EE/2015-16/21/270/
NOTICE FOR INVITING QUOTATION
Dt. 09.12.2015
COURIER
To,
Dear Sir(s),
The wax sealed/tempers proof quotations are invited on percentage rate basis from NITIE empanelled contractors for
the following work on behalf of Director, NITIE Mumbai – 87. The complete quotation documents should reach on
or before the date and time of submission. Without wax sealed quotation will be summarily rejected.
Name of work
: Creation of Kitchen Facilities at Taylor Hall (Civil Work )
Estimated cost of work put to : Rs.4,90,436.21
quotation
: Rs.9,810.00 (Pay order or DD to be attached in
Earnest Money Deposit
favour of "NITIE,Mumbai - 87)
: One month.
Period of contract
: 22.12.2015 up to 10.00 A.M.
Last date of submission of quotation
: Quotation Box kept in front of the office of Controller
Place of submission of quotation
of Examination, Admn. Building, NITIE.
: 22.12.2015 at 11.30 A.M.
Date of opening of quotation
: 1% water consuming items.
Water will be supplied at
: 90 days from date of submission
Validity
NITIE reserves the right to reject any or all quotation without assigning any reason thereof. This notice is
also available on web-site : www.nitie.edu.
Thanking you,
Yours faithfully,
EXECUTIVE ENGINEER
CC: Prof. In-charge (E)/ DR (A &A)/CPSC
NITIE/IIT Notice Board/CPP Portal
NITIE, MUMBAI: 87
SCHEDULE
Name of work: Creation of Kitchen Facilities at Taylor (Civil work).
Sr.
no.
Item
Qty
Unit
Rate
(Rs.)
Amount
(Rs.)
M2
697.60
1,39,520.00
M2
670.10
3,350.50
M2
221.15
5,528.75
M2
623.05
9,345.75
M2
54.95
1,373.75
A) Civil work :1
2
3
4
5
Providing and fixing the plain ceramic tiles of
size 300 mm x 200 mm and above 5 to 6 mm
thick for dado and skirting in required position
200.00
fixed on plaster of cement mortar 1:4 ,neat
cement paste, filling joints with neat cement
slurry, curing and cleaning complete.
Providing and laying the plain ceramic tiles of
size 300 mm x 300 mm and above 6 to 8 mm
thick for flooring in required position laid on bed
5.00
of cement mortar 1:4, neat cement paste, filling
joints with neat cement slurry, curing and
cleaning complete.
Providing internal cement plaster of
12 mm
thick in single coat in cement mortar 1:4
without neeru finish to concrete or brick surfaces 25.00
in all positions i/c scaffolding and curing
complete (for old work only).
Providing sand face plaster externally to
concrete, stone or brick surfaces using approved
screened sand including preparing the base,
watering and applying base coat of 15 mm thick
in cement mortar 1:4 using Super corn – 100 as
melamine based super plastizer 1% by weight of
cement, krifib synthetic fiber a additions at 125
gm per bag of cement and Sufumex – 100D of
Krishna Conchem Products i.e. Natural 15.00
Amorphous microselliceours admixture @ 2%
by weight of cement curing the same for not less
than two days and keeping the surface of base
coat rough to receive the sand faced treatment
not to exceed 8 mm thickness in cement mortar
1:4 and finishing the surface by taking out grains
and curing for 14 days and scaffolding etc
complete.
Providing neeru finish to plastered surfaces in
all positions including scaffolding and curing 25.00
complete.
6
7
8
9
10
11
Providing water proof plaster in WC and bath 12
mm thick for dado in cement mortar 1:3 with
neat finishing, floating using waterproofing
100.00
compound @ 1kg/bag of cement of approved
make and manufacturer and curing etc.
complete. (Excluding tiles)
Providing waterproof bedding 25 mm thick for
flooring of bath and W.C in cement mortar 1:3
with neat finishing ,floating using 1kg of
30.00
waterproofing compound of approved make and
manufacturer per bag of cement including
leveling and curing etc. complete .
Providing water proof plaster in WC and bath i/c
brick bat coba in all positions i/c providing and
laying 12 mm bedding in cement mortar 1:3 on
vergin concrete slab with waterproofing
compound @ 1kg/bag of cement laying brick
bat coba of required thickness in cm 1:5 with
water proofing compound @1 kg/bag of cement
grouting and finishing the top layer with 20 mm 8.00
thick brick bedding in cm mortar 1:3 with water
proofing compound 1kg/ per bag of cement and
testing the treated portion for 48 hrs by pond test
and covering 10 year’s guarantee on requisite
stamp paper including all leads , lifts and curing
etc. complete.
Providing and applying one priming coat on
plastered surfaces i/c preparing the surface by
thoroughly cleaning oil, grease, dirt and other 100.00
foreign matter with wire brushing, fine fire steel
wool, and sand paper, scaffolding etc. complete.
Providing and applying Washable Oil bound
distemper of approved quality colour and shade
to old/new plastered surfaces in two coats i/c
100.00
scaffolding, preparing the surfaces to receive the
paint and applying putty (excluding primer coat)
complete.
