Specification and conditions for purchase of one
armored vehicle with the protection class not less than
B6/VR7.
The specification is made on the base of Toyota Land Cruiser yet all
options of other manufactures that match or are above the below
mentioned requirements will be considered without preferences.
Engine
 Diesel Twin Turbo
 8 Cylinder, 32 –valve DOHC 4500cc (fuel tank capacity 138ltrs)
 Max Output 232 kW @ 3600 RPM
 Max Torque 627 Nm. @ 2200 RPM
 Compression Ratio 44:6 : 1
Transmission & Steering
 5 Speed automatic
 Center differential lock
 Tilt & telescopic steering column
 Power Steering Wheel
Suspension & Brake System
 Torsion bar double wishbone & stabilizer bar independent suspension
 4 link-type rigid axle with coil spring & stabilizer bar
 Ventilated disc brakes
 ABS-EBD brake assist
Features
 Air Conditioning
 Smart key system with start – stop button
 17” Alloys Wheels
 Fabric seats
 Cool box
 Towing hook
1
Specifications of Armor & Vehicle Alterations
 Five sided armoring of passenger cabin to give maximum protection
against 7.62 x 51mm & 5.56 x 45mm (SS109)
 A, B, C & D pillars are protected with armor this includes rear wheel
humps & firewall. This adds structural rigidity to the overall vehicle.
 All passenger doors are fitted with 100% overlap system which
provides maximum strength retention to prevent penetration through
door posts & pillars, roof will protect against 45 degree angle shots.
 Vehicles armor plates are stitch-welded using high-intensity MIG
welders. The above process ensures the structural integrity is
uncompromised by thermal and chemical variations of the material.
 The glass is installed using ballistic grade steel frame for added
protection which gives extra support to help prevent cracks &
fractures this also provides back up protection around these
potentially weak areas which are commonly missed by other
manufactures.
 The door hinges are replaced with custom-engineered heavy duty
hinges bolted directly onto the armor through the pillars & the doors
this prevents stress on the hinges and the internal panels which usually
crack under the strain.
 Floor is fitted with blast protection to protect occupants against
fragmentation from simultaneous detonation of 2 DM-51 German
ordnance hand grenades or equivalent
Transparent Armor – Sun Advance
 40mm - (+/-5%) Curved glass, PVB/polycarbonate laminate
6.2kgs./sq.ft(13.7lbs/sq.ft)
 Glass is manufactured using quality & strict selection of materials
which provides the following features, Anti-Spall shield protects
against glass splinters, chemical attacks. Autoclave temperature
allows the polycarbonate to lose its memory to prevent delaminating
& internal stress. The glass also provides multi hit protection.
 The ballistic performance of bullet resistance glass is diminished
when the glass is exposed to high temperatures; Solar Plus ensures
total ballistic resistance performance for a longer period of time.
 Glass is tested in accordance with EN 1522 & EN 1063 European
Level B6 – NIJ Level III
Electrical
 All electrical equipment standard to this vehicle shall be tested and
modified as necessary to protect against the armoring process.
2
Standard Security Features
 Runflat devices fitted in all five wheels ( Hutchinson)
 Fuel tank & sub tank encased with ballistic steel to protect against
explosive device projectiles
 All four passenger doors fitted with heavy duty webbed door straps
 Battery is protected within an armored box in the engine compartment
 Exhaust protection to prevent foreign objects being inserted
 Suspension is upgraded with heavy duty front & rear shocks &
springs to compensate for the additional weight
 Gun-ports are installed below both L/H & R/H quarter windows
Special requirements:
- All gunports are concealed and are not visible from the outside
- Availability of certification such as * Ballistic certification :
QinetiQ/TS/FPPS/TR1004601 and * Grenade certification :
QinetiQ/TS/FPPS/TRD1005193.
Payment conditions:
In case of partial advanced payment, final payment shall be processed
only after IOM’s acceptance of the goods/works/services. Advanced
payment terms are strongly discouraged. Where an advance cannot be
avoided and exceeds USD 5,000, it should be secured by a Bond or Bank
Guarantee from a reputable firm or bank (attached in the annex).
Terms of warranty:
For armored part it should not be less than 12 months. General warranty
for the vehicle corresponds to the one, provided by manufactory and
could be valid on the territory of Ukraine without any concerns.
Terms of delivery: DAP, Kiev, under Incoterms 2010.
Period of delivery:
Not more than 65 calendar days from the date of contract
commencement.
3