ADDITIONAL CONSTRUCTION OF BRANCH BUILDING AT BHEL ,
RAMACHANDRAPURAM , MEDAK DISTRICT
STATE BANK OF HYDERABAD
PREMISES DEPT, 2ND FLOOR,
HYBANK TOWERS, GUNFOUNDRY,
HYDERABAD-500001
TENDER SCHEDULE
Part II - PRICE BID
CONSULTANTS:
SUNNY ASSOCIATES
1-8-703/7 TO 9/1, 2ND FLOOR, ADJ. SHANKARMUTT NALLAKUNTA, HYDERABAD -500044
9390606628
The Deputy General Manager, Premises Department,
STATE BANK OF HYDERABAD,
2nd Floor, Methodist Complex,
ABIDS,
HYDERABAD 500001
SCHEDULE OF QUANTITIES FOR ADDITIONAL CONSTRUCTION OF BRANCH BUILDING AT
BHEL, RAMACHANDRAPURAM, MEDAK DISTRICT
Sl.N
o
1
Item
Anti Termite Treatment
Unit
Qty
Sqm
335.00
Cu
m
285.00
Cu
m
307.00
Providing Ant termite treatment as per IS 6315
(Part - 2) 2001 (Pre-constructional chemical
treatment measures) along the internal & external
vertical faces of the columns, plinth beams,
basement and top surface of the basement filling
below flooring bed as per the specified procedure
conforming to IS 6315 (Part-2) 2001 and other
relevant approved specification duly using
Chlorpyriphos/ Lindane emulsifiable concentrate
20% with 1% concentration @ 7.5 Liters/ sqm of
the vertical surface & @ 5.0 Liters/ sqm of the
horizontal surface of the substructure to a depth of
500 mm around columns & 300 mm deep around
plinth beams, basements & floor filling area
including excavation channel along the wall &
rodding etc & cost & conveyance of all materials to
the site, cost of labour for spraying, rodding etc
and Overheads & Contractors profit complete for
finished item of work as per the approval of the
Engineer-in-Charge. Measurement will be paid as
per Plinth Area The agency shall be PCAI member
with minimum of 10 years experience and shall
give guarantee in the prescribed proforma annexed
in the tender document. (only floor area
measurements would be considered)
2
Earth Work in excavation
Earth work in excavation for foundations for
buildings in all types of soils and depositing on the
bank for all lifts and with an initial lead of 10.0 m
upto a depth of 3.0 including all operational,
incidental, labour charges such as shoring,
sheeting, planking. Strutting, over heads etc.,
including all for the complete finished item of work.
3
Filling with good earth
Filling with available good earth and carted gravel
from out side in trenches,sides of foundations and
basement for all leads in layers not exceeding
15cm thick, watering and ramming including cost
and conveyance of water & Gravel to work site and
all operational, incidental, labor charges,seignorage
charges hire charges of T&P , including cutting,
loading,
unloading,
Consolidation
Charges,
Compaction Factor,watering etc., complete for
fnished item of work
Rate
Amount
4
Concrete Works
a
PCC 1:4:8
Plain Cement Concrete
(1:4:8) (cement: fine
aggregate: Coarse aggregate) for foundations and
under flooring bed using coarse aggregate 40mm
size
hard , machine crushed
granite from
approved quarry including cost and conveyance of
all materials like cement, sand, coarse aggregate,
water etc. to site, including seigniorage charges,
sales & other taxes on all materials and including
all charges for machine mixing, laying concrete in
foundations and under flooring bed, ramming in 15
cm layers finishing top surface to the required level
curing etc., and Overheads & Contractors profit
complete for finished item of work including curing.
