References and Bibliography
than options. TolFun and maximum constraint violation
is less
than options.TolCon.
Active inequalities (to within options.TolCon = 1e-006):
lower upper ineqlin ineqnonlin
1
2
x=
5.4510 0.2920
fval =
26.5310
The values of constraints at optimum solution
c=
-0.0000
-0.0000
-3.4510
-8.5490
-0.0920
-0.5080
ceq =
[]
REFERENCES AND BIBLIOGRAPHY
Structural Optimization
1.1
K. I. Majid, Optimum Design of Structures, Wiley, New York, 1974.
1.2
D. G. Carmichael, Structural Modelling and Optimization, Ellis Horwood, Chichester,
UK, 1981.
1.3
U. Kirsch, Optimum Structural Design, McGraw-Hill, New York, 1981.
1.4
A. J. Morris, Foundations of Structural Optimization, Wiley, New York, 1982.
1.5
J. Farkas, Optimum Design of Metal Structures, Ellis Horwood, Chichester, UK, 1984.
1.6
R. T. Haftka and Z. G¨urdal, Elements of Structural Optimization, 3rd ed., Kluwer Academic Publishers, Dordrecht, The Netherlands, 1992.
1.7
M. P. Kamat, Ed., Structural Optimization: Status and Promise, AIAA, Washington,
DC, 1993.
1.8
Z. Gurdal, R. T. Haftka, and P. Hajela, Design and Optimization of Laminated Composite
Materials, Wiley, New York, 1998.
1.9
A. L. Kalamkarov and A. G. Kolpakov, Analysis, Design and Optimization of Composite
Structures, 2nd ed., Wiley, New York, 1997.
Thermal System Optimization
1.10
W. F. Stoecker, Design of Thermal Systems, 3rd ed., McGraw-Hill, New York, 1989.
1.11
S. Stricker, Optimizing Performance of Energy Systems, Battelle Press, New York, 1985.
1.12
Adrian Bejan, G. Tsatsaronis, and M. Moran, Thermal Design and Optimization, Wiley,
New York, 1995.
39
40
Introduction to Optimization
1.13
Y. Jaluria, Design and Optimization of Thermal Systems, 2nd ed., CRC Press, Boca
Raton, FL, 2007.
Chemical and Metallurgical Process Optimization
1.14
W. H. Ray and J. Szekely, Process Optimization with Applications to Metallurgy and
Chemical Engineering, Wiley, New York, 1973.
1.15
T. F. Edgar and D. M. Himmelblau, Optimization of Chemical Processes, McGraw-Hill,
New York, 1988.
1.16
R. Aris, The Optimal Design of Chemical Reactors, a Study in Dynamic Programming,
Academic Press, New York, 1961.
Electronics and Electrical Engineering
1.17
K. W. Cattermole and J. J. O'Reilly, Optimization Methods in Electronics and Communications, Wiley, New York, 1984.
1.18
T. R. Cuthbert, Jr., Optimization Using Personal Computers with Applications to Electrical Networks, Wiley, New York, 1987.
1.19
G. D. Micheli, Synthesis and Optimization of Digital Circuits, McGraw-Hill, New York,
1994.
Mechanical Design
1.20
R. C. Johnson, Optimum Design of Mechanical Elements, Wiley, New York, 1980.
1.21
E. J. Haug and J. S. Arora, Applied Optimal Design: Mechanical and Structural Systems,
Wiley, New York, 1979.
1.22
E. Sevin and W. D. Pilkey, Optimum Shock and Vibration Isolation, Shock and Vibration
Information Center, Washington, DC, 1971.
General Engineering Design
1.23
J. Arora, Introduction to Optimum Design, 2nd ed., Academic Press, San Diego, 2004.
1.24
P. Y. Papalambros and D. J. Wilde, Principles of Optimal Design, Cambridge University
Press, Cambridge, UK, 1988.
1.25
J. N. Siddall, Optimal Engineering Design: Principles and Applications, Marcel Dekker,
New York, 1982.
1.26
S. S. Rao, Optimization: Theory and Applications, 2nd ed., Wiley, New York, 1984.
1.27
G. N. Vanderplaats, Numerical Optimization Techniques for Engineering Design with
Applications, McGraw-Hill, New York, 1984.
1.28
R. L. Fox, Optimization Methods for Engineering Design, Addison-Wesley, Reading,
MA, 1972.
1.29
A. Ravindran, K. M. Ragsdell, and G. V. Reklaitis, Engineering Optimization: Methods
and Applications, 2nd ed., Wiley, New York, 2006.
1.30
D. J. Wilde, Globally Optimal Design, Wiley, New York, 1978.
1.31
T. E. Shoup and F. Mistree, Optimization Methods with Applications for Personal Computers, Prentice-Hall, Englewood Cliffs, NJ, 1987.
1.32
A. D. Belegundu and T. R. Chandrupatla, Optimization Concepts and Applications in
Engineering, Prentice Hall, Upper Saddle River, NJ, 1999.
References and Bibliography
41
General Nonlinear Programming Theory
1.33
S. L. S. Jacoby, J. S. Kowalik, and J. T. Pizzo, Iterative Methods for Nonlinear Optimization Problems, Prentice-Hall, Englewood Cliffs, NJ, 1972.
1.34
L. C. W. Dixon, Nonlinear Optimization: Theory and Algorithms, Birkhauser, Boston,
1980.
1.35
G. S. G. Beveridge and
McGraw-Hill, New York, 1970.
