1. R.Ramaswamy and S.Mohan "A Novel approach to the study of chemical oscillators” Current Science. 54 (20), (1985) 1063-1066 2. R.Venkatachalam S.Guruviah and S.Mohan "Electropolishing of Stainless steel from low concentrated Phosphoric acid electrolyte", Metal Finishing. U.S.A. 89, (1991) 47-50. 3. K.L.N. Phani, S.Mohan and R.Venkatachalam, "UPD copper electrochemically treated polycrystalline AU surfaces", Proc.Indian Acad. sciences, Chemical Science, Bangalore, 103 (5) (1991) 677-683 4. S.Mohan and R.Ramaswamy, "Uncatalysed oscillations in the bromate sulphuric acid system", Transaction of the SAEST, 27, (1992)149-152. 5. R.Venkatachlam and S.Mohan,"Electropolishing of stainless steel using Pulse technique", Transaction of Institute and Metal finishing, Assoc. India, 1(4) (1992) 1321 6. S.Mohan and R.Ramaswamy,"Chemical oscillation in the catalysed bromate system with sulphanilic acid as the substrate'', Trans of SAEST (India), 28(2) (1993) 103-105 7. S.Mohan and G.N.K. Ramesh Bapu,"Electrodeposition of Nickel-PTFE Polymer composites", Plat. Surf. Fin., 82 (4), (1995) 86-88 8. S.Mohan and R.Venkatachalam,"Electropolishing of stainless steel using phosphoric acid -sulphuric acid as the Electrolyte with ethylene glycol as addition agent, Trans. Inst. Metal Fin. Assoc. India, 32, (1994). 15-18 9. S.Mohan, and R.Venkatachalam and S.John," Chemically coloured stainless steel for Photo thermal conversion of solar energy", Bull. Electrochem., 9, (1993) 473-475 10. S.Vincent, M.Pandiammal, S.Mohan and R.Venkatachalam,"A Microprocessor based pulse unit for the anodic treatment of stainless steel",Bull. Electrochem., 9, (1993) 476-478 11.S.Mohan and R.Venkatachalam "Teflon coating on Aluminium", Trans. Inst. Metal Fin. Assoc. India. 4(2) (1995) 135-136 12. N.Mani, S.Mohan, N.G.Renganathan and R.Srinivasan,"Non-stoichiometric Cu3.8-Ni Thin films", Mater. Sci. Lett., 15 (1996) 1048-1050 13. S.Mohan, S.Pitchumani, K.L.N. Phani and C.Vincent, Pulse Electrosynthesis of PolyAniline", Proc. Macromolecules, IUPAC Macro-98, Allied Publishers. Vol 1 (1998) 328-331. 14. D.Kanagaraj, S.Mohan, N.G.Renganathan, R.Venkataramanan and S.Venkatakrishna Iyar, " Evaluation of Anodised Aluminium Surface obtained from Sulphamic acid bath using Electrochemical impedance spectroscopy, Plat. Surf. Fin., July, (1999) 58-61 15. S.Mohan and R.Venkatachalam,"Brush Plating- Present State of Art" Electrochem., 14 (12) (1998) 472-475 Bull. 16. S.Mohan and R.Venkatachalam,"A New bath for Electropolishing of Stainless steel. Trans. Inst. Metal Fin. Assoc. India 7(3) (1998) 221-224 17. S.Mohan, G. Jayashree, T. Vasudevan . " Electropolishing of Stainless Steel” Bull. Electrochem., 16(9), (2000)388-391. 18.S.Mohan, G.Jayashree, T.Vasudevan, "Corrosion Resistant Electropolished Stainless Steel " Bull. Electrochem. 18, (2002) 97 19. S.Mohan, R.Venkatachalam and Srividya; and without “Pulse plating of Nickel with additives “Bull. Electrochem., 15, (1999) 257. 20. S.Mohan and M. Jayachandran ‘’ Studies on the brush Plated Sns Thin films‘’ J. Mater. Sci. Lett., 20, (2000) 381- 383 21. S.Mohan and S.Shriram “Electrodepostion of Nano crystalline Nickel – a brief review . Trans. Inst. Metal. Finish (UK) 78(5), (2000)194 22. D.Kanagaraj, S.Mohan, N.G.Ranganathan, V.Raj, R.Venkataramanan. Evalution of Aluminium surface Subjected to various surface teratments using electrochemical impedance spectroscopy ‘’ Bull. Electrochem. 15(3-4), (1999) 164-169 23. S.Mohan, C.Rajeshwari and N.G. Renganathan; "Quantification of additives in Nickel watt's bath by Cyclic voltammetric stripping technique” Trans. Inst. Metal Fin., U.K 79(2), (2001) 73-76. 