Choosing The Right Bat

advertisement
Buying a Glove
Whether you are looking for a child's first baseball glove, or replacing one that's worn out or outgrown,
there are choices to make that can have a big influence on the player's performance, success, and
ultimately, his fun.
The first glove is perhaps the most important piece of equipment a player will ever own. Why? It's his first
connection to the game, and a glove that works well for him will help him play his best, whereas the
wrong glove will inhibit his success, reduce the amount of fun, and possibly discourage him from
continuing on in baseball after the season is over.
The key to that beginner's glove is control. He must be able to move the glove quickly to the ball, which
requires a glove that's not too big and heavy for him. He must be able to close the glove with his hand, so
that the ball does not pop out. This requires a glove that is soft and pliable enough when purchased, or
after a very short break-in, that he can close the pocket and 'squeeze' the ball. And it requires a glove that
is comfortable and fits his hand well, so he's not constantly fooling around with it in the field.
We recommend a glove that is in proportion to the player's size. We've seen T-ballers, all of four feet tall,
lugging around huge 13-inch outfielder's gloves. The parent thought it would help them catch more balls,
but the truth is, it is a huge handicap as they have no glove control. They'd do better barehanded than
with that leather mattress on their little paw!
As youth sizes begin around the nine-inch pattern range (the measurement is from the bottom of the heel
of the glove to the top of the longest finger or webbing), there is a proper glove for every kid. The new
generation of pre-oiled gloves are usually excellent, as they are very supple and require little or no breakin. For a very small child, or one with less strength than his peers, you can look into some of the vinyl, or
combination vinyl-and-leather models. These are very inexpensive and, while they will not last as long as
higher quality gloves, they bend easily and allow the player to catch the ball from day one. There are also
full leather gloves in the under-11 inch size, which cost more, last longer, and might require some breakin.
Some new models even have a notch designed into the heel of the glove to allow easy and immediate
flexing of the pocket.
Beware of small (11 or 111/2 inch) professional model infielder's gloves. Professional shortstops and
second basemen use small gloves, which can be mistaken for youth models, except for their high price.
These are usually a very good, durable, and stiffer hide, which requires break-in even for the bigger guys
and pros, and will never break in sufficiently for a beginner. As much as you want to buy the best for your
kid, avoid the expensive, stiff gloves for players under 10 or so. They'd have to play eight hours a day,
seven days a week, for six months before it was broken in. And in that time, they'd make so many errors
that they'd be shopping for soccer cleats by then!
Replacement Glove
As the player advances up the ladder, he may outgrow his glove, or it may be worn out. A good quality
leather glove, if it still fits him and he plays well with it, is worth having repaired. New lacing, webbing,
patching, and any other repair can be carried out by specialists (see "Old Glove Repair", December 1996
issue).
If it's time for a new one, however, there are again a lot of choices. Is the player significantly larger than
he was when he got his first glove? Is he playing outfield or infield more?
There are four basic glove types: infield, outfield, first baseman, and catcher. Most youth players are not
yet specialized enough to invest in a first baseman's mitt, and their regular glove will suffice for duty at the
first bag. Catcher's mitts are often supplied by the league, but if he's on a club team, and he catches, he'll
have to buy his own catcher's mitt. Without going into detail here, simply get the size that fits him - youth
or high school. The adult sizes will probably be too large for good control.
For a youth playing different positions, a good range of fielder's gloves would be the 11-1/2 to 12-inchers.
These are not too unwieldy for the quicker moves required in the infield, yet offer enough 'reach' in the
outfield. As the glove increases by half-inch increments, its overall dimension increases geometrically,
and weight increases as well.
At this stage, a higher quality glove is a good investment. Again, fit is crucial, and if it doesn't feel good in
the store, it's not going to get much better after break-in. Sort of like buying a pair of shoes. Gloves in the
$50 to $100 range include just about every style, size, and quality level you'll need. We'd avoid any
gloves constructed with vinyl, and it's up to you if you want to spend upwards of $200 or more for the top,
premium 'pro' gloves.
For a player who logs most of his time in the infield, stick to the smaller 11 or 11-12 inch gloves. A preformed pocket is preferred, deeper for third base and shortstop, shallower for second base (although this
sort of specialization at the youth level is not recommended). The outfielders have a larger selection, it
seems, with a huge selection of 12 to 12-1/2 inch models. Anything larger than 12-1/2 inch is too much
glove, generally, unless he plans to play softball!
Breaking-in
There are as many theories regarding glove break-in as there are players. But some are pretty farfetched. One we've heard is to soak the glove in water, then place a ball in the pocket, wrap it with a
leather belt, place it in a plastic bag and store it in a warm place. I think you'll end up with a waterlogged,
mildew-covered chew toy for the dog when you're finished.
Another had you oil the glove and place it in the oven on low for a couple hours, to get the warm oil to
penetrate the pores. We know of one very impatient player who tried it in the microwave! His result? Beef
jerky!
