ARKAN
Position
Responsibilities
Years of Experience(s)
Level of Education(s)
Required Skills/
Competencies
Salary for position
Required No.
Production Manager








Manage daily production targets, work allocation, raw material consumption & maintenance
Implement departmental budgets, plans, resource requirements and broad roles
Manage production planning, control, workforce allocation and other routine production activities
Implement budgets and cost structure, including CAPEX, working capital, cash flows requirements
Achieve operational metrics of productivity, cost optimization and capacity utilization
Implement best practices in plant management E.g. Lean Production and Value Engineering
Interact regularly with key customers to understand opportunities and concerns
Supervises all employees in a production environment. Ensure the quality and quantity of cement produced by
the factory.

Participate in the optimization of the production cost of cement

Implement policies and procedures of the department.

Recommends improvements in production methods, equipment, operating procedures and working
conditions.

Follow-up the supplying and storing of raw materials and other material for production.

Balance quality, productivity, cost, safety and moral to achieve positive results in all areas and work
continuously to improve in all areas

Minimum of 5-7 years of experience in same job in cement industries

Bachelor’s degree in Engineering (Chemical, Mechanical, Electrical).





Safety and Quality
Good interpersonal Skills
Able to lead team to accomplish results.
Excellent communication skills.
Proven track record in leadership, planning, supervision and the ability to balance and achieve
positive results in the areas of safety, quality, productivity, cost and employee relations .
AED22,000 to30,000 per month all included (accommodation, transportation, basic, living, etc…) Expat
2
ARKAN
Position
Senior Production Engineer
Responsibilities include but are not limited to :

Responsibilities


















Years of Experience(s)
Level of Education(s)
Required Skills/
Competencies
Salary for position
Required No.



Within the framework of the production instructions given by the Production manager, is in charge of
raw mix preparation, grinding, clinker and cement production, cement storage after milling in
accordance with Quality Assurance procedures and environment regulations.
Coordinate all interventions in case of breakdown.
Take over the direct responsibility for the control of kiln and mill in case of complicated situation.
Guarantee the respect of the planned consumption of the electrical power.
Ensure proper use of the equipment in particular to avoid damage.
Organize and control the work of relevant team members.
Adapt the tasks of the maintenance employees on shifts.
Adapt the sampling and analysis to the shift quality situation taking into account ISO procedures.
Collaborate with Quarry and Process Department.
Monitor the implementation of Safety procedures.
Organise the safety training of his/ her team according to the safety training plan.
Organise or carry out the monthly controls of the equipment in terms of health, work and fire
protection according to safety plan.
Address any identified dangerous situations.
Ensure that the following reports are properly filled out , daily reports, Shift report and computer based
shift report of incident analysis.
Optimize plant running equipment to ensure efficiency and reliability within the min cost possible.
Follow up on the control cards of the composition of raw mix, clinker quality and cement quality
Decide on the use of additives and fuel according to laboratory results.
Supervise the performance of relevant team members (engineers and technicians), coaches and
trains them, and evaluates their performance in accordance with their Job Profiles &KPI’s set.
Control and double check the different materials and products inventory along with carrying monthly
physical stock
Minimum of 5 - 7 years of manufacturing experience in chemical industry with at least 5 years in a
managerial role
Bachelor’s degree in Engineering (Chemical, Mechanical, Electrical).
Proven track record in leadership, planning, supervision and the ability to balance and
achieve positive results in the areas of safety, quality, productivity, cost and employee
relations.
AED 14,300 to 19,400 per month all included (accommodation, transportation, basic, living, etc…) UAE
1
ARKAN
Position
Responsibilities
Years of Experience(s)
Level of Education(s)
Required Skills/
Competencies
Salary for position
Required No.
Production Shift Supervisor
Within the framework of the production instructions given by the Production manager, is in charge of raw mix
preparation, grinding, clinker and cement production, cement storage after milling in accordance with Quality
Assurance procedures and environment regulations.
Coordinate all interventions in case of breakdown.
Supervise the dispatch foreman.
Take over the direct responsibility for the control of kiln and mill in case of complicated situation.
Guarantee the respect of the planned consumption of the electrical power.
Ensure proper use of the equipment in particular to avoid damage.
Organize and control the work of relevant team members.
Adapt the tasks of the maintenance employees on shift to the shift situation.
Adapt the sampling and analysis to the shift quality situation taking into account ISO procedures.
Call the on duty manager in case of need.
Collaborate with Quarry and Process Department.
Monitor the implementation of Safety procedures.
Organize the safety training of his/ her team according to the safety training plan.
Organize or carry out the monthly controls of the equipment in terms of health, work and fire protection according to
safety plan.
Address any identified dangerous situations.
Ensure that the following reports are properly filled out , daily reports, Shift report and computer based shift report of
incident analysis
Follow up on the control cards of the composition of raw mix, clinker quality and cement quality
Decide on the use of additives and fuel according to laboratory results.
Supervise the performance of relevant team members (engineers and technicians), coaches and trains them, and
evaluates their performance in accordance with their Job Profiles & KPI’s set.
Perform any other assignments and tasks related to the business needs of the company, as per company management
direction.
5 to 7 years of working experience, with a minimum of 2 within the Cement Manufacturing industry. Familiar of kiln
10000 ton and vertical cement mill.
BS Degree in general engineering (with chemical and mechanical engineering as main subjects)
In depth of international local Safety regulations and procedures
In depth knowledge of cement production process & related equipment technology
Ability to interact with plant personnel. Good interpersonal skills.
Strong communication skills, both oral and written
Problem solving and decision making skills
Ability to prioritize actions.
Ability to multitask effectively & work under time pressure
Management and Leadership Skills
Ability to use related hardware and software
Problem solving methods and tools (Root Cause Failure Analysis, Risk Analysis,).
Good Command of English and Arabic both verbal and written
AED 11,500 to 15,600 per month all included (accommodation, transportation, basic, living, etc…) Expat
2
ARKAN
Position
Electrical Engineer (Maintenance)








