chnical data Weinig Unimat 23EL
Working width (the diameter of the circle cutting 140 mm) 20-230 mm
Working height (with a diameter of 163 mm with tools) 8-160 mm
Mechanical feeding, stepless 6-36 m / min
Characteristics spindles Weinig Unimat 23EL
1 lower horizontal spindle
Engine with a mechanical brake 7.5kW
Spindle diameter 40 mm
Engine speed 8000 rev / min.
Diameter with tools 125-180 mm
Axial adjustment of 17 mm
2 right vertical spindle
7.5 kW motor
Spindle diameter 40 mm
Engine speed 8000 rev / min.
Diameter with tools 112-250 mm
Maximum tool diameter 203 mm
The maximum depth of 35 mm mold
Axial adjustment of 80 mm
3 left vertical spindle
Motor with mechanical brake 7.5kW
Spindle diameter 40 mm
Engine speed 8000 rev / min.
Diameter with tools 112-200 mm
The maximum depth of 35 mm mold
Axial adjustment of 80 mm
Clamp shoe before the left spindle, incl. Side roller clamp, spring clamp
4 top horizontal spindle
Motor with mechanical brake
7.5 kW
Spindle diameter
40 mm
Speed
8000 rev / min.
Diameter with tools
112-250 mm
The maximum depth of mold
15 mm
Cell clamp shoe before the upper stem, reinstall the diameter of the circle cutting tool and deviating
from the tool, pneumatic.
After the presser shoe upper spindle with mechanical digital display, with optional angle to the desktop.
5 bottom horizontal spindle
Motor with mechanical brake 7.5kW
Spindle diameter 40 mm
Engine speed 8000 rev / min.
Diameter with tools 112-250 mm
The maximum depth of 15 mm mold
The value of the axial adjustment of 45 mm
6 universal spindle 360 Gy.
Motor with mechanical brake 7.5kW
Spindle diameter 40 mm
Engine speed 8000 rev / min.
Diameter with tools 112-250 mm
The maximum depth of 15 mm mold
Features of the four-spindle machine Weinig Unimat 23EL:
All spindles molders have high rotation accuracy, increased speed-8000ob/min (increase in productivity
and the quality of gouging);
The central position of the lubrication points on the front of the machine.
Supply system Weinig Unimat 23EL:
Motor 5.5 kW
Feed rollers before the 1st bottom spindle mounted on the "height-depth" pneumatically
Needle rollers (patented «Weinig») c depth gauge, self-cleaning
Beam delivery can be set at an angle to the desktop
Electrical machine Weinig Unimat 23EL:
Operating voltage of 400 V (voltage range 380 - 420 V), 50 Hz
Machine table, stops Weinig Unimat 23EL
Table 1,2 m long (including jointing line)
Drive roller in the output table, a seasoned
Four driven rollers in the table, tempered
Plate to secure the wooden table under the upper spindle liner
Configurable output table (0/0, 5/1, 0 mm)
Vaksilitny pump with lever grease table
Pressing members and guides Weinig Unimat 23EL
Top pressure rollers, spring
Axial movement of the feed roller to the left spindle - 35mm
Service machine Weinig Unimat 23EL
Electric height adjustment of the upper spindle and feed
Safety and noise protection Weinig Unimat 23EL
Easy to lift the cover of the window covers the entire work area (supply and spindles) and protect from
damage.
When lifting the guard spindles and feed automatically disabled.
With CE - performance open casing automatically impossible.
Two lamps interior light machine