We asked some experts their methods of glove break-in:
Rawlings' "master glove designer" recommends:
1. Press a small amount of shaving cream with lanoline on a clean, dry cloth and carefully work the cream
around the outer shell, palm, and back. A light coating is all the is necessary. This will lubricate the
leather fibers.
2. Allow the cream to dry thoroughly for 12 to 24 hours.
3. Wipe off the glove and play catch for 10-15 minutes, or 50 to 70 throws.
This stretches and conforms the glove to your hand and speeds the break-in process,
4. Position a ball in the pocket and tie the glove closed for a few days with a string or rubber band around
the outer perimeter. An option is to use the new Rawlings "Mit Kit", which is designed to quickly form the
'ideal' pocket. It includes a double-ended pocket form with a large sphere on one end and a smaller
sphere on the other, to form the pocket and the web area simultaneously, and a wide elastic 'figure 8' to
hold the glove firmly around the form.
5. As the glove starts to break in, pour a small amount of 'Glovolium' on a clean, dry cloth, and carefully
work the oil around the outer shell, palm, and back. A light coating is all that's needed.
6. Allow the glove to dry thoroughly for 24 hours so the oil has time to penetrate and condition the leather.
7. Store the glove in a cool, dry place with a ball in the pocket, or a Mit Kit when not in use.
8. Lace will stretch with use. Keep laces taut but do not overtighten. Check for replacement if necessary
after each season.
9. Do not over oil your glove! Twice a season is sufficient!
Wilson's Jim Hackett explains his favorite method:
"With full-grain leather, most major leaguers use foamy style shaving cream to break in their ball gloves.
On a clean glove, spread the shaving cream all over using your hand or a towel. Let the cream-covered
glove sit for at least 15 minutes, then wipe off the excess shaving cream and pull/push/pound/massage
the glove for a while, shaping the pocket the way you want it. Play some catch and keep pounding it.
Sometimes a bat works as a good mallet to pound the pocket (or get a Pocket Shaper to do the job).
Clean the glove off and repeat the process. Depending on the stiffness of the leather, the glove should be
ready in an hour or less, but the pocket will continue to improve over several practices or games."
Cal Ripken, Jr., says:
"I don't do anything strange, like soak it in water or anything. I play with it in practice a lot, and maybe rub
a little vaseline into the palm. I break in a couple of gloves, and if one seems to have the potential to be a
game glove, I save it for games once it's ready. I tighten the laces as the glove breaks in over a period of
time, so it forms closely to my hand. I don't let anyone else put their hands in my gloves, as they can
change the fit and feel. Practice gloves get a lot more wear with all the ground balls and drills. I've had
one game glove that lasted me three years, but most last only one."
Tip :
Bring the player to the store to try on gloves. Have him put on a few that feel good to him, not too loose,
and see which ones he can easily hold a baseball in with his palm facing downwards.
Don't be influenced by "autographs" of famous players on the glove, or particularly cool graphics.
Nothing's more cool than seeing your kid make a great catch because he had good glove control! In the
beginning, his limited skills and budding enthusiasm for the game require a glove that's truly 'userfriendly'.
Tip:
Buy the smallest glove that will do the job properly for the player. The increase in glove control far
outweighs the advantage of additional reach.
Choosing The Right Bat
Choosing The Right Bat
One of the most important factors in a young player's enjoyment of the game is his (or her) success at the
plate.
Besides proper training in the art and science of hitting a baseball, the bat itself plays a big role. Too
many well-meaning but uninformed parents buy their kid a bat that is the wrong length or weight, or both.
This adds yet another obstacle to the budding player's efforts to succeed.
The choices include different materials, different barrel sizes, different weights, different lengths, and
different models for Tee Ball, Youth Baseball, Senior League Baseball, High School baseball, and
College ball.
As a rule of thumb, we suggest the lightest bat of a given length that you can afford. The high-tech alloys
in the lightest bats cost the most, while inexpensive bats made from cheaper aluminum - which requires
thicker walls for strength - are heavier.
Here are some formulas recommended to determine bast size
Height - Bat Weight
48 in. 16 oz.
50 in. 16.5 oz.
52 in. 17 oz.
54 in. 17.5 oz.
56 in. 18 oz.
58 in. 18.5 oz.
60 in. 19 oz.
66 in. 27 oz. (oldder players)
68 in. 27.5 oz.
70 in. 28 oz.
72 in. 29 oz.
74 in. 30 oz.
76 in. 30.5 oz.
Younger Players - Formula = Height/3 + 6
Older players - Formula = (Height/4) + 4
Weight - Bat Weight
70 lbs. 18 oz.
80 lbs. 19 oz.
90 lbs. 19.5 oz.
100 lbs. 20 oz.
110 lbs. 20.5 oz.
120 lbs. 21 oz.
130 lbs. 21.5 oz.
