EC Material Safety Data Sheet
Super-Chlor
1
EC MATERIAL SAFETY DATA SHEET.
1.
Product and Manufacturer Identification:
Trade Name:
Manufacturer:
2.
Industrial Strength thickened Bleach
Microchem Limited
Belmont Industrial Estate
Durham
DH1 1TN
Tel: 0191 3869988
Fax: 0191 3862722
Email: info@microchem.co.uk
Composition and Information on Ingredients
Substance Name
Sodium Hypochlorite
Lauryl dimethylamine oxide
Sodium Hydroxide
Sodium Ether Sulphate
Non-Classified Substances and To 100%
3.
Cas number
7681-52-9
70592-80-2
1310-73-2
13150-00-00
EINECS
231-668-3
274-687-2
215-185-5
Risk phrase
R31-34
R41,38
R35
R38-41
Hazards Identification:
Health Effects - Inhalation:
Not expected to be a hazard under normal conditions of use.
Health Effects – Ingestion:
May cause significant systemic effects if swallowed. Signs and symptoms include possible nausea and/or
vomiting.
Health Effects – Skin:
May cause skin irritation.
Health Effects – Eyes
May cause irritation to eyes accompanied by redness and/or burning, which may be severe with tear
formation.
Environmental Effects:
Not expected to cause significant environmental impact.
4.
First Aid Procedures
Skin Contact:
Drench the affected skin with running water to remove all traces of product.
Eye Contact:
Bathe the eye with running water for 10 minutes.
Ingestion:
Do not induce vomiting. If swallowing has occurred drink plenty of water and seek
medical advice immediately.
Never give anything by mouth to an unconscious person.
Inhalation:
Remove casualty from exposure and allow to rest.
MSDS
12/02/2016
EC Material Safety Data Sheet
Super-Chlor
2
EC MATERIAL SAFETY DATA SHEET.
5.
Fire Fighting Measures
Not classed as flammable however if involved in fire may emit noxious fumes.
Extinguish with Carbon dioxide (C02), Dry chemical powder or foam.
Keep containers cool by water spray.
Heating may cause pressure rise with risk of container bursting.
In serious fire it may be necessary to wear compressed air breathing apparatus.
6.
Accidental Release Measures
Small Spillages:
Hose down with cold water.
Large Spillages:
Construct temporary dikes with any suitable inert material to prevent the product spreading.
Transfer to suitable containers for recovery or disposal.
Wash down remaining material with water.
Personal Precautions:
Wear appropriate protective clothing. See Section 8.
Material may create slippery conditions underfoot.
Environmental Precautions:
Try to prevent the material from entering drains or watercourses.
Advise Authorities if large spillage has entered watercourses or sewer or has contaminated soil or
vegetation.
7.
Handling and Storage
Handling:
Avoid contact with eyes, skin and clothing.
Keep container tightly closed when not in use.
Do not mix with acids.
Storage:
Store away from sources of heat or ignition.
Store in original containers as supplied by manufacturer.
8.
Exposure Controls/ Personal Protection
Occupational Exposure Standards:
No occupational exposure limit listed in current editions of EH40 (UK Health and Safety Executive
Threshold Limit Values) (American Conference of Governmental Industrial Hygienists.)
The following protection is recommended.
Respiratory Protection:
Hand Protection:
Body Protection:
Eye Protection:
MSDS
Not normally required in well ventilated areas.
Rubber gloves.
Wear protective overalls.
Suitable safety glasses or goggles.
12/02/2016
EC Material Safety Data Sheet
Super-Chlor
3
EC MATERIAL SAFETY DATA SHEET.
9.
Physical and Chemical Properties
Physical State:
Colour:
Odour:
pH Value:
Boiling Range/Point:
Melting Point:
Flash Point:
Solubility in Water:
Density (kg/m3)
Viscosity:
10.
Clear Semi-Viscous Liquid
Colourless
Minimal
12-12.5
N/A
N/A
N/A
Soluble
ca 1050 - 1090 at 20 °C
N/A
Stability and Reactivity
Stability:
Stable under normal conditions.
Conditions to avoid:
Protect form frost.
Do not mix with acids.
Hazardous Decomposition Products:
Non Known.
11.
Toxicological Information
Acute Toxicity:
Irritation Skin:
Irritation Eyes:
12.
Harmful by ingestion.
This material may be an irritant to the skin.
Expected to cause irritation to the eyes.
Ecological Information
Ecological Overview.
Mobility:
Persistence / Degradability:
Bioaccumulation:
Ecotoxicity:
13.
Not expected to cause significant environmental impact.
The product will dissolve in water.
The product is readily biodegradable.
Inappropriate.
The product is toxic to aquatic organism.
Disposal
Product Disposal:
When disposing of waste or surplus material avoid contact with the eyes and skin. See Section 8 for
personal protection equipment.
Where practical, surplus material should be recovered and recycled.
Dispose of in accordance with all applicable local and national regulations.
Seek advice from local waste authority or supplier for guidance.
Container Disposal:
Labels should not be removed from containers unless thoroughly washed and cleaned.
Dispose of empty containers with care.
MSDS
12/02/2016
EC Material Safety Data Sheet
Super-Chlor
4
EC MATERIAL SAFETY DATA SHEET.
14.
Transport Information
IMDG: UN.No
8177 1791
15.
Hazard Class
8
Packaging Group
111
Regulatory Information
Labelling Information:
Irritant
Risk Phrases:
R22:
Harmful if swallowed.
R36/38: Irritating to eyes and skin.
R31:
Contact with acid liberates toxic gas.
Safety Phrases:
S2:
Keep out of reach of children.
S26:
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S28:
After contact with skin, wash with plenty of water.
S25:
Avoid contact with eyes.
S24:
Avoid contact with skin.
S27:
Take off immediately all contaminated clothing.
S36/37/39: Wear suitable protective clothing, gloves & eye/face protection.
Addition Classification Information.
This product is classified on the basis of information compiled by CESIO on the toxicological properties of
surfactants.
16.
Other Information
MSDS first issued
7th March 2005
MSDS Data revised
31st March 2005
Uses and restrictions:
Bleach
Disclaimer
MSDS
12/02/2016
EC Material Safety Data Sheet
Super-Chlor
5
The information contained in this document is intended to describe the product only in terms of health &
safety and environmental requirements for the purpose of its safe handling, use and disposal and is to the
best of the supplier’s knowledge and belief correct. It is strongly advised the customer should satisfy
themselves (by appropriate testing if necessary) that the product is suitable for their purpose and conditions
of use and that their facilities and arrangements are suitable for handling or using the product.
This information does not comprise a technical or performance specification for the product.
MSDS
12/02/2016