Event Room C : Mechanical and environmental properties of materials, High
temperature structural materials
-Room No. 447 (D1 building)-
July 18
Registration open
08:00
Chair: Dong-Chul Shin,
09:0009:20
09:2009:40
09:4010:00
10:0010:20
10:20
10:40
10:4011:10
Co-Chair: Wanjae Kim
Keynote speech: Professor X.P. Song, Xi`an Jiaotong University, China
C101
C102
Influence of the radius of notch curvature on fracture load of piezoelectric ceramics
Dae-Weon Kim, Dong-Chul Shin, Yeong-Min Park, Tae-Gyu Kim
Welding residual stress analysis of 347H austenitic stainless steel boiler tubes using experimental
and numerical approaches
Wanjae Kim, Kwang Soo Kim, Hansang Lee, Keunbong Yoo
C103
Coffee break
Opening Ceremony
Chair: Yun-Hae Kim
Plenary speech 1 : Prof. Hong-Kyu Lee, KAIST, Korea
Title : Idea Factory: A Meaningful Driver for Engineering Education
11:1011:40
Plenary speech 2 : Prof. Jitai Niu, Harbin Institute of Technology, China
11:4012:10 Title: Vacuum brazing of high volume fraction SiC particles reinforced aluminum matrix composites
12:1013:20
Lunch break
Chair: Chang-Min Suh,
13:2013:40
C104
13:4014:00
C105
14:0014:20
C106
14:2014:40
14:4015:00
C107
Coffee break
Chair: M. Goto,
15:0015:20
15:2015:40
15:4016:00
16:00-
Co-Chair: Chobin Makabe
Fatigue properties of Al alloy depending on surface treatment and fatigue testing methods
Min-Soo Suh, Chang-Hee Suh, Chang-Min Suh, Seung-Hoon Nahm
The effects of two-step solution heat treatment of Al-6Si-2Cu alloy for lightweight automotive on
mechanical properties
Seung-Pyo Hong, Chung-Seok Kim
The effects of two-step solution heat treatment of Al-6Si-2Cu alloy for lightweight automotive on
mechanical properties
Seung-Pyo Hong, Chung-Seok Kim
C108
C109
C110
C111
Co-Chair: Liuyi Xiang
(Invited Talk) Fatigue induced damage and crack growth of Cu processed by ECAP
M. Goto, S. Z. Han, K. Morita, J. H. Ahn, J. Kitamura, M. Baba, S. S. Kim
Fabrication and properties of laminated HfC-SiC/graphite ceramics
Liuyi Xiang, Laifei Cheng, Fuyuan Wang, Litong Zhang
Ethanol vapour sensing property of nitrogen doped ZnO fabricated by spray pyrolysis
A. V. Patil, S. B. Handge, C. G. Dighavkar, R. N. Shelar, D. R. Patil
Temperature effect for friction and wear characteristics of solid lubricating graphite
16:20
Yeonwook Kim, Jaehoon Kim, Sunghan Park, Hwangyu Lee
July 19
Chair: Tae-Gyu Kim
09:0009:30
09:3010:00
Plenary speech 3 : Prof. Hyoung Jin Cho, USA
Title : Liquid actuators based on electrocapillary and thermocapillary
Plenary speech 4 : Dr Hajime Sakakita, AIST, Japan
Title : Industrial applications using innovative plasma technologies (Developments of the low
energy ion beam, and studies on medical applications)
10:0010:40
Coffee break
Chair: Xiaomeng Fan,
10:4011:00
11:0011:20
C201
C202
Co-Chair: Min Hyeok Park
Dominant variables for hardening of axle shaft through high frequency induction heating
Min Hyeok Park, Jin Kyu Choi, Kwang Sik Nam, Dong Uk Lee, Seok Soon Lee
Research for anti-corrosion multi layer coating based on diamond-like carbon and anodic
aluminum oxide
Tae Ho Kang, Hyun Cho, Jin Kon Kim, Tae Gyu Kim
11:2011:40
C203
11:4012:00
C204
Ablation performance of high thermally conductive C/SiC-Ti3SiC2 composites under arc-heated
wind tunnel
Xiaomeng Fan, Xiaowei Yin, Laifei Cheng, Litong Zhang
12:0015:00
The microstructure and compositions of Al based anode for lithium ion battery before and after discharge
Kelimu Tulugan, SunChul Huh, YongBum Choi, WonJo Park
Poster session & Lunch time
Chair: Kelimu Tulugan,
15:0015:20
C205
15:2015:40
C206
15:4016:00
C207
16:0016:20
C208
19:00
Co-Chair: Min-Soo Suh
(Invited Talk) Fatigue and material characteristics of a hot-formed AZ31 magnesium alloy
Chang Min Suh, Kwang Ho Hor, Min Soo Suh, Seung Hoon Nahm
Erosion resistance and degradation mechanism of SiC/SiC composites
Min-Soo Suh, Chang-Min Suh, Tatsuya Hinoki, Akira Kohyama, Se-Young Kim, In-Sub Han
Experimental investigation on the behavior of hollow GFRP pipes subjected to transverse impact
D. X. Xiong, T. Y. Wang, J. Y. Richard Liew
Analysis of the hot deformation behavior of 40CrMo8 alloy for the large-solid-type crankshafts
Sang Kyun Oh, Rag Gyu Lee, Yun-Chul Jung, Jae Gyu Yang, Young Suk Kim
Banquet
July 20
Chair: Jun-Cai Sun
09:3010:00
Plenary speech 5 : Prof. Ri-ichi Murakami, National Taiwan University of Science and
Technology, Taiwan
Title : Effect of spacer layer on enhancement and quenching of photoluminescence by surface plasmon
Plenary speech 6 : Prof. Mahendra A. More, University of Pune, India
Title : Carbon based nanostructures and nanocomposites as supercapacitors: a brief review
10:0010:30
Plenary speech 7 : Prof, Yun-Hae Kim, KMOU, Korea
Title : Application of composite materials to the maritime and ocean
09:0009:30
Chair: Hansang Kwon,
10:5011:10
C301
11:1011:30
C302
11:3011:50
C303
11:5012:10
C304
12:3013:00
Co-Chair: Kwon Hoo Kim
Mechanical performance of carbon nanotube-reinforced nanocomposites
Hansang Kwon, Marc Leparoux, Kwangil Hwang, Junho Choi, Kwonhoo Kim
Texture formation behaviors in AZ80 magnesium alloy during high-temperature plane strain compression
Kwon Hoo Kim, Jun Ho Choi, Kwang Il Hwang, Han Sang Kwon, Kazuto Okayasu, Hiroshi Fukutomi
Template Synthesis of Hollow CopperMicrocagesand their Surface-Enhanced Raman Scattering Activity
Chuncai Kong, Shaodong Sun, Zhimao Yang
Closing ceremony