2014 ANNUAL MEETING ABSTRACTS
ABSTRACT TITLE
AUTHOR/PRESENTER (by alphabetical order)
Do Disbonds in Adhesively Bonded Joints Matter?
Robert Adams, University of Oxford
Bio-Inspired Catechol-Mediated Self-Healing Wet Adhesion
Kollbe Ahn, University of California, Santa
Barbara
Obtaining Robust Adhesion from Bio-inspired Mushroom like Fibers: A
Geometrical Investigation
Burak Aksak, Texas Tech University
A Bio-Inspired Wet Adhesion Mechanism for Surgical Devices
Ashley Bell, University of Leeds
Chemical Method for Intercoat Adhesion of Exterior Aerospace
Polyurethane Topcoats
Douglas Berry, The Boeing Company
Accelerated Test Methods for Adhesives and Adhesion
Kay Blohowiak, The Boeing Company
Influences of Manufacturing Tolerances on the Crash-Behavior of
Structural Adhesive Bonds
Mathias Bobbert, University of Paderborn
NDT of Thin Film Structural Bonds and Elastic Thick Film Bonds
Stefan Boehm, University Kassel
Frictional Interface Modeling for Gecko inspired Dry Adhesives
Ben Bschaden, University of Alberta
Chemical Patterning of Commercially Pure Titanium Surfaces Based on
Organophosphonates
Miuel Cabrerizo-Vilchez, University of
Granada
Engineered Oligomers for Liquid Optically Clear Adhesives
Chris Campbell, 3M Company
Effect of Post-Cure on Adhesively Bonded Functionally Graded Joints by
Induction Heating
Fracture Toughness Optimization of Nano-Toughened Structural
Adhesives: A Representative Volume Element Approach
Apparatus and Method for Characterization of Bonded Joints Mixed
Mode I+II Fracture
Ricardo Carbas, IDMEC - Polo FEUP
Philip Cardiff, University College Dublin
Filipe Chaves, IDMEC-Polo FEUP
Capillary Adhesion at Nanometer Scales
Shengfeng Cheng, Virginia Tech
Understanding PSA Debonding with Molecular Simulations
Zhong Chen, 3M Company
Switchable Wettability on External Stimuli-Responsive Smart Surfaces
Kilwon Cho, Pohang University of Science
and Technology
Combined Numerical and Experimental Investigation of Mode-Mixity in
Beam Like Geometries
Mark Conroy, University College Dublin
Toughening Solutions for High-Performance Epoxy Adhesives
Bryan Danek, Croda
Characterizing Interfacial Mussel Adhesive Protein Mfp-5 with the
Surfaces Forces Apparatus
Eric Danner, UCSB
Contact Formation and Separation Mechanisms at Short Contact Times
Chelsea Davis, ESPCI ParisTech
Using Cohesive Elements and XFEM to Study Crack Path Selection in the
Presence of Locally Weakened Interfaces in DCB Specimens
Comparative Performance Evaluation of Typical Structural Epoxy and
Methacrylate Adhesives at Different Loading Conditions
Reworkable, Optically Clear Adhesive for Display Assembly
Experimental Measurement of Forces and Energies Associated with
Capillary Rise in a Vertical Tube
Which Controls Wetting? Contact Line versus Interfacial Area: Simple
Experiments on Capillary Rise
Puncture Mechanics of Soft Materials
Smart, Thermo Switchable, Water Absorbing Pressure Sensitive Adhesive,
Reversibly Detaching Under Temperature Elevation
Structure-Property Relationships in Polyethylene Fusion Bonds
David Dillard, Virginia Tech
Mojtaba Eskandarian, National Research
Council Canada
Albert Everaerts, 3M Company
Chuck Extrand, Entegris
Chuck Extrand, Entegris
Sami Fakhouri, University of Massachusetts
Polymer Science and Engineering
Mikhail Feldstein, A.N. Nesmeyanov
Institute of Organoelement Compounds
Aaron Forster, National Institute of
Standards and Technology
Dynamic of Flooded Adhesion in the Presence of Draining Channels
Joelle Frechette, Johns Hopkins University
Ovalbumin as a Wood Adhesive
Charles Frihart, Forest Products Laboratory
Many Roles of Wood Adhesives
Charles Frihart, Forest Products Laboratory
Influence of Shrink-induced Stress on the Mechanical Properties of
Adhesively Bonded Joints
Paul Ludwig Geiss, University of
Kaiserslautern
The Debonding of Nanoparticles in Toughened Adhesives
Felicity Guild, Imperial College London
Novel Material Using an Air Bubble for Underwater Adhesion Inspired by
the Leaf Beetle
Polymethylsilsesquioxane Film Showing Thermally Stable, Durable and
Responsive Oleophobicity
Naoe Hosoda, National Institute for
Materials Science
Micro-Deformation in the Fracture of a Toughened Epoxy
Rolling Wrinkles on Elastic Substrates