b
RCC 1:2:4
Supply and placing of the Design Mix Concrete M
15 grade corresponding to IS 456 with minimum
cement content of 320kgs per 1 cum of concrete
(any plus or minus variation in the cement
consumption as per mix design is allowed) using
WEIGH BATCHER / MIXER with 20mm size
graded machine crushed hard granite metal
(coarse aggregate) ( consisting of nominal size
metal 60% of 20mm, 15% of 13.20/12.50mm, 15%
of 10mm and 10% of 6mm ) from approved quarry
including cost and conveyance of all materials like
cement, fine aggregate (sand) coarse aggregate,
water etc., to site and including Seigniorage
charges, sales & other taxes on all materials,
excluding centering and shuttering but including all
operational, incidental and labour charges such as
weigh batching, machine mixing, laying concrete,
curing etc.,and Overheads & Contractors profit
complete but excluding cost of steel and its
fabrication charges for finished item of work for the
following works
(i)
Locker Room flooring
(ii)
Locker Room RCC walls
c
M 20 grade Concrete
Cu
m
Cu
m
Cu
m
74.00
16.75
35.00
Supply and placing of the Design Mix Concrete M
20 grade corresponding to IS 456 with minimum
cement content of 340kgs per 1 cum of concrete
(any plus or minus variation in the cement
consumption as per mix design is allowed) using
WEIGH BATCHER / MIXER with 20mm size
graded machine crushed hard granite metal
(coarse aggregate) ( consisting of nominal size
metal 60% of 20mm, 15% of 13.20/12.50mm, 15%
of 10mm and 10% of 6mm ) from approved quarry
including cost and conveyance of all materials like
cement, fine aggregate (sand) coarse aggregate,
water etc., to site and including Seigniorage
charges, sales & other taxes on all materials,
excluding centering and shuttering but including all
operational, incidental and labour charges such as
weigh batching, machine mixing, laying concrete,
curing etc.,and Overheads & Contractors profit
complete but excluding cost of steel and its
fabrication charges for finished item of work for the
following
(i)
For footings under colums and RCC walls
(ii)
For Pedestals
(iii)
Plinth beams
(iv)
Columns
(v)
Roof beam
(vi)
Roof Slab
(vii)
Lintels & Bresummers
d
Chajjas
Cu
m
Cu
m
Cu
m
Cu
m
Cu
m
Cu
m
Cu
m
Sqm
46.00
8.50
19.00
10.00
42.00
44.00
1.00
13.00
Supply and placing of the Design Mix Concrete M
20 grade corresponding to IS 456 with minimum
cement content of 340kgs per 1 cum of concrete
(any plus or minus variation in the cement
consumption as per mix design is allowed) using
WEIGH BATCHER / MIXER with 20mm size
graded machine crushed hard granite metal
(coarse aggregate) ( consisting of nominal size
metal 60% of 20mm, 15% of 13.20/12.50mm, 15%
of 10mm and 10% of 6mm ) from approved quarry
including cost and conveyance of all materials like
cement, fine aggregate (sand) coarse aggregate,
water etc., to site and including Seigniorage
charges, sales & other taxes on all materials,
centering using Steel scaffolding pipes, jack props,
wallers, Foot plates, brackets, steel centering
plates etc., & all operational, incidental and labour
charges such as weigh batching, machine mixing,
laying concrete, curing, 12 mm thick plastering etc.,
and Overheads & Contractors profit complete and
also including cost of steel and its fabrication
charges for finished item of work.
5
Masonary Works
a
CRS Masonary
Coursed Rubble Stone masonry in CM (1:6) prop:
(Cement: Sand) 2nd sort using hard granite stones
carted from approved quarry including cost and
conveyance of all materials like cement, sand,
water, stones etc., from approved quarry, to site
and including seigniorage charges, sales & other
taxes on all materials including bond stone of 24 x
24 x 39 cm, labour for cutting stones to required
size and shape, mixing, of cement, mortar,
construction,
curing etc., and Overheads &
Contractors profit complete for finished item of
work in foundation and basement.
b
230 thk. Brick Work
Cu
m
48.00
Cu
m
51.00
Sqm
18.00
First Class brick work in CM 1:6 in super structure
for 230 mm thk walls including cost & conveyance
of all materials, labour charges, seigniorage
charges, scaffolding and curing etc., and
Overheads & Contractors profit all complete
c
115 thk. Brick wall
-do- as 230 thk. brick work but for 115 thk. brick
wall
6
Plastering
a
RCC Works (internal & external works)
Plastering both internal and external to Verticals
and ceiling for walls, columns, beams and roof etc.,
with 12mm thick in two coats with base coat of
8mm thick in CM (1:5) and top coat of 4mm thick in
CM (1:3) with dubara sponge finishing including
cost and conveyance of all materials like cement,
sand, water etc., to site, including seigniorage
charges, sales & other taxes on all materials, and
all operational, incidental charges on materials and
including cost of all labour charges for mixing
mortar, finishing, scaffolding, lift charges, curing,
including cutting grooves as directed by Engineer in - charge etc., and Overheads & Contractors
profit complete for finished item of work.
