Danish Defence Acquisition and
Logistics Organization
_______________________________________________________________________________________________________
Technical specification for MIDS Crates to the Danish Armed
Forces
19-02-2013
Side 1 af 8
Danish Defence Acquisition and
Logistics Organization
_______________________________________________________________________________________________________
1.
SPECIFICATION
2.1. Description of requirements and Compliance Matrix
The below mentioned requirements and Compliance Matrix is divided into six (6) columns with the following information: identification
number (Tag), description of requirements (Requirements), category of requirements (Category), declaration of whether the
requirements is conditional (Conditional), declaration of whether the requirements cannot be fulfilled and thereby is unconditional
(Unconditional) and a column for the bidders possible comments (Comments).
2.2. Category
The requirements are divided into two categories:
SHALL (U): Bidder shall be able to fulfill these requirements in order to be taken into consideration for the tender.
SHOULD (C): These requirements will be evaluated together with the offered price. The results will be used in the final evaluation.
2.3. Description of purchase
The acquisition consists of one (1) MIDS Crate to be used for training purposes by the Danish Armed Forces, with an option to buy
further four individual (4) MIDS Crates.
19-02-2013
Side 2 af 8
Danish Defence Acquisition and
Logistics Organization
_______________________________________________________________________________________________________
Category
Tag
Requirement
1
Crate
1.1 (U)
The MIDS Support equipment shall be mounted
inside a transport crate.
SHALL
1.2 (C)
In order to easily move the transport crate, it should
be possible to mount removable wheels on the
bottom of the transport crate.
SHOULD
Conditiona Unconditional
l (mark
(mark with X)
with X)
Comments
As a minimum the following equipment/functions
shall be in the transport crate:
2
MIDS mounting tray:
2.1 (U)
It shall be possible to mount a MIDS Low Volume
Terminal 1 (LVT 1) (RT-1840) in the tray.
SHALL
2.2 (U)
It shall be possible to mount a Remote Power
Supply (RPS) (PP-8476) next to the MIDS LVT, in
SHALL
19-02-2013
Side 3 af 8
Danish Defence Acquisition and
Logistics Organization
_______________________________________________________________________________________________________
the tray.
2.3 (U)
All necessary connecting cables between the MIDS
LVT 1 and RPS shall be delivered with the MIDS
Support Crate.
SHALL
2.4 (U)
There shall be a forced cooling of the MIDS LVT
and RPS in the tray.
SHALL
2.5 (U)
In order to avoid a MIDS LVT and RPS breakdown
as a result of operating under too high
temperatures, there shall be a MIDS LVT overtemperature monitoring and reporting function in the
tray.
SHALL
3
Power Supply shall as a minimum consist of:
3.1 (U)
A 115-230 VAC and 50-60 HZ Power Supply
providing VDC for the RPS.
SHALL
3.2 (U)
Danish power plugs in accordance with Danish
regulations (SR para 107-2-d1) or SRAF1962/DB
16/87 DN10A-R.
SHALL
19-02-2013
Side 4 af 8
Danish Defence Acquisition and
Logistics Organization
_______________________________________________________________________________________________________
3.3 (C)
There should be 3 spare power outlets in
accordance with Danish regulations (SR para 1072-d1) or SRAF1962/DB 16/87 DN10A-R, in the
crate.
4
Functions and readouts (in a number of panels)
shall as a minimum consist of:
4.1 (U)
FAIL DECODE indicators:
SHOULD
SHALL
To provide the operator with the last MIDS BIT
results.
4.2 (U)
RT ADDRESS switches:
SHALL
To select the MIDS 1553-bus Remote Terminal
Address.
4.3 (U)
IO IDENT switches:
SHALL
To select the MIDS platform type.
4.4 (U)
CRYPTO CONTROL area:
SHALL
To provide controls for the MIDS keys management:
19-02-2013
Side 5 af 8
Danish Defence Acquisition and
Logistics Organization
_______________________________________________________________________________________________________
4.5 (U)
- To load the keys “FILL”
- To erase the keys “ZEROISE”
- To keep the keys “HOLD/NO HOLD”
MIDS TERMINAL (MT) CONTROL:
SHALL
To provide controls and indicators for terminal
management –
4.6 (U)
- To switch the terminal “ON/OFF”
- “PWR” for terminal power supply indication
- “TERM Fail” for MIDS BIT indication
- “MT Fail” for MT BIT indication
- “RPS Fail” for RPS BIT indication
POWER SUPPLY area:
SHALL
To provide indicators for DC power supply –
4.7 (U)
- “Prime” to light when 28VDC is supplied
- “12VDC” to light when 12VDC is supplied
- “RPS” to light when 280VDC is supplied
COOLING area:
SHALL
To provide indicators for MIDS cooling –
-
“Air Flow” to indicate when forced air is
provided (Support to 2.4 (U)).
19-02-2013
Side 6 af 8
Danish Defence Acquisition and
Logistics Organization
_______________________________________________________________________________________________________
“TEMP” to indicate for MT over-temperature
(Support to 2.5(U)).
Voice 1 area:
-
4.8 (U)
SHALL
To provide the MIDS Voice Port 1 functions –
4.9 (U)
- Voice traffic indicator
- Push to Talk
- Audio level
- Headset plug
Voice 2 area:
SHALL
To provide the MIDS Voice Port 2 functions –
5
5.1 (U)
- Voice traffic indicator
- Push to Talk
- Audio level
- Headset plug
External interfaces shall (in a number of panels)
as a minimum consist of:
RF output with the following:
-
SHALL
Antennas A & B (type N coaxial connectors)
Integrated RF load for unused antennas.
19-02-2013
Side 7 af 8
Danish Defence Acquisition and
Logistics Organization
_______________________________________________________________________________________________________
5.2 (U)
6
Host interface with the following:
SHALL
- 1553 Primary Data Bus(BNC coaxial)
- 1553 Secondary Data Bus (BNC coaxial)
- Data Bus Ethernet (RJ45 Ethernet)
- Support Port (RJ45Ethernet)
- Input for External Time Reference
Extra space (Rack Unit = U) that should house
the following:
6.1 (C)
One (1) U for GPS
SHOULD
6.2 (C)
Two (2) U for PC
SHOULD
6.3 (C)
One (1) U for Keyboard/display tray
SHOULD
7
Delivery
7.1 (U)
Delivery shall take place no later than five (5)
months after DALO submits the purchase order.
19-02-2013
SHALL
Side 8 af 8