Surface Stress of Soft Solids
Switchable Pressure Sensitive Adhesives Based on Salt Polyelectrolyte
Complexes
Surface Modification of Chemically Stable Polymeric Materials that
Enables Their Solvent Bonding and Inkjet Printing using Water-based Ink
Preventing Bacterial Fouling through Controlled Curvature Surfaces
Manufacture of Mushroom Shaped Dry Adhesives by ThermoCompression Molding of Thermoplastic Elastomers
Advanced Applications on Dual Curable Pressure Sensitive Adhesives in
3D Multi-chip Package Process
Atsushi Hozumi, AIST
Don Hunston, National Institute of
Standards and Technology
Michael Imburgia, University of
Massachusetts - Amherst
Anand Jagota, Lehigh University
Chainika Jangu, Virginia Tech
Hitoshi Kanazawa, Fukushima University
Mehdi Kargar, Virginia Tech
Walid Khaled, University of Alberta
Hyun-Joong Kim, Seoul National University
The Application of Fracture Mechanics to the Peeling of Adhesive Joints
Tony Kinloch, Imperial College London
Qualification of a Novel Polyurethane Adhesive for Structural Bonds in
Wind Turbines
Felix Kleiner, Henkel AG & Co. KGaA
Adhesively Bonded Wood-Based Multi-Material Systems as a Sustainable
Material for Technical Appliances
Daniel Kohl, Institute of Cutting and Joining
Manufacturing Processes, University of
Kassel
Role of Residual Stress on the Strength of Adhesive Joints
Jamie Kropka, Sandia National Laboratories
Impact of Precursor Size on the Chain Structure and Mechanical
Properties of Solvent-Swollen Epoxy Gels
Kevin Masser, U.S. Army Research
Laboratory
Kevin Masser, U.S. Army Research
Laboratory
Ballistic Response in Amine Cured Epoxy Resins
Characterizing Large Area Hydrophilic Interactions between Silicon
Surfaces
Traction-Separation Relations for Large Area Graphene Transferred to
Silicon
Traction-Separation Relations for Silicon-Epoxy Interfaces from Infrared
Crack Opening Interferometry and Digital Image Correlation
Investigation of Shear Strength Properties of Fusion Bonded Lap-Shear
Joints Under the Influence of Surface Contaminations from Deep Drawing
Oils
Nanoscale Phase Separated Block Copolymers as Multifunctional
Adhesives
Kenneth Liechti, University of Texas Austin
Kenneth Liechti, University of Texas Austin
Kenneth Liechti, University of Texas Austin
Kristian Lippky, Technische Universität
Braunschweig
Tim Long, Virginia Tech
3D Printed Polymeric Networks for Tissue Scaffolding and Cell Adhesion
Tim Long, Virginia Tech
Channel Cracks in Composite Thin Film Coatings with Alternating Stiff and
Soft Layers
Rong Long, University of Alberta
Reversible Adhesion of Hydrogel in Aqueous Media
Jennifer Macron, Soft Matter Sciences and
Engineering Laboratory, ESPCI Paristech
Thermoanalytical characterization of cold-curing polyurethane adhesives
Sebastian Mailander, University Paderborn
Use of Low Pressure RF Argon-Oxygen Mixtures Plasmas for Surface
Modification of Polydimethyl Siloxane (PDMS) to Improve Adhesion and
Delay Hydrophobic Recovery
Comparative Surface Modifications and Adhesion of Wood Plastic
Composites with Different Polyethylene Content Treated with Low
Pressure Plasma
Compatibility and Viscoelastic Properties of N-Butyl Acrylate-Ethylene
Copolymer Hot Melts Containing Tackifiers of Different Nature
Using Contact Line Dependent Wetting
Jose Miguel Martin-Martinez, University of
Alicante
Andres Yanez-Pacios, Adhesion and
Adhesives Laboratory
Jose Miguel Martin Martinez, Adhesion and
Adhesives Laboratory of the University of
Alicante
Thomas McCarthy, University of
Massachusetts
Pollen: A Natural Pressure-Sensitive, Surface-Tunable Adhesive System
Carson Meredith, Georgia Tech
Modeling the Interfacial Peeling of a Pressure Sensitive Adhesive Film
Idris Mohammed, Imperial College London
Role of Hydrogen Bonding in Nanostructuring and Mechanics of PVP-PEG
Adhesive from Theoretical Point of View
Alexander Moscalets, A.N.Nesmeyanov
Institute of Organoelement Compounds of
Russian Academy of Sciences
Numerical Simulation of Confinement Induced Instability of Elastomeric
Layer Debonding Using a Cohesive Zone Model Approach
Bikramjit Mukherjee, Virginia Tech
Temperature Controlled Debonding of Epoxy Based Adhesives
Malte Mund, Technische Universität
Braunschweig
Daiki Murakami, Japan Science and
