AS/NZS 4801 OHSAS 18001 OHS20309 SAI Global RISK ASSESSMENT WORKSHEET Risk Assessment Title: Details of Process: Risk Register: Campus Clayton Faculty/Division Building Room No. Risk Assessment Team Name Approval Supervisor Name: Signed: Chemical Engineering Assessment Date Signature Hazard Categories applicable to this Risk Assessment Animal/Insect/Vegetation Biological Chemical Hazardous Areas Risk Assessment Number: Engineering School/Department/Centre Date Name Equipment/Machinery/Vehicles Outdoor Hazards Water/Gases/Liquids Radiation Date: Signature Date Manual Handling/Ergonomics Psychological/Social Physical Hazards Other INSERT PHOTO or DIAGRAM AS APPROPRIATE Risk Control Program, v4 Date of first issue: October 2002 Responsible Officer: Manager, OH&S Date of last review: December 2015 For the latest version of this document please go to: http://www.monash.edu.au/ohs/ Page 1 of 3 20/02/15 Hazard Current Controls 2 1 Chemical exposure Likelihood Consequences Current Risk 3 4 5 Proposed Controls 6 Responsible Person 7 Likelihood 8 Consequence s 9 Residu al Risk 10 PPE(Laboratory coat, safety glasses, enclosed shoes, long hair tied back) Wear a full face shield when handle strong acid Type of gloves should be used to handle the chemicals Wash hand before and after handling the chemicals Remove gloves using the Glove removal technique Working conditions : such as work in the fume cupboard Working Environment should be avoid List of incompatible chemicals should be avoided / careful when mixing Storage conditions ( flammable cabinet,, temperature…) Risk Control Program, v4 Date of first issue: October 2002 Responsible Officer: Manager, OH&S Date of last review: December 2015 For the latest version of this document please go to: http://www.monash.edu.au/ohs/ Page 2 of 3 20/02/15 Waste Disposal: Risk Control Program, v4 Date of first issue: October 2002 Transfer the waste chemical to a PE plastic container with vented cap. Label the container with the name of chemicals, DG class sticker label, the prepared date and User name on the label. Only compatible waste chemicals are allowed to add into this waste container. Other incompatible chemicals such as …………..” should not be added to this container. Send the surplus to P2P hub for disposal via Chemsal. For solution, when the container is ¾ full or 3 months old, take this container to the P2P hub in room G02 building 37 to dispose off. Responsible Officer: Manager, OH&S Date of last review: December 2015 For the latest version of this document please go to: http://www.monash.edu.au/ohs/ Page 3 of 3 20/02/15