140 lbs. 22 oz.
150 lbs. 23 oz.
Formula = (Weight/18) + 14
According to Louisville Slugger bat engineer George Manning, "Performance of the bat goes up as the
walls are thinned down in aluminum bats. High-strength alloys allow the walls to be thinned while
retaining strength needed for durability. A starting player needs to learn to make contact with the ball and
hit close to the "sweetspot" of the bat before performance differences in the bats become an important
factor."
Length-to-weight ratio is perhaps the most important factor in buying a bat. This is a negative number
denoting the amount of ounces the bat weighs less than the amount of inches its length. For example, a
30-inch bat that weighs 20 ounces is a -10. The greatest differential commonly found is -12. for youth
bats. Senior League bats are -7, used in Senior Little League as well as Pony, and -5 is for High School.
Some of the mysterious letters and numbers on modern bats indicate the materials with which they're
made. For example, 7046 is a lower-end alloy, usually used in cheaper youth bats. CU31 is a fairly
common alloy, once the hottest stuff, but now used in the mid-range bats. It gave way to the current crop
of C405 alloy bats, generally the top-of-the-line in most cases. Easton's Reflex, Worth's Copperhead,
Louisville Slugger's Air Attack2, and DeMarini's all come in C405 (Worth does make lower end
Copperheads as well). Easton also has a more modern-yet C500 alloy, and an SC500 which includes
Scandium, an element purportedly used in Russian missile casings for strength and lightness. These
pricey alloys comprise the popular Redline and Z-Core series.
Bat barrel diameters are usually 2-1/4 inch, 2-5/8 inch, or 2-3/4 inch. The smallest size is required by Little
League (up to age 12) as well as some lower divisions of other organizations. Be clear on what limits
there might be in your child's league before buying a bat. The larger barrel diameters decrease length-toweight ratios due to the increased material to make them. They usually have more 'pop' in them and hit
the ball harder too.
Worth recently completed a project with a research group to determine the best bat weight for players in
youth and adult baseball (see charts). It should be noted that the ideal bat weight for maximum hit ball
speed is approximately one ounce heavier than the recommendation. The reason for this is that the
research showed there is negligible loss of hit ball speed by reducing bat weight one ounce below the
ideal, and the increased bat control with the lighter weight more than compensates.
Atlanta Braves' Chipper Jones recently spoke at a clinic at the ABCA Convention in Atlanta. He was told
as a rookie to "swing the heaviest bat you can get around on a 90-mph pitch," so Chipper practiced in the
off-season with a 39 oz. bat. In games, though, he uses a 33 oz. bat, unless he's facing Curt Schilling,
Kevin Brown, or someone else who brings it in the high 90s. Then he drops an ounce and maybe even an
inch.
The point is, even a Major League player goes to a lighter bat to maintain bat speed, which is top priority
in hitting. So it's that much more crucial for a young, undeveloped player to have a light enough bat to
swing with enough bat speed to hit the ball with some authority.
When shopping for a bat, have your child hold it out to his side with the top hand (right hand for righthanded batter). If he cannot hold it straight out for 20 seconds or so without the arm starting to shake and
the bat dropping, it's too heavy.
It's difficult to get a feel for a bat in a store, and even if you could safely swing it there, it's very different
from swinging at pitched balls hurtling towards you. If you really want to do some research, take your kid
to a local batting cage and have him hit with a selection of cage bats available there on loan. You'll see
right away which ones are obviously too small, too big, or too heavy. It's dialing it in to the exact right inch
and ounce that's tricky. But if you get close, and even if the bat might be an inch too long (remember - a
longer bat puts more weight out further from the hands, which in effect makes it heavier to swing than a
shorter bat of the same weight), the player can choke up a little. If he needs to choke up more than an
inch, however, go to the next inch-size down.
Players over the age of 13, playing in advanced leagues, club ball, or high school, are usually adept
enough to figure out the bat that's best for them, and can borrow teammates' bats to experiment. It's the
younger guys that need guidance and the right decisions made by mom and dad (or coach) to ensure
they're swinging the right bat for their size, strength, and skill level.
Choosing the correct bat size isn't easy. There is no hard and fast rule about how to figure it out. It
depends on many variables: the player's size, bat speed, swing type, and confidence at the plate. In the
end, the best way to find the right bat size is to try out a few different ones. Have your son use the bat of
a few teammates in batting practice or a game situation. He'll find the right size soon enough.
However, there is one thing to be on the lookout for. Each year, bats become lighter thanks to advances
in technology. This typically results in younger players using bats that are of the same weight, but a few
inches longer than they should be. Consider this: many 12-year olds use 30-32 inch bats because they
usually weigh close to 20 ounces. In contrast, Tony Gwynn used a 32 inch bat for most of his major
league career. In most cases, many common hitting problems (wrapping, hitching, slow bat speed) can
be solved by using a slightly shorter bat.
Download