PRICE LIST 155
DWI TINPLATE (Beverage and Food)
Effective: 1 OCTOBER 2015
1.
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
1.10
1.11
1.12
2.
2.1
2.2
PREFACE
Orders are accepted in accordance with ArcelorMittal South Africa's General Conditions of Sale and the
stipulations of the corresponding Price List, and prices exclude V.A.T.
All prices are subject to a settlement discount of 2,5%, provided payment is made in accordance with
ArcelorMittal South Africa’s General Conditions of Sale.
All items are subject to “overage” and “underage”. (Refer paragraph 3.2 Page 2).
Material addressed by this price list is sold at a price per area (SITA) Système International Tinplate Area.
Unless otherwise stated, extras or deductions quoted in this price list are per SITA and each extra or
deduction is separate and explicit.
Normal testing and inspection as outlined in the specifications are carried out. When additional inspection
and/or testing is required, extras will be charged.
Prices and extras or deductions are those ruling on date of confirmed delivery and are subject to change
without prior notice.
When placing orders, customers must always specify the end use and ensure that this is compatible with
the ordered quality or specification. ArcelorMittal South Africa will then endeavour to deliver the material "fit
for purpose". However, if the end use is in general terms such as "stock", or "general engineering", the
product quality control will be in terms of the quality or specification only.
After orders have been accepted and confirmed, they cannot be cancelled in whole or in part or altered in
any manner whatsoever, except by special agreement with ArcelorMittal South Africa in writing. Should an
order be modified, the order as amended, it will be re-priced.
The publication of this price list does not place ArcelorMittal South Africa under any obligation to supply the
quoted qualities and sizes at all times. Availability remains subject to confirmation and the stipulations in
both the price list and relevant data sheets.
Before processing material, customers must ensure that it meets their requirements. Non-compliance in
this regard may invalidate a claim. ArcelorMittal South Africa does not prescribe any particular checking or
testing methods. Visual checks, simple dimensional checks and reference to test certificates and/or orders
should be performed beforehand.
The following will apply when determining the length of coils: The difference between the actual length and
the producer’s indicated length measured on any single coil shall vary between –0,2% and +0,4%
according to commercial law.
PRICE INFORMATION (Definitions)
BASE PRICE
Base Price is for ASSORTED and TRIMMED material
ITEM
An item is a product of a single technical specification (i.e. a single quality, width, thickness, coil size and
packaging, surface finish or condition, tin coating specification, and any additional processing parameters
required or requested.)
2.3
ITEM EXTRAS
Item extras apply to the total number of full slab coils ordered per item for delivery in a given calendar
month. Only identical items (full item description) will be combined for item extra determination (Best
Tonnage Ordered “BTO’d)
3.
3.1
GENERAL INFORMATION
MINIMUM ORDER QUANTITY
The minimum quantity per item ordered shall be in accordance with the following:
Standard items
Other items
One Full slab coil
Two full slab coils
Refer to Annexure 1 (page 8) for Standard items, and Annexure 2 (page 8) for applicable full slab coil mass
according to width.
2015 –10 – 01
Cancels and supersedes issue dated
2015 - 04- 01 REV 1
Page
1
PRICE LIST 155
DWI TINPLATE (Beverage and Food)
Effective: 1 OCTOBER 2015
3.2
OVERAGE/UNDERAGE
Please also refer to Annexure 3, Page 8, for tables.
The principle of delivering the proceeds of full slab coils is applicable in all cases.
3.2.1
OVERAGE:
a) Ordered mass plus 10%, applicable for cases where less than 10 full slab-coils is ordered per item.
This will be adjusted if a customer elects to have the underage adjusted as described in 3.2.2 c (for
standard items and other items)
b) Ordered mass plus one full slab coil, for cases where 10 or more full slab-coils per standard item are
ordered. For non-standard items an Overage of +10% will be allowed.
3.2.2
UNDERAGE:
Standard items:
a) For cases where only one full slab-coil is ordered, the Underage allowed is ordered mass minus 25%.
b) For cases where more than one full slab-coil is ordered, the Underage allowed is ordered mass minus
one maximum full slab-coil (nominal mass plus 10%).
c) However, in the case of standard items 2 to 4 slab-coil orders, customers may elect to have the
Underage adjusted to 50% of a full-slab-coil below the ordered mass. In such a case the Overage will
be adjusted to 60% of a full-slab-coil above the ordered mass. In this case the item extra for the whole
order will be based on the increased order quantity, should the delivered mass exceed the originally
ordered mass by more than a ½-slab coil.
