A&E Specifications
IS-IP290
IS-IP290 InSight™ IP 2.0 Megapixel Fixed Bullet with 18x Optical
Zoom
Bid-Spec
1.0 Description
The IS-IP290 camera is a Quad-streaming, H.264 & MJPEG encoding, 2.0 Megapixel resolution, IPaddressable network camera. It is designed to deliver full-motion, high-definition, progressive scan digital
video across local area networks. The IS-IP290 features a design with no moving parts, with Power over
Ethernet, 18x Optical Zoom, a 1/2.8” CMOS sensor, and Audio-In/Audio-Out. The IS-IP290 is a highlevel, cost effective, megapixel network camera that provides the ability to observe closer without noise
and degradation.
2.0 Bid Specification




















The camera shall utilize one high-sensitivity 2.0 Megapixel CMOS sensor with a 1/2.8” optical format.
The camera shall support MJPEG or H.264 encoding format.
The camera shall output at a maximum resolution of 1920(H) x 1080(V) pixels per sensor.
The camera’s frame rate shall be 30 frames per second at the maximum resolution of 1920(H) x
1080(V).
This camera shall feature a tampering alarm.
The camera shall feature streaming of the full field of view (FOV) and multiple regions of interest (ROI)
for forensic zooming.
The camera shall utilize a Vari-focal/Motorized 18x Optical Zoom lens of 4.7–84.6 mm.
The camera shall be equipped with a 100 Mbps LAN connector.
The camera shall support a minimum IPv4/v6, UDP, ICMP, SMTP, PPPoE, UPnP, IGMP, SNMP, QoS,
TCP/IP, HTTP(S), FTP, RTP/RTSP, and DHCP network protocols.
The camera shall feature automatic exposure, automatic multi-matrix white balance, shutter speed
control, programmable brightness, saturation, gamma and sharpness.
The camera shall incorporate necessary algorithms and circuits to detect motion in low light with
clarity.
Minimum light requirement to produce a color image shall be approximately 0.2 lux (color) with an
F/1.6 lens and frame rate of 30 fps, and 0.02 lux (B&W) with an F/1.6 lens and frame rate of 30 fps.
This camera shall have a power consumption of 6W.
The camera’s primary power source shall be Power over Ethernet (PoE) complying with the IEEE
802.3af standard.
The camera shall have the alternative option to be powered from a 12V DC power source, or 24V AC
power source providing at least 6W.
This camera shall feature a durable aluminum housing that minimizes fire hazards.
The camera should be mounted directly to a wall or ceiling.
The camera’s operating ambient temperature is 0°C (32°F) to 40°C (104°F).
The camera shall feature an auto recovery mechanism called Embedded Watchdog that will recover
the camera if it is acting abnormally.
The camera will have a factory burned in MAC (Media Access Control) address ranging from
00:50:C2:A9:80:00 thru A9:8F:FF, 40:D8:55:0E:C0:00 thru 0E:CF:FF, or 0C:EF:AF:40:00:00 thru
4F:FF:FF that is registered and owned by Sentry360 through IEEE Registration Authority.
