CURRICULUM VITAE -PRINCIPAL ELECTRICAL ENGINEER
Gayathri.Reddy
gran201995@gmail.com
#88, 6Th Block, 6th Cross,17Th ‘D’Main,
Koramangala layout ,Bangalore-560095.
+91 9902417659
Objective
Years of experience in the field of Electrical engineering: Withover14 years of Electrical engineering
experience in various field of Electrical engineering Design, Procurement assistance ,power system study using
ETAP in EPC experience as a Lead engineer in the field of Engineering consultants for a
variety of successful projects for Oil & Gas, Infrastructure, Industrial installation, Power plants, , Process
plants, Pharma & Food Industrial Project..
Handle responsibilities of designing industrial and utility power substation designupto132/11kV complete
with relay protection scheme.
Skill Profile

Key Engineering Skills :

Electrical System Studies & Calculations: Performing various Power system analyses for Load
flow, Fault Analysis with manual calculations as well as with ETAP, Relay setting. Motor static
acceleration study, Arch Flash study, Performing various calculation including voltage dip and
drop calculation, Lighting calculations, Lightning &Earthing calculations,.

Selection & Sizing of various LT & HT Electrical Equipments : Including Transformer, DG set,
Circuit breaker, Bus duct, CT calculations, All kinds of LV electrical equipments, Battery &
battery charger, UPS system & PF capacitor Banks.

Engineering Documents : Design Basis & Philosophy for electrical system & equipment, Load
List, Motor & Heater Summary, SLD with metering & protection diagrams upto132/11Kv
system & Interlocking system, Schematics, Block diagrams, Cable Schedule, Study & Reports,
Electrical Equipment List, Project Specification, Datasheets & preparation of MTOs.

Engineering Layout Drawings & Standard Installation Details: Preparation of Substation
Equipment & Power Layout, Tray/Rack/Trench/Duct Bank Layout & Sections, Earthing&
Lighting Layout in substation & field & Area classification drawings. Preparation of GA for
panels & Bus ducts etc.

Other Technical Skills : Vendor Drawing Review, Interaction with Clients & Contractors,
Coordination with other disciplines, Interdisciplinary review, Support to Procurement
team/Technical Bid Evaluation(TBE), floating of inquiries, Support to Construction team &
attending Site Engineering Request (SER) & Revising Engineering deliverables in accordance
with SER.

Project crown Philips carbon black ltd, Mundra ,I have involved in power plant(66Kv
switchyard) designing, Load flow & short circuit study using ETAP, Relay Co ordination.

Involve in Designing a Single Line Diagram for 132/11kV,substation lay out designing, Load
flow and short circuit study with ETAP, CT calculations, Battery & battery charger Sizing
calculation, Step and touch Earthing calculation for Cadburys Chocolate manufacturing
(Mondelez Project). P & G layout drawings ,Hazardous area classification drawing. MHCS
schedule, specifications.

Leading role for quotation for bids, bid analysis, bid enquiry, Man hour estimation for all
engineering and design activities Detail Engineering activities like specification and data sheets.

Interaction with client and team members and online doubt clarification session

Monitoring the Team efficiency, productivity and project progress.

Involvement in planning and scheduling.

Analyzing the technical problems and risks for better planning to meet the schedules customer
satisfaction.

Ensuring and making the staff to follow the systems and procedures defined by Company
according to the standards of ISO.

Assigning tasks, target settings , Training the team members as per project requirement .
Keeping the track of the production consistency.


Attention to detail with excellent communication and project management skills
3D modeling review.
Professional Experience
Organization : VALDEL ENGINEERS & CONSTRUCTORS Pvt. Ltd., Bangalore
Duration
: Aug 2014 - Till date.
Position
: Principal Electrical Engineer
Tasks handled : Lead Engineer
Projects:


Sulphur Recovery Unit in Russia,
HD5 Propane stripper in Houston.
Responsibilities:
Functioning as Lead Electrical Engineer, responsible for preparing MRs for
electrical items, checking of electrical layout activities and deliverables, review of
PDS 3D model for correctness of design, preparation / review of other electrical
deliverables like system study (ETAP) for Load flow, SC, Motor acceleration study, relay co ordination,
Arc Flash study, cable tray fill sizing calculation, Photometric calculation, Preparing up of Single line
diagrams, Motor Schematics, Power layout, Equipment Layout, Hazardous area classification layout
,Cable / Cabling Layout, Lighting, Grounding layout & Lighting calculation. Coordination with other
disciplines and project manager, as well as inter-discipline check (squad check) of other discipline
documents like equipment layouts and piping arrangements. Providing inputs to other discipline MR for
example Mechanical MR for Electrical Heaters, Motors,
package equipment and the like.
Organization : M+W Group,., Bangalore.
Duration
: July 2012 - July 2014.
Position
: Senior Electrical Engineer
Projects:

Detailed Engineering for Cadburys Chocolate manufacturing (Mondelez Project) with .
132/11kv Substation design