24. S.Mohan, D.Kanagaraj, R.Sindhuja, S.Vijayalakshmi and N.G.Renganathan Electropolishing of stainless steel –A Review Trans.Inst.Metal.Finish, 79, (2001)140 25. K.S.Ranga Krishnan, K.Srinivasan and S.Mohan, Electrodeposition of compositionally modulated alloys –A review 26. S.Mohan, S.Shriram Trans.Inst.Metal.Finish. 80, (2002) 46 “Electrodepostion of Nanocrystalline Nickel- A review, Trans . Inst. Metal Finish, 78(5), (2000) 194 27.S.Mohan, S.Shriram and S.Karthikeyan “Electrodeposition of nanocrystalline Nickel” Bull. Electrochem., 18 (6), (2002) 241 28. A.Subramanian, S.Mohan and T.Vasudevan “ Corrosion resistance of electropolished stainless steel” Bull. Electrochem., 18 (3) , (2002) 97 29. S.Mohan N.G. Ranganathan, M. Kamal Kumar, D.Kanagaraj “Evaluation of corrosion resistance behaviour of different sealing agents on anodized aluminium alloys by electrochemical impedance Spectroscopy” Proc. Electrochem, 4 (2000) 305 30. S.Mohan, D. Kanagaraj and V.Raj ‘’Effect of Sealing agents on the Corrosion behaviour of Sulphamic acid anodized Aluminia films “ Trans.inst.metal.finish . U.K. 81 (3), (2003) 83 31. S.Mohan , S.Raman , B. Ganesh Kesari and H.Latha Corrosion Studies on pulsed and direct Current Chromium Deposits’ (2003) 1 Trans.inst.metal.finish. , 81 32. S.Mohan and V.Raj A comparative Study of DC and Pulse Gold electrodeposits Trans.inst.metal.finish 83(2) (2005) 72 33. and S.Mohan V.RAJ ‘’The effect of additives on the Pulsed electrodeposition of Copper”, Trans.inst.metal.finish, 83(4), (2005) 194 33. Sobha Jayakrishnan, S.Mohan and M.Jayachandran B.Subramanian, C.Sanjeeviraja Characterization of Brush plated Sn and SnSe, Indian Surface Engineering, 2(1) (2005) 6468 34. S.Mohan and Sobha Jayakrishnan B.Subramanian. Structural, Microstructural and Corrosion Properties of Brush Plated Copper-Tin Alloy Coatings , Surface and coatings technology 201(2006)1145 35. Raj, and S.Mohan Efect of -picoline and Quinoline on DC and Pulse plating of Nickel directly on aluminium Trans. Inst. of Metal finishing 85(3), (2007) 36. C. Basavaraja, V.B. Kulkarani, S.Mohan, Y.M. Iyer& G.V. Subbarao Experimental Studies on BZ reaction system containing Oxalic acid and acetone as mixed organic Substrate in a CSTR. Indian Journal of Chemistry 43A , April (2004) 739. 37. C. Basavaraja, V.B. Kulkarani, S.Mohan, Y.M. Iyer& G.V. Subbarao, Simulation of the effect of Oxalic acid and acetone on the bistable behaviour of the minimal bromate Oscillator in a CSTR. Indian Journal of Chemistry 44A , Oct (2005) 1984. 38. B.Subramanian, S.Mohan and Sobha Jayakrishnan Structural and electrochemical characterization of Ni nanostructure films on steels with brush plating and sputter deposition, Current Applied Physics (2006) 39. B.Subramanian, S.Mohan and Sobha Jayakrishnan, Selective area deposition of Tin-Nickel alloy coating-an alternative for decorative chromium plating, J. Applied. Electrochem, 37(2), (2007) 219 40. S.Mohan N.Dhanikaivelu and R. Rama Prabha, Pulsed electrodeposition of cobalt and nickel alloy, Tran.Inst. Metal Finishing 85 (5) (2007) 274. 41. G. Saravanan, S.Mohan, R. M. Gnanamuthu and J. Vijayakumar Effect of AlCl3, CH3SO3H on thickness, current efficiency and corrosion properties of brush plated Cr(III) formate urea baths, Surface engineering 24(6) (2008) 458- 463 42. S.Mohan, G. Saravanan and N. G. Renganathan Comparison of chromium coatings and electrochemical behaviour with direct current and pulse current deposition in trivalent chromium formate urea bath as alternative to conventional Cr coatings, accepted Surface Engineering 2008 43. A. Balasubramanian, D. S. Srikumar, G. Raja, G. Saravanan and S.Mohan, Effect of pulse parameter on pulsed electrodeposition of copper on stainless steel Surface Engineering 25( 5) (2009)389 44. C.Shanti, S. Bharathan, Rajasrien Jaiswal , R.M. Arunachalam and S.Mohan The Effect Of Pulse parameters in Electrodeposition of Letters 62 (2008) 4519–4521 Silver alloy, Materials 45 S.Mohan and N. Rajasekaran, Pulse electrodeposition of tin from sulphate bath, Surface Engineering 25 (2009) 634. 