Responsibilities








De bottle necking and perform design calculation to overcome the bottlenecks.
Performs Electrical design, instrumentation application and process analysis.
Analysis of chronic problems related to plant equipment’s, suggest solutions to overcome problems and
implement the recommendations.
Look for improvements, simplification and standardization of electrical maintenance procedures.
Conduct site study, prepare layouts and cost estimate for each project proposal.
Set up work control to ensure proper execution of approved plan and design construction methods, procedures,
specifications, quality, cost and safety.
Participate in preparation of tender documents.
Perform electrical engineering design for 13KV, 6.6 KV and 480 V power distribution system and related
engineering calculations including cable sizing.
Develop hook up and interface diagrams for new equipment’s and instruments.
Budget preparation for capital expenditure projects with justification on investment and budget presentation to
the engineering chief engineer.
Follow up with suppliers and technical interactions with suppliers; arrange site visits, interaction with plant
people.
Analyze spare parts that are failing frequently and take required countermeasures while ordering including
revise technical specification, modify design, insist for better quality
Update technical documents, information, drawings.
Plan various activities for the implementation of the project including preparatory jobs and shutdown jobs.
Coordination and involvement with plant for smooth implementation of projects.
Ensure compliance to all relevant safety, quality and environmental management policies, procedures and
controls across the EPM section to guarantee employees safety, legislative compliance, delivery of high quality
products/services and responsible in environmental attitude.

Years of Experience(s)
Level of Education(s)
Required Skills/
Competencies
Salary for position
Required No.