Technology Agency (JST), ERATO
Wetting Transition from Cassie-Baxter to Wenzel States on Textured
Surfaces
Fatigue Performance of Adhesively Bonded Spars of Wind Turbine Rotor
Christof Nagel, Fraunhofer IFAM
Blades
Effects of the Bond Line Thickness on the Fracture Mechanical Behavior of
Markus Brede, Fraunhofer-IFAM
Structural Adhesive Joints
High Gas Barrier Adhesives as Encapsulation for Flexible OLED
Kenta Nishijima, LINTEC Corporation, Japan
Preparation & Evaluation of Hybrid Curable Pressure Sensitive Adhesive
Ji-Won Park, Seoul National University
Fracture Behavior of Silica Nanoparticle Filled Epoxies: The Influence of
Particle-Matrix Adhesion
Raymond Pearson, Lehigh University
Biomimetic Directional Switchable Adhesive Inspired by the Gecko
Noshir Pesika, Tulane University
The Dynamic Adhesion Problem and Its Application to Structured
Adhesives
Jonathan Puthoff, Lewis & Clark College
Binding Properties of Magnesium Potassium Phosphate Cement
Chunxiang Qian, Southeast University
An Investigation of Toughness Mechanisms and Synergistic Effects in
Nano-Toughened Epoxy Adhesives
Evaluating Adhesion Interactions of Model Surfaces in an Aqueous
Environment using Contact Mechanics
Studying the Interaction of a Propagating Crack with Locally Weakened
Interfaces in an Adhesive Joint
A Simple Mode-Mixity Dependent Cohesive Zone Model with Application
to Illustrative Interfacial Fracture Problems
Properties of Acrylic Pressure Sensitive Adhesives Combining Classical and
Mussel-Inspired Mechanisms of Adhesion
Dong Quan, University College Dublin
Nassim Rahmani, Kansas State University
Shantanu Ranade, Virginia Tech
Earl Reedy & John Emery, Sandia National
Laboratories
Ilya Rodionov, A.N. Nesmeyanov Institute of
Organoelement Compounds
Thomas Scherer, University of
Experimental Investigation and Simulation of the Stress-Strain Behavior of
Kaiserslautern – Workgroup Materials and
Elastic Adhesive Joints
Surface Technologies (AWOK)
Gregory Schueneman, Forest Products
Surface Modified Nanocellulose for Epoxy Composites
Laboratory, US Forest Service
Adhesion in Attachment and Detachment of Inclined Elastic Beam
Yu Sekiguchi, Tokyo Institute of Technology
Contact Mechanics of Structured Adhesives
Ishan Sharma, IIT Kanpur
Particle Rolling on a Fibrillar Adhesive Interface
Metin Sitti, Carnegie Mellon University
High Modulus, Fast Setting Silane Cure Reactive Hot Melt Adhesives
Wu Suen, Henkel Corporation
Wettability and Antifouling Behavior on the Surface of Super Hydrophilic
Polyelectrolyte Brushes
Surface Analysis of Polyacrylate and Hydroxy Terpene Phenol Tackifier
Blends
Atsushi Takahara, Kyushu University
Akio Takemura, The University of Tokyo
Capillary Adhesion and Instability of a Micro-Double Cantilever Beam
Tian Tang, University of Alberta
Lipid Modified Polyethylenimine Mediated siRNA Aggregation Studied by
Molecular Dynamics
Tian Tang, University of Alberta
Mechanics of Adhesion of a Soft Particle Due to Electrostatic Interaction
Tian Tang, University of Alberta
Mechanical Properties and Toughening Mechanisms of Epoxy Modified
with Polysiloxane-based Core-Shell Particles
Technology for the Production of Stator and Rotor Packets for Electric
Motors by Adhesive Bonding
Ambrose Taylor, Imperial College London
Holger Thiede, University of Kassel
Characterization of PDMS Adhesion Using the Blister Contact Test
Kevin Turner, University of Pennsylvania
Adhesion Mechanics of a Convex Shell on a Planar Substrate
Kai-tak Wan, Northeastern University
Model for Attachment-Detachment Mechanics of E. coli Bacteria
Kai-tak Wan, Northeastern University
Role of Salt on Adhesion of an Epoxy/Aluminum (Oxide) Interface in
Aqueous Environments
Novel Epoxy Particulate Composites for Mitigation of Insect Residue
Adhesion on Future Aircraft Surfaces
Chris White, National Institute of Standards
and Technology
Christopher Wohl, NASA Langley Research
Center
Adhesion of Electrospun Polymer Blends
Shing-Chung Wong, University of Akron
Quantifying the Mechanical Properties of Artists’ Paints with
Nanoindentation
Madeleine Wright, Northwestern University
Novel Liquid Crystalline Epoxy Resin with Low Clearing Temperature
Hisanao Yamamoto, Asahi-Kasei Ematerials Co., Ltd.