Providing and laying polished Kotah stone
flooring of approved quality 25 mm to 30 mm
thick and having size not less than 55 cm x 55
cm in plain pattern laid on a bed of cement 25.00
mortar 1:6 i/c cement float, filling joints with
neat cement slurry, curing, polishing and
cleaning complete.
M2
255.75
25,575.00
M2
484.00
14,520.00
Cum
4,727.30
37,818.40
M2
26.00
2,600.00
M2
50.05
5,005.00
M2
969.10
24,227.50
12
13
14
15
16
17
18
19
Providing and constructing Kitchen platform in
Granite slab of approved type and design with
0.60 meter wide and of 0.75 meter height with
Kadappa supports. The gaping between supports
to be filled with cement mortar 40 mm thick
kadappa below granite top and all vertical
kadappa support i/c front granite Patti supports
finished with the granite top on it. (without sink)
Providing and Sink fixing Steel of size
60x45x25 cm to the kitchen platform i/c UPVC
waste coupling pipe and coupling, making good
the damaged surface etc. complete.
Providing and fixing Kadappa stone slab for
Kitchen platform of approved type and design 30
mm to 40 mm thick in cement mortar 1:4 i/c
providing and fixing border Patti on front edges,
filling joints, curing and cleaning etc. complete.
3.00
Rmt.
2,645.30
7,935.90
3.00
No.
4,932.35
14,797.05
30.00
M2
1,013.20
30,396.00
Cum
7,978.30
39,891.50
M2
1,021.20
15,318.00
Rmt.
128.00
1,536.00
Rmt.
155.00
3,410.00
Rmt.
345.00
7,590.00
Providing second class Burnt brick masonry
with conventional/I.S. type brick in cement
mortar 1:6 in superstructure as backing in 5.00
composite masonry including scaffolding,
racking out joints and watering etc. complete.
Providing second class burnt brick masonry
with conventional/IS type bricks in cement
mortar 1:4 in half brick thick wall including
mild steel longitudinal steel reinforcement of 2
bars of 6 mm dia./2 hoop iron strips 25mm x 1.6
mm at every third course properly bent and 15.00
bonded at ends, scaffolding, racking out joints
and watering etc. complete.
Providing and fixing leak proof and frost proof
ASTMD (UPVC) Pipes of 15 mm dia. having
a wall thickness 3.73 mm schedule 80 pipes
12.00
(pressure rating) for normal water supply and
painting the pipe in white oil paint etc. complete.
(It. No. 87 (a) Pg. no. 165)
Providing and fixing leak proof and frost proof
ASTMD (UPVC) Pipes of 20 mm dia having a
wall thickness 3.91 mm schedule 80 pipes 22.00
(pressure rating) for normal water supply and
painting the pipe in white oil paint etc. complete.
Providing and fixing leak proof and frost proof
ASTMD (UPVC) Pipes of 50 mm dia having 22.00
a wall thickness 5.54 mm schedule 80 pipes
20
21
22
23
24
25
26
(pressure rating) for normal water supply and
painting the pipe in white oil paint etc. complete.
Providing and fixing 15mm diameter Standard
Bib cock PVC polymer scratch resistant, antistatic with guarantee against any manufacturing
defect i/c socket, union nuts etc. complete.
(Spec. As directed by Engineer in-charge)
Providing and fixing 15mm diameter Standard
Stop cock (Male threaded) PVC polymer
scratch resistant, anti-static with guarantee
against any manufacturing defect i/c socket,
union nuts etc. complete.
(Spec. As directed by Engineer in-charge)
Providing and fixing 15mm diameter Piller
cock PVC polymer scratch resistant, anti-static
with guarantee against any manufacturing defect
i/c socket, union nuts etc. complete.
(Spec. As directed by Engineer in-charge)
Providing and fixing 15mm diameter Angle
cock with flange PVC polymer scratch resistant,
anti-static with guarantee against any
manufacturing defect i/c socket, union nuts etc.
complete.
(Spec. As directed by Engineer in-charge)
Providing and fixing 15cm x 10 cm salt glazed
Stone ware Gully trap in cement concrete 1:4:8
outside the building i/c connecting to salt glazed
stone ware pipe, brick masonry chamber with
cast iron lid grating for the gully trap etc.
complete as directed.
Providing and fixing 10 cm PVC Nahani Trap
fixed with PVC grating, PVC plug bend and
piece of PVC pipe upto plug bend, scaffolding
etc. complete.
Providing and fixing PVC Soil (Waste water
pipes of 110mm diameter and having wall
thickness of 3.2 to 3.8 mm confirming to IS
13592-1992including PVC plug band, necessary
fittings such as bend, tees, single junction,
double junction, slotted vent offsets on walls or
in the ground including fixing the pipe on wall
using approved wooden cleats projecting 25mm
to 40mm from face of wall and fixing with clips
of approved quality and number, filling the joints
using rubber gasket with solvent cement
including necessary scaffolding, screwing,
5.00
No.
584.40
2,922.00
5.00
No.
295.15
1,475.75
3.00
No.
414.25
1,242.75
5.00
No.
339.40
1,697.00
3.00
No.