46.. G. Saravanan, S. Mohan Corrosion behavior of Cr electrodeposited from Cr(VI) and Cr(III)-baths using direct (DCD) and pulse electrodeposition (PED) techniques’’ Corrosion Science 51 (2009) 197–202. 47. G.Saravanan and S.Mohan Pulsed electrodeposition of microcrystalline Chromium from trivalent Cr-DMF bath, J.Applied electrochemistry. 39(2009) 13931397. 48. G. Saravanan and S.Mohan Sructure , Current efficiency and corrosion properties of brush electrodeposited ( BED) Cr frm Cr(III)-Dimethyl formamide ( DMF) -bath’’, J. Applied Electrochemistry 40(2010) 1-6. 49. N. Rajasekaran and S.Mohan Structure, microstructure and corrosion properties of brush plated Cu-Ni alloy, Journal of Applied Electrochemistry 39 (2009) 1911-1916. 50. J. Vijayakumar and S.Mohan Comparative study of microstructure and corrosion properties in 3.5% NaCl solution of the electrodeposited Nickel obtained from various baths’’, : Surface Engineering, Volume 27, Number 1, February 2011 , pp. 32-36(5) 51. N. Rajasekaran and S.Mohan ‘’Preparation, corrosion and structural properties of Cu-Ni multilayer from sulphate/citrate bath’’ Corrosion science 51(2009) 21392143. 52. S.Mohan, J. Vijayakumar and G. Saravanan Influence of CH3SO3H and AlCl3 in the direct and pulse current electrodeposition of trivalent chromium , , Surface Engineering 25 (8) (2009) 570. 52. S.Mohan, V. Ravindran, B. Subramanian, G. Saravanan. “Electrodeposition of zinc–nickel alloy by pulse plating using non-cyanide bath”, Trans. IMF. 87(2) 2009 85-89 53. M. Ilayaraja, S. Mohan, R.M. Gnanamuthu, G. Saravanan. “Nanocrystalline zincnickel alloy deposition using pulse electrodeposition (PED) technique. Trans. IMF. 87 (3) 2009 145-148 54. S.Mohan and N.Rajasekaran Influence of electrolyte pH on composition, corrosion properties and surface morphology of electrodeposited Cu-Ni alloy, Surface engineering 27 (7) 2011 519-523 55. N.Rajasekaran and S.Mohan Effect of bath temperature on corrosion, structure and microstructure of electrodeposited Cu-Ni alloy Trans.IMF 89 (2) 2011 83-88 56. J.Vijayakumar, S.Mohan and S.Sunil Yadav “” Effect of Dicarboxylic acid on microstructuren and mechanical properties of sub-microcrystalline Ni-Co alloys J.Alloys and compounds 509 2011 9692-9695 57. N.Rajasekaran and S.Mohan Giant magnetoresistance in electrodeposited films – current status and the influence of parameters Critical Reviews in Solid State and Materials Sciences, 37:3, 158-180 2012 58.Gengan Saravanan, and S. Mohan, “Electrodeposition of Fe-Ni-Cr alloy from Deep Eutectic System containing Choline chloride and Ethylene Glycol”. Int. J. Electrochem.Sci. 6(2011) 1468 59 S. Mohan, Gengan Saravanan, and N.G. Renganathan, “Comparison of chromium coatings and electrochemical behavior with direct and pulse current deposition in trivalent chromium formate urea bath as alternative to conventional Cr coating”. Surf. Eng. 27(10) (2011)775 60. RM. Gnanamuthu,S. Mohan,G. Saravanan and Chang Woo Lee, “Comparative study on structure, corrosion and hardness of Zn-Ni alloy deposition on AISI 347 steel aircraft material”. J.Alloys and Compd. 513 (2012) 44 61. N. Rajasekaran and S. Mohan’” A Comparative Study of Cu-Co Alloys versus Cu/Co Multilayered Coatings Obtained by Electrodeposition J. Electrochem. Soc. 2012, Volume 159, Issue 10, Pages D577-D581. 