P&D Safety Orientation
Test # 2
Knowledge Evaluation
Final Exam (DVD Version)
Contractors/FTE’s and others taking the DVD version of this training will asked to complete 1 of 3 Final
Exams. (Note: This will be a selection of 20 amongst the 40 review questions). A passing grade of 100%
will be required. Your test score will be proof for an Imperial Oil Representative to issue you a wallet
card and record your completion.
1. What are Imperial Oil’s 3 Fundamental Mottos?
a) You’re on your way with Esso
b) Yesterday, Today, Tomorrow and Security is Nobody’s Business
c) Nobody Gets Hurt, Protect Tomorrow, Today, and Security is Everybody’s Business.
2. All workers have the right to refuse any work they feel may be unsafe
True or False
3. When are you expected to conduct an SPSA? (pick all that apply)
a) Before beginning any task
b) Only when the supervisor is watching
c) When conditions change during the task
d) After you have finished a task to double-check your work
4. To complete your safety orientation, you are expected to be familiar with the contents of
the Orientation Booklet.
True or False
5. Winter traction aids (ice cleats) are required to be used when working on slippery surfaces
or during icy conditions
True or False
1
6. All workers need to know the location of alarms, emergency telephones, emergency contact
numbers, fire extinguishers, eye wash stations, first aid kits and emergency shutdown buttons.
True or False
7. Imperial Oil facility fire extinguishers are for __________ use only.
a) Emergency
b) Standby
8. When hydrovaccing, sandblasting or using portable grinders/chopsaws, both impact goggles
and a faceshield must be worn.
True or False
9. The Receiver does not need to return the original copy of the Permit, along with copies of
any associated documentation such as JSA’s, checklists, etc., at the end of the job, as long as the
Issuer still has a copy in the Permit book.
True or False
10. The minimum PPE requirements to be worn at all times in operating areas are: (select all
that apply)
a) Hard Hat
b) Personal Floatation Device (PFD)
c) Double Hearing Protection
d) Gloves appropriate for the task
e) Fire Retardant/resistant Clothing (FRC)
f)
Safety Goggles
g) Safety Glasses with permanently fixed side shields
h) Safety Boots
i)
Faceshield
j)
Respirator
2
11. Personal Floatation Devices (PFD’s) must be worn within what distance of an unguarded
water hazard:
a) 1 meter
b) 2 meters
c) 3 meters
d) 4 meters
12. The P&D Orientation booklet contains specific safety rules and guidelines for specific topics and
pieces of equipment such as: (select all that apply)
a) Mobile equipment inspection and use
b) Ladders and working at heights
c) Proper bonding and grounding of equipment when transferring fuel
d) Rules when completing excavations or working around power lines
13. Using, possessing, distributing or being under the influence of alcohol or any illicit drugs will
likely end in expulsion from the site and/or termination.
True or False
14. The two types of Work Permits used at P&D facilities are: (select all that apply)
a) Confined Space Entry Permit
b) Working at Heights Permit
c) Electrical Lockout Permit
d) Cold Work / Hot Work Permit
15. Only those with special training can work with or around asbestos
True or False
16. A Work Permit becomes invalid and is considered revoked when: (select all that apply)
a) An emergency situation occurs on the worksite or within the facility
b) An electrical lockout is required
c) An excavation is needed
d) A change in work conditions conflicts with the stipulations on the permit
3
17. Metatarsal, or protection for the top of your feet, is required for the following jobs: (select all
that apply)
a) Jack hammering
b) Operating some earth tamping equipment
c) When using a sledgehammer
d) High pressure washing
e) Hydrovaccing
18. The Permit Receiver’s signature upon receipt of the permit indicates that: (select all that apply)
a) the Permit Receiver agrees that all the appropriate precautions have been or will
be established prior to work commencing
b) they agree to comply with the stipulations and conditions outlined
c) they will restrict the work to only the scope of work indicated for the location, with
only the tools, equipment and procedures identified
d) they will complete all of the assigned tasks before the permit expires
19. The Permit Receiver has the responsibility of reviewing the six points on the backside of the
permit, as well as all permit conditions, restrictions and stipulations with every member of the work
crew and obtaining their signoff. They must also maintain supervision of all work activities and
personnel who have signed on the work permit to ensure compliance with the permit conditions at
all times.
True or False
20. The Permit Receiver must ensure the Work Permit is available at the work locations for review
and inspection at all times.
True or False
Date: _____________________________________________
Name: ____________________________________________
Contractor: ________________________________________
Score: ____________________________________________
4