Megalodon Geometry Lesson 1. Assign each student a tooth position 2. Mark three points on the tooth using Sketch Up a. Crown tip b. Crown-root junction on mesial edge c. Crown-root junction on distal edge 3. Connect the points to make a triangle 4. Measure the base of the triangle (that’s your crown width) 5. Measure the other two dimensions of the triangle (that’s your edge lengths) 6. Now draw a line perpendicular from the crown tip to the base of the triangle and measure it (that’s your crown height) 7. Now mark the midpoint of triangle base 8. Draw a line from the crown tip to the midpoint and measure the angle that it forms (that’s your crown angle) 9. Record all measurements in a spreadsheet 10. Challenge: Can you figure out the three angles of the triangle using geometry theorems and the previous measurements? … These might help: basic theorems of geometry