FLOTATION PROCESS OPTIMIZATION OF COPPER ORE USING DIFFERENT REAGENTS Gracijan Strainović1, Zoran Marković2 1 2 RBB, RTB Bor – Flotation “Veliki Krivelj”, Kestenova 8. 19210 Bor, Serbia. Universiti in Belgrade - Technical faculty in Bor, Vojske Jugoslavije 12, 19210 Bor, Srbia. Abstract Copper ore from the Veliki Krivelj (RTB Bor, Serbia) is a porphyry type, main mineral of copper is chalcopyrite. The most important accompanying mineral is pyrite, content in the ore is about 10%. In a sample of ore from the mine Veliki Krivelj it was carried out research with the aim to determine the optimal reagent regime. Experiments were carried out with the available flotation reagents, the goal is to determine the influence of each collector on copper recovery and to determine the optimal combination of collectors also the optimum dose of the collector. Reagents applied in the study are IPETC, PEX, SIPX, MBT (Isopropyl ethyl thionocarbamate, Potassium ethyl xanthate, Sodium isopropyl xanthate, Mercaptobenzothiazole). In the following studies were carried out experiments to determine the effect of fineness of grind on the recovery of copper. The results indicate that is the biggest copper recovery using a combination IPETS and PEX also the results show that the copper recovery directly proportional to grinding fineness.