Minimum of 5 years’ experience in process and project section of cement industry.
Bachelor’s Degree in Electrical Engineering or equivalent qualification
Safety and Quality
Through knowledge of various electrical equipment’s, basic design and operating principles.
Must have ability to reconstruct the contract documents for given project.
Able to carry out technical comparison of proposals.
Ability to analyze the electrical construction drawings layout drawings and to optimize where ever applicable.
Must be able to extract the required help and cooperation from plant people for the smooth completion of
projects.
Should be well aware with latest technical developments, references and case studies.
Ability to conduct technical training courses.
Extensive computer knowledge.
Fluent in English Language.
AED11,533 to15000 per month all included (accommodation, transportation, basic, living, etc…) Expat
2
ARKAN
Position
Responsibilities
Years of Experience(s)
Level of Education(s)
Required Skills/
Competencies
Salary for position
Required No.
Mechanical Engineer
Execute and manage all mechanical maintenance working orders.
Initiate and review internal and external purchasing orders related to mechanical maintenance.
Follow-up the execution of programmed maintenance works, organizes plans and programs for both preventive
maintenance and annual plans for spare parts and follows up the quality and time frame of implementation.
Checks on the tools and equipment to verify the safety of parts, equipment within the department’s scope of
responsibility, raises relevant reports about them to the Mechanical Maintenance Head to fulfill his instructions in this
regards.
Participates in performing breakdown maintenance.
Ensure safe work conditions for mechanical maintenance procedures.
Controls the maintenance works and verify the execution according to standards.
To measure and analyses the efficiency of the maintenance works performed and to submit report to Head of
Maintenance.
To conduct studies to enhance and optimize equipment performance.
To maximize operational availability of all equipment with respect to customer demands.
Coordinates with relevant vendors to ensure timely delivery and quality standards.
Supervise the execution of maintenance projects within the time and cost basis set.
Participate in maintenance budget preparation and ensure budgetary control.
Manages the performance of relevant team members (supervisors and technicians), train them, and evaluates their
performance in accordance with their Job Profiles KPI’s set.
Performs any other assignments and tasks related to the business needs of the business unit.
5-7 years of experience in same job in similar industrial works familiar with kiln 10000 ton and vertical cement mill
Bachelor’s Degree in Mechanical Engineering or equivalent qualification
Safety and Quality
Good interpersonal Skills
Able to lead team to accomplish results.
AED 11,500 to 15,600 per month all included (accommodation, transportation, basic, living, etc…) expat
2
ARKAN
Position
Responsibilities
Years of Experience(s)
Level of Education(s)
Required Skills/
Competencies
Salary for position
Required No.
CCR Operator
Ensure that safety of equipment's & employees, quality & cost related issues are under control. Report immediately
any abnormal situation.
To provide concise shift reports and handovers to ensure continued smooth operation.
Responsibility for ensuring that the operation of the Kiln Raw Milling and Cement Milling systems remains within the
environmental operating limits.
Prepare for operation, start up and shut down cement mills processes, start up and shut down burning and milling
processes, monitor and optimize operations.
Operating the Plant to the process and quality parameters set by the production and quality department and providing
precise and clear log reports for shift handover and day shift departments as set out.
Monitoring KPIs and optimizing the process within the parameters set.
Working in conjunction with the shift laboratory staff to monitor, and maintain process remains within targets.
Informing shift supervisor of and deviations from process or quality targets implementing defined corrective actions.
Assessing any faults through the DCS system contacting shift support teams directly or through shift supervisor
depending criticality and availability.
Attend and actively participate in daily operations meeting to assess the previous 24 hour performance.
Undertake regular training to enhance skills and increase flexibility to operate all areas of the process.
Responsible for ensuring good housekeeping with the working area.
Support the quality department in the collection preparation and testing of samples as and when required within
scope of training given.
Take part in cross functional route cause analysis meetings for plant problems or failures.
Coach and support trainees as and when required.
Provide sickness and absence cover when required and be prepared to work additional hours.
5-7 years of experience in DCS system ABB or Siemens, Cement manufacturing process, Clinker & cement Quality
parameters. Familiar with 10000 Ton clinker.
BSc or Diploma in Chemical Engineering
IT literate
Strong problem solving skills
Ability to work well within a small team.
Excellent communication skills
Good interpersonal skills
Basic safety requirements and all safety procedures
ISO standards 9001,14001 & 18001
AED 7,400 to 10,000 per month all included (accommodation, transportation, basic, living, etc…) Expat
5
ARKAN
Position
Inspector Electrical




Perform troubleshooting and repair of electrical equipment and allied electrical devices that may arise during
the shift and prepare the necessary shift report.
Perform maintenance work on motor, switchgear, transformer, breaker, switches to ensure reliability of
electrical equipment.
Perform repair, servicing or replacement of electrical component for malfunctioning electrical equipment and
devices.
Perform housekeeping after any maintenance work for a safe, clean environment.
Perform checking of LUX and replacement of defective lighting
Assist the instrumentation department in rectifying problem
Prepare Work Request using the Maintenance Package Software
Update the history file of equipment after any accomplished job.
Observe the policy and instructions procedures set by the company
Perform other related job from time to time if assigned to do so.
Minimum of 3-5 years of experience in same job in cement industries

Diploma in Electrical or Trade School Graduate in Electrical


Responsibilities





Years of Experience(s)
Level of Education(s)
Required Skills/
Competencies
Salary for position
Required No.