Other items, not listed as standard items:
a) The Underage allowed is ordered mass minus one maximum full slab-coil (nominal coil mass plus
10%) when less than 10 full slab coils are ordered.
b) If 10 or more full slab coils are ordered, the Underage allowed will be minus 10%.
c) However, in the case of other available (non-standard) items 2 to 4 slab-coil orders, customers may
elect to have the Underage adjusted to 60% of a full-slab-coil below the ordered mass. In such a case
the Overage will be adjusted to 110% of a full-slab-coil above the ordered mass. In this case the item
extra for the whole order will be based on the increased order quantity, should the delivered mass
exceed the originally ordered mass by more than a ½-slab coil.
d) In cases where the underage applied results in less coils delivered than the original order, no penalty
due to the reduced order quantity will be applied.
e) A replacement order for the proceeds of two slab-coils may be placed at an item extra equal to the
original order, should the underage applied result in less material delivered than originally ordered.
3.3
3.3.1
MASS OF COILS
Mass of individual coils:
a) Orders for coils with a customer-specified exact mass will not be accepted.
b) Order quantity will be in multiples of full slab coils, according to Coil Mass Table per product width
(Annexure 2 page 8)
c) Individual coils despatched will have a packaging mass of nominal 10 ton, tolerance +5% -20%
d) Should the agreed customer maximum coil mass specification per destination indicate more than +5%
(>10,5t) as acceptable, the greater value will be used as despatch control mass (max handling).
2015 –10 – 01
Cancels and supersedes issue dated
2015 - 04- 01 REV 1
Page
2
PRICE LIST 155
DWI TINPLATE (Beverage and Food)
Effective: 1 OCTOBER 2015
PRICE CALCULATION METHOD
1.
Basis Price
R/sita
- Beverage / DWI Food Discount (if Applicable)
R/sita
+ Thickness
R/sita
+ Tin Coating
R/sita
--------------------------------------------------------------------------------------------------Subtotal Basis:
R/sita (A)
Extras:
2.
Quality
%
Order Quantity per item
%
Width
%
Packaging and Coil Size
%
Processing:
Surface Finish
%
Side Trim
%
Un-Assorted
%
DOS oil
%
Passivation
%
-------------------------------------------------------------------Subtotal Extras:
% over (A)
R/sita
---------------------------------------------------------------------------------------------------Sum total Coils ex works
R/sita (B)
2015 –10 – 01
Cancels and supersedes issue dated
2015 - 04- 01 REV 1
Page
3
PRICE LIST 155
DWI TINPLATE (Beverage and Food)
Effective: 1 OCTOBER 2015
1.1
BASIS PRICE
Basis DWI Electrolytic Tinplate Assorted and Trimmed (post tinning)
Rand per SITA
VAT exclusive
Product
End use code
DWI Beverage Can bodies
1500 103
1415.90
DWI Food – Two-piece cans
1550 039
1415.90
Discount
End use code
Adjustment
DWI Food 0,290mm
1550 039
DWI Food 0,310mm
1550 039
-64.40
DWI Bev 0,240mm
1500 103
-335.36
DWI Bev 0,255mm
1500 103
-358.04
DWI Bev 0,260mm
1500 103
-352.14
DWI Bev 0,280mm
1500 103
-369.55
DWI Bev 0,295mm
1500 103
-402.70
-60.24
Other Beverage thickness (enquiry)
1.2
POA
THICKNESS
THICKNESS – DWI BEVERAGE
Thickness
(mm)
Nominal mass
(Sita / t)
0,240
0,250
0,255
0,260
0,270
0,280
0,290
0,295
0,310
5,3079
5,0955
4,9976
4,8996
4,7181
4,5496
4,3927
4,3195
4,1093
Extra
Rand per Sita
VAT excl.
820
890
925
960
1035
1105
1180
1215
1325
THICKNESS – DWI FOOD
2015 –10 – 01
Thickness
(mm)
Nominal mass
(Sita / t)
0,290
0,300
0,310
4,3927
4,2463
4,1093
Cancels and supersedes issue dated
Extra
Rand per Sita
VAT excl.
