Hydraulic CNC Press Brake WC67Y-40T×1250 The Whole Structure

advertisement
Hydraulic CNC Press Brake WC67Y-40T×1250
The Whole Structure of Press Brake:

Totally European design, streamlined looking,Monoblock,Welded steel frame rigid to deflection moment and high tensile
with ST44 A1 material.

ACCURL Press Brake,designed according to the most modern design techniques, are the best product from the
price/performances point of view.

From the structural point of view,the traditional high level standards of ACCURL are not changed and they are now
improved thanks to the numerical analysis techniques (FEM) and statistical research methods (DOE).
1. Hydraulic System:

Adopt integrated hydraulic control system, more reliable and easy for maintenance.Hydraulic system is from Bosch Rexroth,Germany.

All pipes, flange and joint with vibrations proof and leakage proof design and setting .

All seals in cylinder is PARKER from USA,the most famous brand,good quality and high performance

Overload overflow protection is outfitted to hydraulic system,which can assure no leakage,and the oil level can be read or
seen directly.

The hydraulic system is made in compliance with current regulations (Directive 98/37 EC).
2. Electrical System:

Electrical Cabinet under the standard of IP65, Electrical under international CE Standard, safe and reliable, strong anti
interference capability.

Protective fence and the safety interlock to ensure the operation safety. Have a movable single-hand pedal switch,easy to
operate.

Front Side Covers with safety switches, Back light safety guards (Category-4),Foot pedal conforming to CE regulation.
3. Synchro control system:

Patented hydro-mechanical system for exact parallelism and a high repeat accuracy

The worktable adopts the particular design,reducing the crowning distortion amount of lower tool effectively.

Adopt steel torsion bar synchro system,simple in structure and high in accuracy,ensures the parallelism between beams is
used for the synchronism.
4. Ram and Dies:




Up punching dies will be cut into section as the requirement as below
Fractional set:25mm 30mm 40mm 45mm 50mm 125mm 100mm right 100mm left.
The equipped standard Dies, special non-standard mold is available under client's requirement according to real workpiece
situation.
The Machine By E21 NC Control With the point of programming, can automatically adjustable the backgauge size and
bending depth;
5. Backgauge

Standard X-axis travel is 500mm with third gauge step capable of gauging parts up to 600mm with standard back gauge
(most machines)

Back gauge fingers with two gauging steps used one for short and the other for long bending depths.

Back Gauge positioning fingers move along linear bearings with ±0.01 mm. positioning tolerance.

Optional:Estun E210 or Delem DA41 cnc controller auto controls the Backgauge,Bending Angle,together the numbers of
workpieces accurately.
6. ESTUN E21 NC Control System
 The ESTUN E21 control provides a complete solution for conventional press brake applications for 2 axes.
 In view of characteristics of press brakes, photoelectric encoder is equipped to display position of backgauge and dead
block.
 Special functions like one side positioning display and spindle allowance offset
are available to ensure unity for displayed position and actual position of
backgauge.
 Integrated with time replay, soft limit switch and power down position
memorization function, E21 provides a high cost performance.






Main features ESTUN E21 NC:
Position display of backgauge(X-axes) and dead block(Y-axes), resolution in
0.1mm or 0.01mm
Backgauge and Block Control
Control for general AC motors,frequency inverter
Intelligent positioning.
Stock Counter
One key backup / restore of parameters;
7. Press Brake equipment:
8. Safety Systems and Tooling:
9.Technical Specification:
Seri-al No.
Name
Numerical value
40Tx1250
400
Unit
1
2
3
4
5
6
Bending capacity
Table size length-“A”
Distance between uprights-“B”
Throat depth-“D”
Y-axis Slider Stroke -“C”
1250
1050
320
100
mm
mm
mm
mm
7
8
Max open height between table and slider-“E”
Worktable height above the ground-“F”
380
700
mm
mm
9
X -axis Backgauge Range
Travel Range
600
mm
10
Speed of Ram stroke
Max. Speed
High Advance Speed
300
100
mm/sec
mm/sec
Working Speed
High Return Speed
5~15
80
Type
PGP3-63
Nominal flow
Nominal pressure
40
21,5
180
Y160L-4P
ml/r
Mpa
L
Remark
KN
Optional Delem DA41or ESTUN E210 CNC Control Y-axis Angle programming + X axis or of Y+X + Manual R axis
By DA41 CNC Control Y-axis
Angle programming
11
Gear pump
12
13
Oil Tank Capacity
Main motor
14
Power
Rotate speed
External dimensions(L×W×H)
4
1450
1850×1350×2250
KW
r/min
mm
15
Machine weight
3700
Kg
Type
X axis repeat positioning
accuracy: ±0.01mm
1.Ram stroke positioning
accuracy: ±0.01mm
2. Test the bending Angle
accuracy: ± 40’
68#Anti-wear Hydraulic Oil
380V/ 50 Hz,3PH
10.Standard Accessories:
Serial
No.
1
2
3
4
5
Name
Brief instruction/ Orignal
Orignal
Hydraulic Pump Motor
Electric Units
CNC System
Hydraulic Cylinders
Gasket ring
Siemens Electrical
Schneider Electrical
Delem DA41 from Holland
OILGEAR (be according ISO 6431)
PARKER from U.S.A
http://www.Siemens.com
http://www.schneider-electric.com
http://www.Delem.com
http://www.tfyy.cn
U.S.A
6
7
8
9
10
11
12
13
14
15
Hydraulic Solenoid valve
Hydraulic Manifold
Filter
Rolling bearing
Tubing connector
Control button
Limit switch
Servo motor/ Servo drive
Ball screw/ Liner guide
Mobile type foot switch
Germany Bosch – Rexroth
TAI COLN from Taiwan
LEEMIN from Taiwan
SKF, NSK, FAG or INA from Germany
EMB Products from Germany
Schneider Electrical
Schneider Electrical
ESTUN or Japan YASKAWA
Rexroth/star from Germany
South Korea Kacon l
http://www.boschrexroth.com
http://www.taicoln.com
http://www.leemin.com.cn/en/
Germany
http://www.schneider-electric.com
http://www.schneider-electric.com
http://www.yaskawa.com
Top brand of Linear products
Korea Kacon
11.Accessories and Spares:
First 01 years spares
1Instruction Manual (Mechanical)
2Instruction Manual (Electrical)
3
Quality Certificate
4Control System Documents
5Disk on Parameters
6Tools for machine installation and maintenance
7Combined washers
8Mobile type foot switch
9Adjusting bolts
10Front support
11Backgauge stop finger
12
Working environment
Quantity
In English
In English
1
In English
In English
1 set
8 set
4 set
4 set
1.Power : 380±10%,50HZ
2 .Ambient temperature 5~40℃(working temperature)
3 .Ambient humidity: 20~80%RH
4. Far from strong shaking and electromagnetism
5 .No harmful gas and no corrosive gas and dirt-free
6 .Conforms to the disposition of the machine directive (directive 89/392 CEE), and following amendments (directive 91/368/CEE, 93/44/CEE, 93/68/CEE);
7 . Conforms to the disposition of the following other directives: directive low voltage (73/23/CEE) / electromagnetic compatibility (89/336/CEE).
8. The entire equipment be totally security (according to EN292:1994, EN60204:1994 and NR12) and defined as Level 4 of safety.
Download