62.. J. Vijayakumar and S. Mohan*,’’ Effect of benzyl alcohol and thiourea onelectrodeposition of cadmium:electrochemical impedance spectroscopystudy’’ , Transactions of the Institute of Metal Finishing 2013 VOL 91 NO 3 165 63.R.M. Gnanamuthu a, S.Mohan b, ChangWooLee a, Development of high energy capacities of nanoscaled Sn–Cu alloy thin film electrode materials for Li-ion batteries, Materials Letters , 84 (2012) 101–103. 64. J. Vijayakumar, S. Mohan and J. Maharaja’’Effect of magnetic field on current efficiency and crystal orientation of NiCo alloy using pulse electrodeposition technique’’ Journal for Electrochemistry and Plating Technology . May 2013. 65. PATENTS: 1. S.Mohan, R.Venkatachalam and S.John A process for the colouring of stainless steel useful for the manufacture of utensils for solar cookers''. Patent application No. 804/del/92. 2. S.Mohan, N.G.Renganathan and Y. Mahadeva Aiyar A device for producing electrical power. Patent application No.57/del/ 95. 3. B. Subramanian, M.Jayachandran, P. Kuppuswami and S.Mohan A process for the preparation of Brush plated TIN Sulpho selenide semiconductor thin film electrode useful for photoelectrochemical ( PEC) Cells. Patent application No. 0144NF2006/IN Papers published in seminars/ Conferances 1. S.Mohan, R.Venkatachalam, R. Srinivasan and N.G. Ranganathan; ‘ Micro Processor Based Room Temperature Colouration of Stainless Steel’ : presented in IMF Cong ‘97 Held at Bombay Jan 21-23 1997 2.S.Mohan, R.Venkatachalam ; A New type of Bath for Electropolishing of Stainless Steel ‘: presented in IMF Cong ‘97 Held at Bombay Jan 21-23 1997. 3. S.Mohan, R.Venkatachalam ; Selective ( Brush ) Plating – A Review presented in IMF Cong ‘97 Held at Bombay Jan 21-231997. 4. D.Kanagaraj, S.Mohan, N.G. Ranganathan, V.Raj, R. venkataramanan and S.V. K. Aiyar ; Evaluation of anodised Aluminium surface Obtained from sulphamic acid Using Electrochemical impedance Spectroscopy. Presented in 6th international Symposium on advances in electrochemical Science and Technology held at chennai during 26-28th November 1998. 5. S.Mohan, R.Venkatachalam and srividya ;’’ Pulse Plating Of Nickel with and with out addtives ‘’ Presented in 6th international Symposium on advances in electrochemical Science and Technology held at chennai during 26-28th November 1998. 6.D.Kanagaraj, S.Mohan, N.G. Ranganathan, V.Raj, R. venkataramanan. ‘’ Evalution of Aluminium surface Subjected to various surface teratments usingelectrochemical impedance spectroscopy. Presented in 6th international Symposium on advances in electrochemical Science and Technology held at 7. D. Kanagaraj, S.Mohan , V.Raj, N.G. Renganathan, J. Shreesudersan and S.Venkatakrishna Iyer ; Effect of Sealing agents on Anodised Aluminium Alloys – An Impedance Study ; Presented in 9 th National conference on corrosion control held at Goa 16-18 Sep 1999. 8. D. Kanagaraj, S.Mohan , V.Raj, N.G. Renganathan, J. Shreesudersan and S.Venkatakrishna Iyer; A Comparative Study of Corrosion Behaviour Of D.C and pulse anodised and sealed aluminium alloy using impedance Spectroscopy ; Presented in 9 th National conference on corrosion control held at Goa 16-18 Sep 1999. 9. S.Mohan, R. Venkatachalam , N.G. Renganathan , J. shreesudarsan and S. Kamakshi ; ‘ Corrosion studies of pulse and Direct Current Chromium Electrodeposit ‘ ; Presented in 9 th National conference on corrosion control held at Goa 16-18 Sep 1999. 10. D. Kanagaraj, S.Mohan , V.Raj, N.G. Renganathan, M. Kamal Kumar S.Venkatakrishna Iyer and ; Evalution of Corrosion resistance Behaviour of Different Sealing agents on anodised Aluminium alloys by Electrochemical impedance Spectroscopy ‘ Presented in 197 th meeting of Electrochemical society held in Toronto May 14 – 19th 2000. 