Safety and Quality
Electrical controls knowledge.
Interpretation of electrical schematic diagram
With basic PLC/Instrumentation knowledge
With knowledge on maintenance of motor, transformer, power circuit breaker, magnetic starter, switches,
generator and other related electrical equipment.

With knowledge on the use of different electrical testing apparatus.

English (written & spoken)

Able to communicate well
AED5,600 to7,600 per month all included (accommodation, transportation, basic, living, etc…) Expat
2
ARKAN
Position
Inspector Mechanical




Responsibilities





Years of Experience(s)
Level of Education(s)
Required Skills/
Competencies

Minimum of 3-5 years of experience in same job in cement industries

Diploma in Electrical or Trade School Graduate in Electrical






Safety and Quality
English (written & spoken)
Able to communicate well




Salary for position
Required No.
Is responsible for carrying out, on time, all the scheduled inspections / maintenance of allotted job,
in consultation with his superiors.
Should take responsibility for self and co workers to strictly adhere to the policies, procedures and
instructions set for the organisation
Is responsible for constantly up-dating his superior on work progress and result of defects observed,
inspection carried out pertaining to his field of operation and should be in a position to locate and
organise spares in the absence of the superior.
Should be able to inspect all spares while being received from the supplier, into our stores, during
the absence of the Foremen.
Has to ensure the safety procedures laid down by the organisation (ensuring the safety of self and
colleagues all the time within the factory premises) and is responsible for housekeeping of areas
related to his field of operation.
Is responsible for maintaining tools and tackles in the right quantity and in good working conditions
and uses them properly.
Should be prepared to work in both general shift and shifts as directed and as per the requirement
of the company.
Should be ready to work additional hours, if a need arises, according to the overtime rules of the
company.
Should be willing to take up any other incidental job allocated to him as and when required by the
organisation.
Specific knowledge of Cement plant machinery.
Basic knowledge of Cement manufacturing process.
Thorough knowledge of general mechanical maintenance activities including fitting, machining,
welding, mill right, rigging etc.
Knowledge of basic safety requirements and all safety procedures at work.
Ability to identify defects and troubleshoot during scheduled inspection and running inspection of
equipment’s.
Ability to read and understand all mechanical drawings.
Identify and locate spares and tools and tackles and also to organise them during the absence of
foremen.
AED5,600 to7,600 per month all included (accommodation, transportation, basic, living, etc…) Expat
2
ARKAN
Position
Responsibilities
Years of Experience(s)
Level of Education(s)
Salary for position
Required No.
Mechanical Technician
Ensure good working conditions and safety standards are maintained within all areas of maintenance operations.
Ensuring the permit to work system and any other safety system (Hot Work, Confined Space, Work at Height, lifting,
slinging and rigging, etc…) are strictly adhered to.
Assess risks, carryout Risk Analysis and plan corrective actions as and when required.
Should take responsibility for self and co- workers to strictly adhere to the policies, procedures and instructions set for
the organization.
Ensure good housekeeping and ensuring that on completion of work the work area is returned in a high standard of
cleanliness and all safety protection has been inspected and returned to the required standard.
Is responsible for carrying out maintenance of all mechanical machinery allocated to him with good quality and
respecting the time schedule.
Is responsible for carrying out, the maintenance to the accuracy and by the method statements produced by the
Inspectors and Planners on time.
Is responsible for constantly up-dating his superior on work progress and result of defects observed, inspection carried
out pertaining to his field of operation and should be in a position to locate and organize spares in the absence of the
superior.
Able to inspect all spares required for a task and inform superior and stores personnel of any defect or damage to
spares or lack of availability.
Is responsible for maintaining tools and tackles in the right quantity and in good working conditions and uses them
properly.
Prepared to work in both general shift and shifts as directed and as per the requirement of the company.
Willing to take up any duties/job allocated to them for which they have the skill, experience or ability to carry out
safely.
Should be able to work with equipment of fabrication in the workshop to produce spares requested by superior.
Responsible for assisting The Execution Engineer in filling and updating the scheduling package.
Undertake all training required to full fill required duties and improve individual skill sets.
Maintain department records as required.
Performs any other assignments and tasks related to the business needs of the business unit or as per management
direction.
7 years of experience in the same field for the vocational training certificate holder and 3years for the mechanical
engineering diploma holder
Certificate or Diploma in Mechanical Engineering
AED 5,600 to 7,600 per month all included (accommodation, transportation, basic, living, etc…)Expat
12
ARKAN
Position
Responsibilities
Years of Experience(s)
Level of Education(s)
Required Skills/
Competencies
Salary for position
Required No.
Plant Operator/Field Operator
Receive report from previous shift
Prepare inspection and follow – up report
Field tour in his specific area to conduct inspection and fell in the check list
Make necessary corrective actions of 1st level maintenance nature
Give and receive feedback from the Operators and Shift Leaders.
Coordinate and facilitate all activities on the lines during daily operation
Prepare equipment before and after restart
Prepare equipment's for maintenance activities during shutdown
Participate in root cause analysis
Participate in refractory work during shutdown
Ensure safety rules and procedures implementation during the shift.
Ensure good level of housekeeping in his area.
Follow – Up all comments mentioned in the report.
3-5 years of experience in similar condition.
High School Graduate , Vocational Training or Equivalent
English language /reading
Communication skills
Team work
Ability to read and write
Ability to use inspection checklist
Root cause analysis knowledge.
Safety oriented
AED 4,300 to 5,800 per month all included (accommodation, transportation, basic, living, etc…) Expat
22
ARKAN
Position
Bulk Loading Operator