GSK – Glaxo smith kline – Pharma Project (Lead Engineer)

Chemicals: Jotun Paint (Paint Manufacturing Facility), Nilai, Malaysia
Responsibilities:
Functioning as Lead Electrical Engineer, responsible for preparing MRs for
electrical items, MTO preparation, checking of electrical layout activities and deliverables, review of
PDS 3D model for correctness of design, preparation / review of other electrical
deliverables like system study (ETAP), cable tray fill sizing calculation,
Photometric calculation, Preparing up of Single line diagrams, Motor Schematics,
Power layout, Equipment Layout, Hazardous area classification layout ,Cable / Cabling Layout,
Lighting, Grounding layout & Lighting calculation. Coordination with other disciplines and project
manager, as well as inter-discipline check (squad check) of other discipline
documents like equipment layouts and piping arrangements. Providing inputs to
other discipline MR for example Mechanical MR for Electrical Heaters, Motors,
package equipment and the like.
Organization : Sidvin Core-Tech (I) Pvt. Ltd.., Bangalore.
Duration
: June 2010 – July 2012 .
Position
: Senior Electrical Engineer
Tasks handled : Lead Engineer
Projects:

Detailed Engineering for FPSO Baleia Azul SBM Atlantia.

Detailed Engineering for FPSO Cidade De Paraty SBM Switzerland

Micro Engineering for FPSO Cidade De Paraty SBM Switzerland

Detailed Engineering for Turret BP QUAD 204
Responsibilities:

Checking of electrical layout activities and deliverables, review of
PDS 3D model for correctness of design.

Preparation/review of electrical deliverables like Cable sizing calculations, single line diagrams,
cable schedule, Equipment list, cable tray layout, Power layouts, earthing layouts. Lighting
layout calculation software’s and validated Excel sheets. Plot plans, Preparation of Area
Classification Drawings for Hazardous areas, BOM. Terminationdiagram,
Vendor document review. Equipment layouts.

Assigning a project related jobs/works to subordinates and giving
guidance/training to them during job.

Coordination with other disciplines and interaction with International client for
Design Co-Ordination.

Leading role for quotation for bids, bid analysis, bid enquiry, Man hour estimation for all
engineering and design activities Detail Engineering activities like specification and data sheets.

Involvement in planning and scheduling.

Monitoring the Team efficiency, productivity and project progress.

Assigning tasks, target settings , Training the team members as per project requirement .
Keeping the track of the production consistency.
Scheduled the project, Documentation, Involved in project set-up, responsible for production
process and Quality Control related activities, design/drafting conversion Process, Providing
Technical Assistance.

Organization : CHEMTEX Consulting Engineers of India (P) Ltd., Bangalore , India
Duration
: Jan 2008 - June 2010.
Position
: Engineer (Electrical)
Tasks handled : Sub Lead Engineer
Lead Engineer
Projects:
Industrial & water treatment plants : Sewage Treatment, Doha.
Oil & Gas Sector :



SENGKANG L & G Project Indonesia with 110/11kv Substation design.
Crown Philips carbon black ltd, Mundra
Process Plant : Torula 100 TPD Plant for Thor project , Portuguese.
Responsibilities:

Preparation of Electrical Design Basis Report (DBR) for Plant Electrical system.

Performing manual calculations for Short circuit study & Load flow to check
with the ETAP study.

HV & LV cable sizing and scheduling, MV & LV switchgear sizing , Lighting
calculations, Lightning & Earthing calculations ,CT calculations, All kinds of
LV electrical equipments, Battery & battery charger, UPS system & PF
capacitor Banks, etc.

Preparation of Electrical Load List, Overall and Detailed Single Line Diagrams
for Switchgear, PCCs, PMCCs & MCCs. Designing of protection of protection &
control schemes including interlocks.

Preparation of Area Classification Drawings for Hazardous areas in the Process
plants.

Lighting, Earthing, Cable tray & power layout design.

Preparation of Technical specification with data sheets for all electrical
equipments & Schedule for cables, Panels & other vendor equipments.
Technical specification write-ups and technical evaluation of the suppliers for
station service MV & LV switchgears, Transformers, MCC’s, Panel boards,
Grounding & Lightning, Standby power and UPS systems.


Preparation of Electrical underground layout drawings for cable trench &
Earthing Layout.

Preparation of Electrical above ground layout drawings for cable racks & trays.

Preparation of Building Electrical layout Drawings for substation equipments,
power layout.

Preparation of Lighting layout Drawings for Indoor & outdoor lighting.

BOM & Coordination with other disciplines.

Assigning a project related jobs/works to subordinates and giving
guidance/training to them during job.

BOM & Coordination with other disciplines.

Designing, Technical specification and preparing Bill of Material for Telephone,
Networking ,Fire detection and Public Address system.

Coordination with other disciplines and interaction with International client for
Design Co-Ordination.