Sqm
825.00
b
Masonary Works (internal and External works)
Plastering both internal and exteranal to walls with
15mm thick in two coats with base coat of 10mm
thick in CM (1:5) and top coat of 5mm thick in CM
(1:3) with dubara sponge finishing including cost
and conveyance of all materials like cement, sand,
water etc., to site, including seigniorage charges,
sales & other taxes on all materials, and all
operational, incidental charges on materials and
including cost of all labour charges for mixing
mortar, finishing, scaffolding, lift charges, curing,
including cutting grooves as directed by Engineer in - charge etc., and Overheads & Contractors
profit complete for finished item of work.
Sqm
480.00
7
Joinery
a
Doors
Sqm
8.50
Supply and fixing doors as per drawings with
medium teak wood frame of section 100mm x 65
mm and
ISI marked flush door shutters
(ANAND/RAAVILA/KUTTY/STANDARD/SUBHDW
AR/ITP) of 35 mm thick single shutters with bond
wood solid block board type Core having cross
bands and face veneers, hot pressed bonded with
water proof phenol formaldehyde synthetic resin
factory made conforming to IS 2202-1991 (Part-I)
both sides Veener ply with external lipping on all
sides including cost and conveyance to site of teak
wood frame, flush shutter including supply and
fixing 6 nos MS Z hold fasts of size 230 mm x 40
mm x 5mm including cost of ISI marked aluminium
fixtures of 6 Nos butt hinges 150mm long , 1 No.
aldrop 300mm x 16 mm dia, 2 Nos tower bolts of
300 mm x 12 mm dia at top , 2 Nos 150 mm long
handles , 2 Nos heavy duty door stoppers and 2
Nos rubber bushes including fixing the fixtures to
door with required number of screws, bolt and nuts
including labour charges for fixing the frame in
position, fixing the shutter to the frame etc.,
including Overheads & Contractors profit complete
for finished item of work as per APSS 1001 & 1002
(The vertical frame of door shall be embedded in
flooring for a depth of not less than 10 mm)
b
Windows
Supply and fixing of aluminium glazed sliding
windows 2 track with aluminium anodised sections
of 63.5x38.1x1.5 mm and panel filling with 5mm
thick saint gobain plain glass including rubber
beeding, standard accessories like rollers, handles
etc., for sliding windows including cost of supply
and fixing of aluminium grill with F channel fixing to
window frame etc., complete and as directed by
Engineer-in-charge/Architect. The rate to include
MS grill with a weight of 15 kgs per Sqm
Sqm
21.75
c
Ventilators
Sqm
2.50
Sqm
112.50
-similar to above- but with top hung model
8
Flooring
a
Cement Flooring
15 mm thk. Flooring in CM 1:3 finished with floating
coat of neat cement including cost and conveyance
of all materials like cement, sand, water etc., to
site, including seigniorage charges, sales & other
taxes on all materials, and all operational,
incidental charges on materials and including cost
of all labour charges for mixing mortar, finishing, lift
charges, curing, including cutting grooves as
directed by Engineer - in - charge etc., and
Overheads & Contractors profit complete
for
finished item of work.
b
Vitrified flooring:
Flooring / treads with vitrified polished floor tiles of
1st quality and make as approved by Engineer-incharge of size not less than 598 mm x 598 mm x
8mm thickness and colours of choice of engineer
with borders and design as per the approved
flooring pattern as directed by the Engineer-In Charge set over a base coat of CM (1:8) prop.
