Hillsborough Ballpark Bathroom BIDS ARE DUE BY 5:00 PM DECEMBER 14, 2015. The Town of Hillsborough is excepting Bids for the construction of Bathrooms at Grimes Athletic Field. Attached are building specifications, the plans can be viewed at the Town Office, 27 School Street, Hillsborough, NH 03244. Scope of work 1. The General Contractor is responsible for obtaining trade permits, the Town of Hillsborough will wave permit fees. The General Contractor is responsible for scheduling all necessary inspections and obtaining all required sign-offs necessary to obtain a final Certificate of Occupancy. 2. The General Contractor shall provide proof of adequate insurance. 3. The General Contractor is responsible for all temporary utilities. 4. The General Contractor is responsible for all trash removal including trash generated by Subcontractors, site to be cleaned daily. A pre bid meeting is scheduled for Monday December 7, at 3:00 PM Building Specifications for Bidding Excavate for 24’X16’ structure to 48” below finished grade Install 16”wide x 8” thick 3000psi continuous footing with 2 rows #4 rebar and keyway Form and pour 8”x 48” 3000psi concrete walls for a 16’x24’structure with 2 rows of 2-#4 rebar, placed approximately at bottom 1/3 and top 1/3 of wall horizontal and #5 rebar at 4’ on center vertical 6’ long from footing through floor slab to incorporate in block wall. All concrete work to conform to ACI standards, 318 and 332 Backfill and compact foundation with ¾” crushed gravel in 6” lifts inside to top of foundation wall and outside to finish grade Coordinate and Install PVC, DVW per plan specification and 2009 IPC below grade, to include 2 floor drains. Tie into predetermined location. Form and Pour 26’x16’ Reinforced #6 WWF 3500 psi concrete slab Place 8”x8” x 16” insulated CMU to 96” HGT. with bond beam course at Top of Wall, to a wall height of 8’8” with 12”x ½” Galvanized anchor bolts at 4’ centers as per plan specifications Form and Pour 10’x24’ 4000 PSI Exterior Concrete wheelchair access Ramp as per plan w/max rise 1”/12” Install 7- Anderson 2813 sliding White vinyl clad windows as per plan Install 2- 3’0”x 6’8” LH metal doors/w Brushed Chrome hardware and door closers in masonry frames as per plan Install 1- 3’0” x 6’8” RH metal door/w Brushed Chrome hardware and door closer in masonry frame as per plan Install interior partitions using 4” CMU to 8’8” HGT as per plans Install 1 pressure treated 2”x8” continuous sill plate and 1 KD 2”x8” continuous sill plate bolted to top of wall as per plan Spec. out and install engineered truss’ as per plan with all details for roof construction per plans and specifications including, trim, blocking, strapping, standing seam metal roofing, (color to be chosen by others). Plumbing fixtures purchase and install specific or equal as follows; 1-Willoughby Industries CWBF-2-RPB-HC Outdoor Bottle Filler w/Drinking Fountain 2-Just Manufacturing JTL-60-S 2 bowl Lavatory system w/automatic faucets 1-Willoughby Industries UW-1317-HEU-FA series Stainless Urinal w/0.5 GPF flush valve 3-Willoughby Industries ETF-490-FM-12”-HC Stainless Water Closets w/1.28 GPF Automatic Flush valve 2-24” Grab Bars ADA 2-36” Grab Bars ADA 3- Uline Model H-2546 Toilet Paper Dispensers 2-Kimberly Clark Model H-3448 Automatic Paper Towel Dispensers 2- Bobrick Model B-4112 Soap Dispensers 1-Mustee Model 65M Mop Service Basin w/Model 63.600-A Service Faucet 1-Rinnai model RL94iP Lp Tankless Hot Water Heater Bath Stall service doors as per plan, Global or Equal 100 amp service panel w/Breakers Electrical as per 2014 NEC w/ Automatic motion sensor interior lighting and Exterior lighting