May cause lung damage if swallowed Harmful if swallowed Keep locked up. Keep out of reach of children Do not breathe vapour. Avoid contact with skin & eyes Remove contaminated clothing immediately. Use only in well ventilated areas. If swallowed, do not induce vomiting: seek medical advice immediately and show label or this MSDS Keep away from sauces of ignition – no smoking. Do not use near heat or flame. Additive for petrol. ____________________________________________________________________________ Physical Description/Properties ____________________________________________________________________________ Appearance Boiling/Melting Point Vapour Pressure Solubility in Water Flash point Specific Gravity Flammability Limits Volatiles PH Coloured mobile liquid > 150 C <0.1 kPa @ 20 C Not miscible Approx 65 C 0.85 – 0.90 LEL 1% UEL 5% Approx 90% Not determined Page 2 of 3 Material Safety Data Sheet Issued Feb 2002 MOTORTECH OCTANE BOOSTER MT214 Hazardous according to criteria of WorkSafe Australia ______________________________________________________________________________________________________________________________________________________________________ ____________________________________________________________________________ Ingredients ____________________________________________________________________________ Chemical Name CAS No. Petroleum hydrocarbons Organometallics Additives 64741-44-2 - Proportion (%w/w) Approx 90% <10% <10 ____________________________________________________________________________ Health Hazard Information ____________________________________________________________________________ Acute Swallowed May cause lung damage if swallowed. Skin May cause mild irritation or dermatitis on repeated or prolonged exposure. Eye Highly irritating to the eyes Inhalation Not normally a hazard due to non-volatile nature of product but vapour or mist from heated product may cause irritation of the respiratory tract with chest pain and coughing. Chronic Repeated or prolonged skin contact may cause dermatitis. First Aid Ingestion DO NOT induce vomiting. Avoid aspiration into lungs. Give a glass of water or milk and seek medical attention. Eye Flush eyes with plenty of water for at least 15min. Seek medical advice. Skin Remove all contaminated clothing and wash affected area immediately with plenty of soap and water. Seek medical attention if symptoms persist. Inhaled Remove from further exposure. Seek medical attention. Advice to Doctor Treat symptomatically. Page 3 of 3 Material Safety Data Sheet Issued Feb 2002 MOTORTECH OCTANE BOOSTER MT214 Hazardous according to criteria of WorkSafe Australia ______________________________________________________________________________________________________________________________________________________________________ ____________________________________________________________________________ PRECAUTIONS FOR USE ____________________________________________________________________________ Exposure Standards Contains liquid hydrocarbons: TWA 5mg/cubic metre. STEL 10 mg/cubic metre Personal Protection Avoid contact with skin and eyes. Avoid inhalation of vapour. Wear rubber gloves and protective goggles if required. Use vapour respirator if required. Engineering Controls Use local exhaust ventilation to control mists or vapours. Additional ventilation may be required to maintain air concentrations below recommended limits. Flammability Combustible Liquid 3.4 ____________________________________________________________________________ SAFE HANDLING INFORMATION ____________________________________________________________________________ Storage and Transport Store and dispense only in well-ventilated areas away from heat and sources of ignition. Keep apart from oxidising substances. Spills and Disposal Wear protective clothing. Remove sources of ignition; ventilate spill area. Prevent entry into waterways and sewers. Absorb with inert material and dispose according to local, state and federal regulations. Fire/Explosion Hazard Combustible. During fire may release toxic gases. Extinguish using foam, dry chemical, carbon dioxide, vapourising liquid or water delivered as a fine spray. Document Compliance This document complies with the guidelines of WorkSafe Australia for completion of a Material Safety Data Sheet. The information presented has been derived from information available to Motor Mate Products Pty Ltd through recognised published sources and is considered to be reliable and accurate. As the way the product is handled and used is beyond our control, no warranty expressed or implied is made. Each user should consider the recommendations herein in relation to the intended use and confirm that they are applicable and sufficient. A Safety Data Sheet is not a substitute for expert advice on development of engineering and safe handling practices.