Leading role for quotation for bids, bid analysis, bid enquiry, Man hour
estimation for all engineering and design activities Detail Engineering activities like
specification and data sheets.

Undertaking tender process-issuing through to clarification, adjudication,
recommendation and contract award.

Technical clarifications and design review with the suppliers for above named
equipment, to assure compliance with the design requirements.

Client/Contractor liaisons, coordinate all the necessary technical requirements of
the project in all aspects (engineering, documentation, detail design, data
requirements, etc.)
Organization
Duration
Position
Tasks handled
: Spectral Service Consultants Pvt Ltd, Bangalore..
: Dec 2005 - Jan 2008.
: Project Manager
: Lead Engineer
Projects:

M/s Taj Hotel in Yeshwanthpur.(5 Star hotel with 360 Guest rooms)

M/s. VDO India limited.

M/s.PK Engineering & Mfg.

M/s. Vista Chemical.

M/s. Velankani Hotel

M/s,RMZGalaria - 66/11KV Substation.

M/s, DensoKirloskarnearNelamangala Bangalore

M/s.ITC Factory, Uttaranchal & Pune
Responsibilities:

Preparing of Transformer Sizing, DG Set Sizing, UPS Sizing.

Preparing Engineering calculations for Power, Lighting, Short circuit study, Voltage drop
calculations.

Preparing of SLDs & panel layout designs, Cable tray layouts, Grounding Layouts, Power and
Control cable layouts, Selection and Sizing of switchgear, Generating Bill of Materials.

Selection and Inspection of Vendor equipments.

Site supervision and modification of design as per site condition.

Project Budgeting / Estimating.

Feasibility / Site Selection / Relocation Analysis.

Co-ordination with all other services, Bill certification.

Involved in specification/system study during tendering stage of the project with marketing
team and preparing of tender drawings and design documents.

Preparation of Area Classification Drawings for Hazardous areas for HSD tanks,Hot water
Generator, Steam boilers and other areas relevent to Fire Hazardous and co-ordinate with Third
party to avail certificate as per Petroleum rules.

Preparing of Basic & Detailed Engineering and Technical Specification, Schedules for cables,
panels
Organization : Engineering Resources Group., Bangalore,
Duration
: June 2003-Dec 2005
Position
: Project Engineer
Projects:

M/s Symbol Technology.

M/s. Altech Enzymes Pvt Ltd(Process plant)

M/s. Featherlite Products Pvt Ltd.(Industrial Project)

M/s. Bamboo shoot Food processing Ltd. (Process plant)

M/s. Steel manufacturing Ltd for BRDR JENSON(Industrial Project)

M/s. Baxter Pharmaceutical Ltd.(Industrial Project)

M/s. Infopro Solution at white field.

EXIDE Batteries(Chemical power plant)
Organization : DEG Consultants., Bangalore,
Duration
: March 1999 – June 2003
Position
: Electrical Design Engineer
Projects:

M/s Bharathi Telesonic

M/s Network Associates (Phase I,II,III)

M/s Ocwan

M/s Delphi

M/s Agere system

IBM

M/s Printing Press (Industrial Project)

M/s Sigma Information Technology

M/s Thomson Pinnacle

M/s Loctite India Ltd. (Industrial Project)
Responsibilities:
In charge of the project from the basic design, co-ordination with instrumentation and Mechanical services and
interaction with clients, study of the project, including KPTCL approval and regulation. Make bill of quantities,
and prepare LOAD Details, Cable scheduling, cable routing at all stages using appropriate switchgear and cables
depending on the type of project.
Lighting design in false ceiling in co-ordination with A\C layout, and routing of cables\cable tray\trenching,
power distribution, PC’s and other electronic devices, power panel design.
Organization
Duration
Position
: G TEAM (P) Ltd., Bangalore,
: Sept 1997 -March 1999
: Quality and Production Engineer
Organization : Graduate Apprentice Training in N.G.E.F, Bangalore..
Duration
Position
: July 92 - June 1993.
: Trainee Engineer
My Strengths





Can handle responsibilities with ease.
Ambitious & working under pressure.
Time conserved person & goal oriented.
Adaptive & flexible.
Self motivated& a keen learner.
Personal Details:
Qualification
:
B.E in Electrical Engineering
Institution
:
B.I.T, Bangalore University from 1986-1991.
Marital Status
:
Permanent Address
:
Qualification
:
Married
#88, 6Th Block, 6th Cross,17Th ‘D’Main,
Koramangala layout ,Bangalore-560095.
B.E in Electrical Engineering
Languages:
Language
Speaking
Reading
Writing
Kannada
English
Hindi
Telugu
Tamil
Excellent
Excellent
Good
Good
Good
Excellent
Excellent
Fair
Fair
poor
Excellent
Excellent
poor
Poor
Poor
DECLARATION:
I hereby declare that all the information furnished herein is true to the best of my knowledge without any
consequential omissions whatsoever.
Place: Bangalore
Date :
(Gayathri.Reddy)