11.S.Mohan , R.Venkatachalam, N.G. Ranganathan, M. Kamal Kumar and J. Shree sudarsan ; Corrosion Studies of Chromium by Direct and pulse Current Deposits; Presented in 197 th meeting of Electrochemical society held in Toronto May 14 – 19th 2000. 12. D.Kanagaraj, S.Mohan, V.Raj, N.G.Renganathan, S.Raman and B.Ganes Kesari Effect of sealing agents on corrosion behaviour of aluminium oxide Films,10th National Convention of Electrochemists, Karaikudi, 13. D.Kanagaraj, S.Mohan and V.Raj Corrosion behaviour of DC and pulse gold deposits formed by direct gold plating on aluminium-An impedance study 10th National Convention of Electrochemists, Karaikudi, April 2001 14. S.Mohan, D.Kanagaraj, V.Raj, S.Vincent, N.G.Renganathan and S.Raman A comparative study of corrosion behaviour of DC and pulse anodized AA2024 alloy 200th Electrochemical Society Meeting, Sanfrancisco, 15. S.Karthikeyan, S.Shriram, S.Pitchumani, S.Mohan, D.Kanagaraj and V.Raj Protective property of conductive polyaniline coating derived from its Dispersion 200th Electrochemical Society Meeting, Sanfrancisco, Sep.2001. 16. R.Sindhuja, S. Vijyalakshmi, S.Mohan and N.G. ranganathan,Effect of additives on the diffusion coefficient of Nickel Electrodepostion. 200th Electrochemical Society Meeting, Sanfrancisco, Sep.2001. 17. C.Rajeshwari, S.Mohan, Influence of additives on the electrodepostion of Copper, 200th Electrochemical Society Meeting, Sanfrancisco, Sep.2001. 18. K.S.Ranga Krishnan, S.Mohan , R.M. Krishnan and D. Kanagaraj, The role of Phosphoric acid in Electropolishing of Stainless Steel, 202nd meeting , electrochemical society, Salt lake City, October 2002. 19. S.Karthikeyan, S.Shriram, S.Pitchumani, S.Mohan, D.Kanagaraj and V.Raj Influence of Poly Aniline blend on the protection of Anodised Aluminium surface 201 st meeting , Electrochemical society, Philadelphia, May 2002 20. B.Subramanian, P.Muthu Kumar, S.Mohan and Sobha Jayakrishnan, Surface characterization of brush plated Copper – Tin alloy National Conference on Application Oriented Nanomaterials during 10 -11 March 2005 held at Alagappa University, Karaikudi . 21. B.Subramanian, R.Kulandai Velu, S.Sanoj Kumar, S.Mohan and Sobha Jayakrishnan, Synthesis of Copper – Tin alloy by Brush Plating for Corrosion Resistance Twelfth National Convention of Electrochemist (NCE – 12) on 18-19 February 2005 held at Thiagarajar College of Engineering, Madurai. 22. B.Subramanian, V.Srikanth, S.Sanoj Kumar, S.Mohan & Sobha Jayakrishnan, Brush Plating of Tin-Nickel and its Characterization Twelfth National Convention of Electrochemist (NCE – 12) on 18-19 February 2005 held at Thiagarajar College of Engineering, Madurai. 24. S.Mohan, V.Raj and M.Balaguru Studies on electropolishing on stainless steel. International Convention on Surface Engineering August 25- 2004 held at ISRO Satellite Centre. Bangalore, India 25. S. Mohan and V. Raj Corrosion behavior of DC and Pulse gold electrodeposits on aluminium alloys International Convention on Surface 27. 2004 held at ISRO Satellite Centre. Bangalore.India Engineering August 25- 26. V.Raj, and S. Mohan Effect of -Picoline and Quinoline on DC and Pulse plating of nickel directly on aluminium International convention surface Engineering August 25-27. 2004 held at ISRO Satellite Centre. Bangalore, India 27. B.Subramanian, C.Sanjeeviraja, Sobha Jayakrishnan, S.Mohan and M.Jayachandran, Photo electrochemical studies on brush plated SnS xSe1-x (x=0, 0.5 and 1) thin film electrodes, International Conference on Electrochemical Power Systems (ICEPS –2) held during 20-21 December 2004 at Hyderabad.