12mm thick over CC bed already laid or RCC roof
slab , including neat cement slurry of honey like
consistancy spread @ 3.3 kgs per Sqm. and
jointed neately with white cement paste to full depth
mixed with pigment of matching shade including
cost and conveyance of all materials like cement,
sand, water, tiles, white cement etc., to site
(excluding cost of C.C. bed) including cost of
seigniorage charges on all materials, cost of base
coat and all labour charges for mixing of cement
mortar, laying tiles to required slope as directed
by the Engineer- in-charge etc.,and Overheads &
Contractors profit complete for finished item of
work. (Basic rate of tile is Rs.65/- per Sft)
Sqm
210.00
9
Water Proofing
Providing impervious coat to exposed RCC roof
slab surface with cement concrete 1:2:4 screed
mixed with water proofing compound conplast WP
90 of M/s. fosroc or its approved equivalent as per
manufacturers and as proved by the Engineer-incharge over the roof terraces after applying a
bounding coat of polymer bounding agent
NITOBOND of M/s.Fosroc maked with approved
equivalent mixed with cement slurry of / litre for 6
square metres at all hights for Filling undulation /
depression and maintatining gradient towards rain
water pipes for easy fiow of water using 10mm
maximum size graded stone aggregates, mixing in
mechanical mixture laid to required levels slopes,
and thickness, compacting, finishing, necessary
curing ect,. complete as specified and directed by
engineer- in- charge including lining at regularular
intervals of 45cmx45cm where ever necessary
including cost and conveyance of all materials like
cement, sand, water proofing compound, water
etc., to site, including seigniorage charges, sales &
other taxes on all materials and operational,
incidental, and labour charges for mixing mortar,
laying, lift charges, rendering smooth and thread
lining, curing including rounding off junctions of wall
and slab etc., and Overheads & Contractors profit
complete for finished item of work.
Sqm
360.00
10
Centering & Shuttering
Providing and Fixing centring and shuttering for
beams, slabs, footing, pedestals, Rcc walls etc., in
Steel centering , Steel scaffolding pipes , jack
props , wallers , Foot plates , brackets , steel
centering plates etc for all RCC works including
keeping in place securely as per IS 456
recommendation to all RCC surfaces. The rate to
include bracing all the pipes with rods etc., as
required at site, including sales & other taxes on all
materials and operational, incidental, and labour
charges for keeping the shuttering at place, lift
charges, rendering the plates with waste oil etc.,
and Overheads & Contractors profit complete for
finished item of work.
Sqm
1200.00
11
Reinforcement Steel
Supplying, fitting and placing Fe-415 bar
reinforcement in RCC works complete as per
drawings and technical specifications for bars
below 36mm dia including over laps and
wastage,where they are not welded including cost
and conveyance of steel, binding wire etc., lifting
charges of steel , placing in position, tying with
binding wire, all tools etc., and Overheads &
Contractors profit, taxes etc., all complete for
finished item of work . Note: The rate to include
welding for connecting old and new reinforcement
of RCC walls / Beams/ Slabs with that of old
reinforcement of RCC Walls/ Beams / Slabs
MT
24.75
12
Painting
a
Plastic emulsion
Painting
with
Acrylic
Exterior
emulsion
(Asian/Berger/Nerolac) to exterior faces of new
walls two coat of approved make shade and colour
over primer coat with cement primer water based
interior Gr-I (Asian/Berger/Nerolac) including cost
and conveyance of materials like Acrylic Exterior
paint, white cement to site including cost of
brushes, scaffolding charges, lift charges and
labour charges such as preparing the
wall,
applying primer coat , two coats of Acrylic Exterior
etc., and Overheads & Contractors profit complete
for finished item of work (APSS No.910, 911&1201)
in all floors.
Sqm
1100.00
b
Altek
Supply and application of two coats of Altek/Neon
Super fine, one coat of Altek/Sai coat/Neon water
based cement primer and two coats of Altek
Flora/Neon Super track for ceiling and internal
walls (emulsion paint) including cost and
conveyance of all materials to site, sales & other
taxes, incidental, operational and all labour charges
etc.,and Overheads & Contractors profit complete
for finished item of work
Sqm
270.00
13
Rain Water Down Take Pipes
Rm
12.00
Cu
m
30.00
Supplying and fitting 150 mm dia PVC down take
pipe including bends, half bends, extensions etc.,
making holes at the appropriate place in RCC for
Rain Water
14
Dismantling & Chasing of walls
Dismantling the following items with mechanical
and means including making the surfaces levelled
to the desired as per the engineer incharge, in
RCC, Brick, CRS etc., as per the side condition.
Cutting by welding the exposed reinforcement bar
and carting the waste to the unobjectionable area.
The rate to include all the consumables, rental for
equipments needed, labour centring, shuttering,
and props, including labour cost, profit etc., The
dismantling to include making all the surfaces
ready to connect all the new RCC, Brick and CRS
works all complete
Total
DISCOUNT
Percentage)
IN
ANY(Express
in
terms
of
Net Total
Signature of Agency with Seal