AISI 1030 Steel, cold drawn, 19-32 mm (0.75-1.25 in) round Categories: Material Notes: Key Words: Vendors: Metal; Ferrous Metal; Carbon Steel; AISI 1000 Series Steel; Medium Carbon Steel Moderate strength and hardness in the as-rolled condition, can be strengthened and hardened by cold work. Fair machinability and weldability. ASTM A545, ASTM A546, ASTM A682, DIN 1.1172, FED QQ-S-635 (C1030), FED QQ-S-700 (C1030), MIL SPEC MIL-S-11310 (CS1030), SAE J403, SAE J412, SAE J414, UNS G10300, ASTM A29, ASTM A108, ASTM A510, ASTM A512, ASTM A519, ASTM A544 No vendors are listed for this material. Please click here if you are a supplier and would like information on how to add your listing to this material. Physical Properties Metric Density 7.85 g/cc Mechanical Properties Hardness, Brinell Hardness, Knoop English 0.284 lb/in³ Comments English Comments Metric 149 169 149 169 Hardness, Rockwell B 80 80 Hardness, Vickers 155 155 Tensile Strength, Ultimate Tensile Strength, Yield Elongation at Break Reduction of Area Modulus of Elasticity Bulk Modulus Poissons Ratio Machinability 525 MPa 76100 psi 440 MPa 63800 psi 12 % 35 % 205 GPa 140 GPa 0.29 70 % 12 % 35 % 29700 ksi 20300 ksi 0.29 70 % Shear Modulus 80.0 GPa 11600 ksi Converted from Brinell hardness. Converted from Brinell hardness. Converted from Brinell hardness. In 50 mm Typical for steel Typical for steel Typical For Steel Based on AISI 1212 steel. as 100% machinability Typical for steel Electrical Properties Metric English Comments Electrical Resistivity 0.0000166 ohm-cm 0.0000166 ohm-cm annealed specimen @Temperature 20.0 @Temperature 68.0 °C °F Thermal Properties Metric English Comments CTE, linear 11.7 µm/m-°C 6.50 µin/in-°F @Temperature 15.0 - @Temperature 59.0 75.0 °C - 167 °F Specific Heat 0.486 J/g-°C 0.116 BTU/lb-°F annealed Capacity @Temperature @Temperature >=100 °C >=212 °F Thermal Conductivity 51.9 W/m-K 360 BTU-in/hr-ft²-°F Component Elements Metric Properties Carbon, C 0.27 - 0.34 % Iron, Fe 98.67 - 99.13 % Manganese, Mn 0.60 - 0.90 % Phosphorous, P <= 0.040 % Sulfur, S <= 0.050 % English 0.27 - 0.34 % 98.67 - 99.13 % 0.60 - 0.90 % <= 0.040 % <= 0.050 % Comments As remainder References for this datasheet. Some of the values displayed above may have been converted from their original units and/or rounded in order to display the information in a consistent format. Users requiring more precise data for scientific or engineering calculations can click on the property value to see the original value as well as raw conversions to equivalent units. We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding error. We also ask that you refer to MatWeb's terms of use regarding this information. Click here to view all the property values for this datasheet as they were originally entered into MatWeb. Source: MATWEB.com