1180
1250
1325
2015 - 04- 01 REV 1
Page
4
PRICE LIST 155
DWI TINPLATE (Beverage and Food)
Effective: 1 OCTOBER 2015
1.3
2.1
TIN COATING
Code
Designation
0073
2665
3157
1244
D25/30
E1
D20/30
D20/1
Nominal coating
mass
(g/m²)
D 2,80 / 3,36
E 2,80 / 2,80
D 2,24 / 3,36
D 2,24 / 2,80
Extra
Rand per Sita
VAT excl.
181.25
149.68
149.68
142.00
QUALITY EXTRA
Specification
Quality
Code
Annealing
Route
Available
Slab
Widths
Extra
TS 240 (DWI – Beverage)
259 003
BA
1000 & 1100mm
1.8%
TH 280 (DWI – Beverage)
108 002
CA
1000mm
1.8%
TH 280 (DWI Food)
108 001
Note 1) As modified, where applicable
CA
1000mm
3.0%
EN102021 1)
2.2.
ORDER QUANTITY PER ITEM EXTRA
All orders are subject to the extras in the item table given below.
Extra
Item
(Number of full slab coils) 1
1
2
3
4
5
6 and more
Standard Items 2
7,0%
5,0%
3,0%
1,5%
0,5%
0,0%
Other Available Items 3
Not Available
8,0%
5,5%
3,5%
2,5%
1,0%
Notes:
1
Please refer to Coil Mass Table (Annexure2 Page 8) for applicable full slab coil mass, according to width
2
All Standard Items. For listing please refer to Annexure 1, Page 8.
3
All other available items, not listed in Annexure 1, Page 8.
2015 –10 – 01
Cancels and supersedes issue dated
2015 - 04- 01 REV 1
Page
5
PRICE LIST 155
DWI TINPLATE (Beverage and Food)
Effective: 1 OCTOBER 2015
2.3.
WIDTH EXTRA
WIDTH EXTRAS (DWI Beverage)
Product Ordered Width
(mm)
778, 810, 842
2,0%
904, 921
1,5%
1032
0,0%
WIDTH EXTRAS (DWI Food)
Product Ordered Width
(mm)
936
2.4.
Extra
Extra
- 1,5%
PACKAGING EXTRA
Coil size 1)
Packaging Codes 2)
Basic Protective
Advanced Protective
Code 48
(Export) Code 49
Extra
0,0%
1,5%
~½-slab coil
NOTES:
1) Nominal coil mass 10 ton, Tolerance +5% -20%. Should the agreed customer maximum
handling coil mass specification per destination indicate more than +5% (>10,5t) as
acceptable, the greater value will be used as despatch control mass.
2) Please refer to Packaging Specifications for code descriptions.
2015 –10 – 01
Cancels and supersedes issue dated
2015 - 04- 01 REV 1
Page
6
PRICE LIST 155
DWI TINPLATE (Beverage and Food)
Effective: 1 OCTOBER 2015
2.5.
PROCESSING EXTRAS
2.5.1
SURFACE FINISH
Code
3173
2.5.2
0751
2.5.4
2.5.5
2.5.6
Extra
0,0%
DOS OIL
Code
2.5.3
Designation
Light Grit Matt (un-melted)
Oil type
(di-octyle
sebacate)
Normal
DOS
Applicable
Coating
Film weight (aim)
Average per side
Equal
4 + 2mg/ sqm
Extra
0,0%
PASSIVATION
Code
Description
Total Chromium Values per Surface
Code
Area
2694
300
1,0 – 3,0 mg / sqm
2695
311 *
3,5 – 9,0 mg / sqm
*Only available for DWI Food
Extra
0,2%
0,5%
SIDE TRIMMING
Code
Process Location
2602
Side Untrimmed
2092
Trimmed at DWI Line (pre-tinning)
2093
Trimmed at Preparation Line 2 (post-tinning)
Extra
- 1,5%
- 0,7%
0,0%
SORTING
Code
1710
Extra
0,0%
Process
ASSORTED COILS
CERTIFICATION
The Customer has the option to indicate requirement of the following certification:
Test and analysis certificate required
(Code 2172)
Analysis certificate required
(Code 2173)
Test and analysis certificate not required