Page 1
23807 W Andrew Rd, Suite B | Plainfield, IL 60585 | (800) 261-2707 | www.sentry360.com
A&E Specifications
IS-IP290
IS-IP290 InSight™ IP 2.0 Megapixel Fixed Bullet with 18x Optical
Zoom
Maximum frame rates for typical resolutions (clipped mode) are given below:
Resolution
Frame Rate
1920 x 1080
1920 x 1080
1280 x 1024
1280 x 720
1024 x 768
800 x 600
720 x 480
640 x 480
320 x 240
30 (Low Latency)
30
30
30
30
30
30
30
30
Quick-Spec
3.0 Minimum Performance Specification
The IS-IP290 megapixel camera will meet the following operating requirements:
Operational
Imaging
Active Pixel Count
Dynamic range
Auto Recovery
One 2.0 megapixel CMOS image sensor 1/2.8” optical format
1920(H) x 1080(V) pixel array per sensor
95 dB
Embedded watchdog
Image
Format
Compression
JPEG still images and Motion-JPEG video or H.264
High speed hardware-based image compression
Full Field of View (FOV) Resolutions
1920(H) x 1080(V) 2.0 megapixel
Data Transmission
Data Rate MJPEG
Data Rate H.264
Video Frame Rate
Max Frame Rate
18.2 Mbps @ 1920 x 1080
4.2 Mbps @ 1920 x 1080
30 fps @ 1920 x 1080
30 fps @ 1920 x 1080
Environmental
Operating Temperature
Storage Temperature
Humidity
Protection Level
0 to 40 Degrees Celsius
-40 to 70 Degrees Celsius
10-90% relative, non-condensing
IP66 (with optional housing)
Page 2
23807 W Andrew Rd, Suite B | Plainfield, IL 60585 | (800) 261-2707 | www.sentry360.com
A&E Specifications
IS-IP290
IS-IP290 InSight™ IP 2.0 Megapixel Fixed Bullet with 18x Optical
Zoom
Regulatory
Emissions
Certification
Safety
Supported Protocols
Standards
FCC: Part 15, Class B
CE
UL Listed
TCP/IP, HTTP, FTP, RTP/RTSP, DHCP, IPv4/v6, UDP, HTTPS, ICMP,
SMTP, PPPoE, UPnP, IGMP, SNMP, QoS, ONVIF
Security
Access
Password / username protection for restricted camera access
Electrical
Consumption
Power over Ethernet
DC12V
AC24V
6 watts maximum
PoE 802.3af compliant
12 VDC +/- 10% Power
24 VAC +/- 10% Power
Camera Networking Requirements
 For ease of operation IS-IP290 possesses a built-in web, TFTP, and HTTP servers which can be used
to acquire images from the camera and to make adjustments of camera operation parameters.
 Images from the camera can be received using practically any internet browser by means of sending
human-readable API requests from the browser command line.
 The camera possesses a built-in ActiveX component that provides extended functionality when used
with Microsoft Internet Explorer. This option provides an easy-to-use graphical user interface.
 The built-in ActiveX component provides the ability to view streaming video from the camera and to
capture separate images as well as video streams using codecs available on the host computer.
 The ActiveX component provides convenient access to the camera settings and operation statistics.
 The camera provides integrated support for IP, TCP, FTP, UDP, ICMP, SMTP, DHCP, HTTP, HTTPS,
IPv4/v6, PPPoe, QoS, ONVIF, UPnP, and IGMP protocols.
 Software for viewing and controlling the camera is provided with the camera at no additional charge.
Event (Alarm) Handling Capability
 Alarm events can be triggered by motion detection in certain zones. In the case of the alarm being
triggered, a specified number of images before/after the trigger can be saved along with the time
stamp of when the alarm was triggered.
Connectors
 RJ-45 Ethernet connector (IEEE 802.3af PoE compliant)
 Power Supply: 3 Pin Terminal Block
Power Specification
 Power Consumption: 6 watts
 Power requirement: 12 VDC/ 24 VAC or via a 3-pin removable connector or via IEEE 802.3af Power
over Ethernet on CAT-5 cable.
Page 3
23807 W Andrew Rd, Suite B | Plainfield, IL 60585 | (800) 261-2707 | www.sentry360.com
A&E Specifications
IS-IP290
IS-IP290 InSight™ IP 2.0 Megapixel Fixed Bullet with 18x Optical
Zoom
Mechanical Specifications
 Weight: 1 lb (450 g)
 Dimensions: 7.22 x 3.16 x 2.06 in (183.3 x 80.2 x 52.4 mm)
 Camera contains no moving parts
 Camera Mount: 1/4-20 UNC (top and bottom)
Model Number
 IS-IP290 InSight™ IP 2.0 Megapixel Fixed- Bullet with 18x Optical Zoom
Warranty
 Minimum 3 Year Parts and Labor
Sentry360, Inc. reserves the right to change products or specifications without notice.
Page 4
23807 W Andrew Rd, Suite B | Plainfield, IL 60585 | (800) 261-2707 | www.sentry360.com