1.36
B. S. Gottfried and J. Weisman, Introduction to Optimization Theory, Prentice-Hall,
Englewood Cliffs, NJ, 1973.
1.37
M. A. Wolfe, Numerical Methods for Unconstrained Optimization, Van Nostrand Reinhold, New York, 1978.
1.38
M. S. Bazaraa and C. M. Shetty, Nonlinear Programming, Wiley, New York, 1979.
1.39
W. I. Zangwill, Nonlinear Programming: A Unified Approach, Prentice-Hall, Englewood
Cliffs, NJ, 1969.
1.40
J. E. Dennis and R. B. Schnabel, Numerical Methods for Unconstrained Optimization
and Nonlinear Equations, Prentice-Hall, Englewood Cliffs, NJ, 1983.
1.41
J. S. Kowalik, Methods for Unconstrained Optimization Problems, American Elsevier,
New York, 1968.
1.42
A. V. Fiacco and G. P. McCormick, Nonlinear Programming: Sequential Unconstrained
Minimization Techniques, Wiley, New York, 1968.
1.43
G. Zoutendijk, Methods of Feasible Directions, Elsevier, Amsterdam, 1960.
1.44
J. Nocedal and S. J. Wright, Numerical Optimization, Springer, New York, 2006.
1.45
R. Fletcher, Practical Methods of Optimization, Vols. 1 and 2, Wiley, Chichester, UK,
1981.
1.46
D. P. Bertsekas, Nonlinear Programming, 2nd ed., Athena Scientific, Nashua, NH,
1999.
1.47
D. G. Luenberger, Linear and Nonlinear Programming, 2nd ed., Kluwer Academic
Publishers, Norwell, MA, 2003.
1.48
A. Antoniou and W-S. Lu, Practical Optimization: Algorithms and Engineering Applications, Springer, Berlin, 2007.
1.49
S. G. Nash and A. Sofer, Linear and Nonlinear Programming, McGraw-Hill, New York,
1996.
R.
S.
Schechter,
Optimization:
Theory
and
Practice,
Computer Programs
1.50
J. L. Kuester and J. H. Mize, Optimization Techniques with Fortran, McGraw-Hill, New
York, 1973.
1.51
H. P. Khunzi, H. G. Tzschach, and C. A. Zehnder, Numerical Methods of Mathematical Optimization with ALGOL and FORTRAN Programs, Academic Press, New York,
1971.
1.52
C. S. Wolfe, Linear Programming with BASIC and FORTRAN , Reston Publishing Co.,
Reston, VA, 1985.
1.53
K. R. Baker, Optimization Modeling with Spreadsheets, Thomson Brooks/Cole, Belmont,
CA, 2006.
1.54
P. Venkataraman, Applied Optimization with MATLAB Programming, Wiley, New York,
2002.
42
Introduction to Optimization
Optimal Control
1.55
D. E. Kirk, Optimal Control Theory: An Introduction, Prentice-Hall, Englewood Cliffs,
NJ, 1970.
1.56
A. P. Sage and C. C. White III, Optimum Systems Control, 2nd ed., Prentice-Hall,
Englewood Cliffs, NJ, 1977.
1.57
B. D. O. Anderson and J. B. Moore, Linear Optimal Control, Prentice-Hall, Englewood
Cliffs, NJ, 1971.
1.58
A. E. Bryson and Y. C. Ho, Applied Optimal Control: Optimization, Estimation, and
Control, Blaisdell, Waltham, MA, 1969.
Geometric Programming
1.59
R. J. Duffin, E. L. Peterson, and C. Zener, Geometric Programming: Theory and Applications, Wiley, New York, 1967.
1.60
C. M. Zener, Engineering Design by Geometric Programming, Wiley, New York, 1971.
1.61
C. S. Beightler and D. T. Phillips, Applied Geometric Programming, Wiley, New York,
1976.
1.62
B-Y. Cao, Fuzzy Geometric Programming, Kluwer Academic, Dordrecht, The Netherlands, 2002.
1.63
A. Paoluzzi, Geometric Programming for Computer-aided Design, Wiley, New York,
2003.
Linear Programming
1.64
G. B. Dantzig, Linear Programming and Extensions, Princeton University Press, Princeton, NJ, 1963.
1.65
S. Vajda, Linear Programming: Algorithms and Applications, Methuen, New York,
1981.
1.66
S. I. Gass, Linear Programming: Methods and Applications, 5th ed., McGraw-Hill, New
York, 1985.
1.67
C. Kim, Introduction to Linear Programming, Holt, Rinehart, & Winston, New York,
1971.
1.68
P. R. Thie, An Introduction to Linear Programming and Game Theory, Wiley, New
York, 1979.
1.69
S. I. Gass, An illustrated Guide to Linear Programming, Dover, New York, 1990.
1.70
K. G. Murty, Linear Programming, Wiley, New York, 1983.
Integer Programming
1.71
T. C. Hu, Integer Programming and Network Flows, Addison-Wesley, Reading, MA,
1982.
1.72
A. Kaufmann and A. H. Labordaere, Integer and Mixed Programming: Theory and
Applications, Academic Press, New York, 1976.
1.73
H. M. Salkin, Integer Programming, Addison-Wesley, Reading, MA, 1975.
1.74
H. A. Taha, Integer Programming: Theory, Applications, and Computations, Academic
Press, New York, 1975.
1.75
A. Schrijver, Theory of Linear and Integer Programming, Wiley, New York, 1998.