(Code 1010)
Analysis certificate not required
(Code 1011)
2015 –10 – 01
Cancels and supersedes issue dated
2015 - 04- 01 REV 1
Page
7
PRICE LIST 155
DWI TINPLATE (Beverage and Food)
Effective: 1 OCTOBER 2015
STANDARD ITEMS Note1)
ANNEXURE 1:
No
Can
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
SL 200ml
SL 250ml
SL 250ml
SL 275ml
330ml S
440ml
440ml
440ml
330ml
330ml
330ml
330ml
330ml
Food
Food
1)
2)
Specification
TS 240 (DWI Beverage)
TS 240 (DWI Beverage)
TH 280 (DWI Beverage)
TH 280 (DWI Beverage)
TH 280 (DWI Beverage)
TS 240 (DWI Beverage)
TH 280 (DWI Beverage)
TH 280 (DWI Beverage)
TS 240 (DWI Beverage)
TS 280 (DWI Beverage)
TS 240 (DWI Beverage)
TS 240 (DWI Beverage)
TS 240 (DWI Beverage)
TH 280 (DWI Food)
TH 280 (DWI Food) Note2
Code
Annealing
Route
259 003
259 003
108 002
108 002
108 002
259 003
108 002
108 002
259 003
108 002
259 003
259 003
259 003
108 001
108 001
BA
BA
CA
CA
CA
BA
CA
CA
BA
CA
BA
BA
BA
CA
CA
Thick
(mm)
0.240
0.260
0.260
0.295
0.260
0.280
0.280
0.280
0.295
0.295
0.295
0.255
0.295
0.290
0.310
Width
(mm)
842
842
842
842
810
778
778
904
810
810
921
1032
1032
936
936
Tin
Coating
D 25/30
D 25/30
D 25/30
D 25/30
D 20/1
D 20/30
D 20/30
D 20/30
D 20/ 1
D 20/ 1
D 20/ 1
D 20/ 1
D 20/ 1
D 20/30
D 20/30
Surface
Light Grit Matt
Light Grit Matt
Light Grit Matt
Light Grit Matt
Light Grit Matt
Light Grit Matt
Light Grit Matt
Light Grit Matt
Light Grit Matt
Light Grit Matt
Light Grit Matt
Light Grit Matt
Light Grit Matt
Light Grit Matt
Light Grit Matt
Requests for additional Standard items can be made via your Account Manager. Such requests will be submitted for
evaluation and approval by ArcelorMittal South Africa Management.
Phasing out
ANNEXURE 2:
COIL MASS TABLE
Slab Width
(mm)
Width Range
Applicable to slab
Product Width
1000 slab
1000 slab (MC1 26 - CA)
1100 slab
758 to 867mm
758 to 936mm
868 to 1032mm
778; 810; 842(BA)
842; 936
904; 921; 1032
Nominal
Full-Slab-Coil Mass
(Order quantity unit)
(ton)
16
16
18
Please refer to text Page 2 Paragraph 3.3
2015 –10 – 01
Cancels and supersedes issue dated
2015 - 04- 01 REV 1
Page
8
PRICE LIST 155
DWI TINPLATE (Beverage and Food)
Effective: 1 OCTOBER 2015
OVERAGE / UNDERAGE
ANNEXURE 3
(DESPATCH TOLERANCES ON ORDER TONNAGE PER ITEM)
The principle of a discrete full-slab-coil as smallest sales unit applies
(Please also refer to text on Page 2 Paragraph 3.2)
Number of
Full Slab Coils*
STANDARD ITEM
%OVER / % UNDER
STANDARD ITEM
OPTION2 (Code2010)
%OVER / % UNDER
1
+10/-25
Not Applicable
2
+10/-55
+30/-25
3
+10/-37
+20/-17
4
+10/-28
+15/-13
5
+10/-22
6
+10/-18
7
+10/-16
8
+10/-14
9
+10/-12
10
+10/-11
>10
Note *: FSC = Full Slab Coil
Not Applicable
+1 FSC / - 1,1 FSC*
Number of
Full Slab Coils
NON-STANDARD ITEM
%OVER / % UNDER
NON-STANDARD ITEM
OPTION2 (Code1020)
%OVER / % UNDER
2
+10/-55
+55/-30
3
+10/-37
+36/-20
4
+10/-28
+27/-15
5
+10/-22
6
+10/-18
7
+10/-16
8
+10/-14
9
+10/-12
10
+10/-11
>10
+10/-10
2015 –10 – 01
Cancels and supersedes issue dated
Not Applicable
2015 - 04- 01 REV 1
Page
9