Influence of Organic-fillers in Phenol-formaldehyde Wood Adhesion
Xing Yang, Virginia Tech
High Frequency Viscoelastic Characterization of Thermally Aged Silicone
Rubbers using Quartz Crystal Resonators
Chyi-Huey Yeh, Northwestern University
2014 PEEBLES AWARD ABSTRACTS
ABSTRACT TITLE
A Blister Test for Interfacial Adhesion of Large-Scale Transferred
Graphene
The Microstructure and Fracture Performance of Hybrid Silica
Nanoparticle/Block Copolymer-Modified Epoxy Polymers
Designing High Strength, Reversible Adhesives for "Real World" Surfaces
Effect of Asymmetry on Adhesion and Locomotion of Soft Bodied Objects
Interfacial Binding Energy of Covalently Functionalized Single-Walled
Carbon Nanotubes with Amorphous High Density Polyethylene
The Effect of Surface Wettability and Wetting on the Gecko Adhesive
System
Nucleobase-Functionalized Acrylic Block Copolymers for Supramolecular
Thermoplastic Elastomers
AUTHOR/PRESENTER (by alphabetical order)
Zhiyi Cao, The University of Texas Austin
Huang Ming Chong, Imperial College
London
Daniel King, University of Massachusetts
Amherst
Subrata Mondal, IIT Kanpur
Priyal Shah, Virginia Tech
Alyssa Stark, The University of Akron
Keren Zhang, Virginia Tech
POSTER SESSION ABSTRACTS
ABSTRACT TITLE
Particle Rolling on a Fibrillar Interface
Contact Angle Hysteresis of Commercially Pure Titanium Surfaces
Functionalized with Organophosphonates
Functionally Graded Adhesive Patch Repairs in Civil Applications
On the Use of Self-Assembling Block Copolymers to Toughen A Model
Epoxy
Bio-inspired Histamine-Containing Elastomers
The Effect of Graphene Nanoplatelets on the Fracture Toughness of
Epoxy Polymers
Synthesis and Properties of Waterborne Polyurethane Using Asymmetric
Polyol
Enzymatic Degradation of Lichenan Layers Adsorbed onto Regenerated
Cellulose Surfaces
Addition of Polypropylene Waxes to EVA Hot Melt Adhesives
Surfaces that Shed Dust: Unraveling the Mechanisms
Improvement in the Adhesive Property of Polyorefins, Silicone Resin,
Fluorocarbon Resin and FRP
Block Copolymer Modified Epoxies: The Effect of Resin Chemistry on
Morphology
Evaluation of Surface Viscoelastic Properties for Pressure Sensitive
Adhesives Using Force Measurement of Atomic Force Microscope
Using Contact Angle and Contact Angle Hysteresis to Control Capillary
Forces
Study on Grafting Modification of Polyolefin used as Adhesives
Adhesion Properties between Pressure Sensitive Adhesive (PSA) and
Backing Film for Flame Retardants Tapes
Bonding Performances by Surface Treatment Using Bio-inspired Adhesion
Promoting Agents
AUTHOR/PRESENTER (by alphabetical order)
Uyiosa Abusomwan, Carnegie Mellon
University
Miuel Cabrerizo-Vilchez, University of
Granada
Ricardo Carbas, IDMEC - Polo FEUP
Yilin Chen, Lehigh University
William Chiang, Macromolecules and
Interfaces Institute
Huang Ming Chong, Imperial College
London
Jae-Hwan Chun, Korea Institute of
Footwear & Leather Technology (KIFLT)
Travis DePriest, Virginia Tech
Jose Miguel Martin-Martinez
Jenny Genevieve Devaud, Ball Aerospace
and Technology Corp.
Hitoshi Kanazawa, Fukushima University
Amelia Labak, Lehigh University
Nobuaki Maruoka, Nitto Denko Corporation
Thomas McCarthy, University of
Massachusetts
Xuyang Wang, Tianjin Shengwang Chemical
Co., Ltd
Young-Soo Na, Segye Chemical Industry Co.
Ltd
Dan Yu, Singapore Institute of
Manufacturing Technology