2,256.20
6,768.60
5.00
No.
385.95
1,929.75
15.00
Rmt.
627.75
9,416.25
27
28
29
30
31
cleaning the surface and applying two coats of
oil paint of approved shade and maintenance for
3 years for any leakages or dislocation of pipes.
All the PVC fittings and additional two piece
socket clips and crews shall be got approved
from Engineer in charge etc. complete. (the
contractors shall give 3 years guarantee bond
for payment)
Providing and fixing 32mm diameter Bottle
trap PVC polymer scratch resistant , anti-static
with guarantee against any manufacturing defect
i/c socket, union nuts etc. complete.
Providing and laying in situ plain cement
concrete M-5 of trap metal for foundation and
bedding including bailing out water manually
dewatering, formwork, compacting and curing.
Providing and casting in situ dense and
impervious cement concrete M-20 of trap
metal for R.C.C. Beams and Lintels as per
detailed designs and drawings or as directed
including providing and erecting steel Centering
and shuttering with strutting, propping etc. and
removal of formwork, necessary compaction,
finishing the formed surface with cement mortar
1:3 of sufficient minimum thickness to give a
smooth and even surface or roughening the
surface if special finish is to be provided and
curing, Only steel centering and formwork is
to be used and deviation is allowed. Any
defect, distresses if seen within 25 years
contractor will be held responsible and he will
be liable for compensation of losses due to
distress/defects observed in the structure.
(Excluding steel reinforcement).
Providing and fixing in position T.M.T. bar
reinforcement of various diameters for R.C.C.
pile caps, footings foundation, slabs, beams,
columns, canopies, staircases, newels, chajjas,
lintels, pardies, coping, fins, arches etc. as per
detailed designs, drawings and schedules
including cutting, bending, hooking the bars,
binding with wires or tack welding and
supporting as required complete.
Removing doors and windows of any size and
type with frame mild steel / wrought iron grill
3.00
No.
569.40
1,708.20
0.5
Cum
5,312.90
2,656.45
1.00
Cum.
9,695.80
9,695.80
0.10
MT
71,386.95
7,138.69
3.00
Nos.
185.35
556.05
32
33
34
35
36
37
work and stacking the same in compound or in
NITIE.
Providing and fixing in position extruded
modular alluminium fixed glass panel window
having frame made out of extruded tubular
section of size 63mm x 38mm x 2.00mm
thickness (wt. 1.054 kg/Rmt.) mechanically
assembled at corners with glazing, beading of
angle 25mmx 25mm x 1.60mm thick (wt.0.21
kg/Rmt) including plain sheet glass 5.5 mm thick
with rubber gasket and wooden encashment
wherever necessary etc. as per approved drawing
and specification etc. complete.
Providing and fixing corrugated galvanized
iron sheets of 0.80 mm thickness (22 B.W.G)
for roofing without wind ties including fastening
with galvanized iron screws and bolts and
bitumen washers as per drawings complete.
Providing and fabricating structural steel works
in rolled sections like joist ,channels , angles,
tees etc.as per detailed designs and drawings
including fixing in position with connecting
plates, braces and welding, riveting, bolting as
necessary including painting etc. complete.
Providing and fixing Country Teak wood
frame as per drawing for second class doors,
without ventilators, windows, fanlights etc.
including all mouldings, rebating, holdfasts and
finishing with one coat of primer complete.
Providing and fixing welded mesh of 50 mm x
25 mm and 2.54 mm thick (12 gauge ) to teak
wood frame work as per detailed drawings or as
directed , iron fastenings, one coat of primer,
scaffolding etc. complete. (Frame work of 70
mm x 45 mm and covering battens of 45 x 10
mm to be paid separately) .
Providing and applying one priming coat to
wood and wood based surface including
preparing of the surface by thoroughly cleaning
oil, grease, dirt and foreign matter with wire
brushing, fine fire steel wool, and sand paper,
scaffolding etc. complete.
3.00
M2
3,809.15
11,427.45
15.00
M2
693.60
10,404.00
0.2
M.T
80,723.00
16,144.6
0.1
Cum
118684.20
11,868.42
8.00
Sqm
312.45
2,499.60
5.00
M2
28.00
140.00
38
Providing and applying two coats of synthetic
enamel paint of approved colour to new /old
structural steel work and wood work in buildings
and workshops including scaffolding if
necessary cleaning and preparing surfaces by
solvent, degreasing and derusting by manual
scraping/mechanically by sand blasting/shot
blasting flame cleaning/by chemical methods
complete.(excluding primer coat).
15.00
M2
67.05
Total Amount (A)
We hereby ready to execute the work _______________ % (in
1,005.75
4,90,436.21
words _________________
____________________________________________) .ABOVE / BELOW/ AT PAR on the estimate cost
put to tender inclusive of all taxes. Total Quotation Amount quoted after considering the percentage in
figure Rs. ____________ Total Quotation Amount quoted after considering the percentage in words Rs.
__________________________________________________________
Dt. ____________
_____________
CONTRACTOR
Addresses & Seal
__________________________
EXECUTIVE ENGINEER (I/c)