5058 version 5
12-Feb-16
1 of 4
LEATHER - BOTTOM STOCK, MAKING
AND LASTING
Cement footwear bottoms by autocementing machine and attach fillers
level:
2
credit:
6
planned review date:
November 2005
sub-field:
Footwear and Leather Trades
purpose:
People credited with this unit standard are able to: describe
and set up auto cementing machines; cement bottoms and
insert bottom fillers and/or shanks to industry specified
performance and company quality standards; maintain the
machine, and demonstrate knowledge of the Health and
Safety in Employment Act 1992.
entry information:
Open.
accreditation option:
Evaluation of documentation by NZQA and industry.
moderation option:
A centrally established and directed national moderation
system has been set up by Competenz.
special notes:
Specified industry performance is 55% BSI performance or
equivalent. BSI performance is the British Standards
Institute internationally recognised performance system
(BS3138) where 100% is the standard expected from a
competent fully qualified performer using the correct
methods and taking the allowed rest, working briskly, and as
though on an incentive. Other comparable rating or
performance systems such as the 60/80 system are
acceptable, with the appropriate performance adjustment.
Company safety requirements conform to the Health and
Safety in Employment Act 1992.
 New Zealand Qualifications Authority 2016
5058 version 5
12-Feb-16
2 of 4
LEATHER - BOTTOM STOCK, MAKING
AND LASTING
Cement footwear bottoms by autocementing machine and attach fillers
Elements and Performance Criteria
element 1
Describe and set up auto cementing machine.
performance criteria
1.1
Purpose of bottom cementing is explained.
1.2
Machine parts and equipment are identified and described in terms of function
and operation.
Range:
auto cementer – cement reservoirs, cement lines, brushes,
clamps, operating controls.
1.3
Select cement to meet product specification and work ticket requirements.
1.4
Programme meets product specification and work ticket requirements.
1.5
Brushes are cleaned and/or changed according to company requirements and
practice and installed according to manufacturer's specification.
1.6
Select bottom fillers and/or shanks to meet product specification and work
ticket requirements.
element 2
Cement bottoms and insert bottom fillers and/or shanks.
performance criteria
2.1
Work is completed to specified industry performance standard.
2.2
Cementing is completed to company quality standards.
Range:
cement line, cement penetration, complete coverage, no pooling,
only on bottom.
 New Zealand Qualifications Authority 2016
5058 version 5
12-Feb-16
3 of 4
LEATHER - BOTTOM STOCK, MAKING
AND LASTING
Cement footwear bottoms by autocementing machine and attach fillers
2.3
Bottom fillers and/or shanks are inserted to company quality standards.
Range:
2.4
well stuck in, position;
fillers only – no wrinkles.
Documentation is completed to company requirements and practice.
element 3
Maintain machine.
performance criteria
3.1
Machine is cleaned and maintained to company requirements.
3.2
Machine is lubricated to company requirements and manufacturer's
specification.
element 4
Demonstrate knowledge of the Health and Safety in Employment Act 1992.
performance criteria
4.1
Duties of the employer under the Act are explained.
4.2
Duties of the employee under the Act are explained.
4.3
Hazard management procedures for the workplace are listed.
4.4
Safety equipment use is demonstrated.
4.5
Accident procedure is described in relation to the requirements of the Act.
Comments on this unit standard
Please contact Competenz info@competenz.org.nz if you wish to suggest changes to the
content of this unit standard.
 New Zealand Qualifications Authority 2016
5058 version 5
12-Feb-16
4 of 4
LEATHER - BOTTOM STOCK, MAKING
AND LASTING
Cement footwear bottoms by autocementing machine and attach fillers
Please Note
Providers must be accredited by the Qualifications Authority or a delegated interinstitutional body before they can register credits from assessment against unit standards
or deliver courses of study leading to that assessment.
Industry Training Organisations must be accredited by the Qualifications Authority before
they can register credits from assessment against unit standards.
Accredited providers and Industry Training Organisations assessing against unit
standards must engage with the moderation system that applies to those standards.
Accreditation requirements and an outline of the moderation system that applies to this
standard are outlined in the Accreditation and Moderation Action Plan (AMAP). The
AMAP also includes useful information about special requirements for providers wishing
to develop education and training programmes, such as minimum qualifications for tutors
and assessors, and special resource requirements.
This unit standard is covered by AMAP 0030 which can be accessed at
http://www.nzqa.govt.nz/framework/search/index.do.
 New Zealand Qualifications Authority 2016