Responsibilities
Years of Experience(s)
Level of Education(s)
Required Skills/
Competencies
Salary for position
Required No.










Tends pneumatic conveyor, or belt, auger, or bucket conveyor to load as well as unload bulk onto
tank trucks or railroad tank hopper cars.
Inserts loading nozzle in opening on tank trucks
Starts pump turns lever to open slide on storage bins
Observes weight indicator on scale regulates speed of feed to fill tank in truck
Records weight on sales slip
Tends winch to position railroad tank cars under loading nozzles
Inserts nozzles in loading ports of car turns on pump to feed in
Records weight loaded on manifest
May tend equipment that inserts flexible pipe into railroad tank as well as hopper cars tank trucks
May bag [Packager, Machine any industry ]
May be designated according to vehicle loaded as Cement-Railroad-Car Loader , Cement-Truck
Loader
Minimum of 1-2 years of experience in similar condition.
High School / Intermediate

English language & Arabic basic

Ability to read and write

Safety oriented
AED 4,313 to 5,800 per month all included (accommodation, transportation, basic, living, etc…) Expat
10
ARKAN
Position
Responsibilities
Years of Experience(s)
Level of Education(s)
Required Skills/
Competencies
Salary
Required No.
Lubricator
1. Responsible for the lubrication of all the plant equipment.
2. Detect possible anomalies observed on the equipment while lubrication is being carried out.
3. Monitor the consumption of oils and greases for equipment.
4. Take lubricant samples from time to time for analysis purpose.
5. Follow a lubrication register/sheet for equipment.
6. Responsible for house-keeping and safety of the workshop/premise.
7. Responsible for storage safety of the lubricants in the workshop.
8. Recommend improvements for cost/time reductions.
9. Respond to emergency repair needs.
10. Specify work procedures if required.
11. Ensure safe storage and disposal of used/dirty rags.
12. Ensure good housekeeping in work area.
Performs any other assignments and tasks related to the business needs of the business unit or as per management
direction.

Minimum of 1 – 2 years’ experience in a process industry or a related field.

High School.

Knowledge of lubrication methods.

Knowledge of mechanical equipment.

Knowledge of local Safety rules and regulations
AED1,900 to 2,600 per month all included (accommodation, transportation, basic, living, etc…) Expat
3