3D Printing Request
Printing cost is $0.35 per gram
Instructions: Please complete this form and e-mail it along with the 3D object file (file format: .STL) to
melrose@ocls.info.
Date: Click here to enter text.
Name: Click here to enter text.
Library Card Number: Click here to enter text.
Email: Click here to enter text.
Attach File:
Choose Infill:
Click here to enter text.
Infill is the density of the object, and is measured in percentage. An infill of 0 will be hollow, and an infill of
100 will be completely solid. Recommended: 10%
Choose Shells:
Click here to enter text.
Shells define the thickness of the perimeter of your object. If you set shells to 1, the walls will be 1 layer
thick (approximately .4mm), and if you set the shells to 3, the walls will be 3 layers thick. Recommended: 2
Describe the object and give any additional information.
Click here to enter text.
I agree to abide by OCLS 3D Printing Policy.
OCLS 3D Printing Policy









The person requesting the 3D Print is 18 years or older.
It is the responsibility of each person to uphold US Copyright Laws.
The Orange County Library System reserves the right to refuse to scan or print any object for any
reason.
The library refuses to print guns, gun parts or weapons of any kind.
The library refuses to print any objects that are inappropriate to a library environment.
The Orange County Library System is not responsible for any loss, damage or security of files
submitted for printing.
The Orange County Library System is not responsible for the quality of the print job. Printing
costs are non-refundable.
3D printed items will be held for one week only. Files will be deleted immediately after printing.
One print job per day up to 60 minutes of printing. Limit: 3 print jobs per week.