1
Abuela
Lady Liberty and Torch
1. Set diamond plate base in place.
2
2. Set Lady on base pins.
3. Remove torch from cart keeping in mind that one tine of the Lady is protruding down
from the cart shelf.
4. Set Torch on pins on base.
3
5. Plug cords together between torch and Lady.
6. Use hex tool to engage roto lock, once aligned.
7. Place top of torch and engage roto lock.
4
8. Place tines on Lady and engage roto locks.
9. Power run from ceiling is on the corner of tine # 3
< chord here
5
Abuela Store
1. Set floor in place.
2. Set Park wall on floor. Wall sits half on/off the floor piece and registers in holes in the
floor.
3. Set store wall.
6
4. Roto lock walls together.
5. Set cabinet in store and roto lock to wall from inside of cabinet.
6. Place single cloud in hole on top of park wall.
7
7. Place cloud/Rosalba/Abuela arch in holes on top corners of walls.
8. Power access from ceiling is on the inner corner of park wall to access panel in city
scape
Place the view-box
as desired.