Josh Little Geog. 342 12/13/10 Executive Summary For my project, I chose to complete three Feature Analyst Tutorials and to document the methods, findings, and results. I decided that I would like to compare and contrast the extraction methods for different objects. This led me to run through Lesson 2: Airplanes Extraction, Lesson 3: Urban Streets Extraction, and Lesson 10: 3D Building Extraction. The lessons covered a few small areas from around the country that contained the data required for each extraction type. I anticipated that this project’s final result would be a better understanding of the Feature Analyst extension and its tools, which would lead to an increased knowledge of the different procedures and tricks for getting good extractions from different objects. Feature Analyst Tutorial Lesson 2: Airplanes Extraction In this lesson, the target features were all airplanes on a tarmac. The tutorial began by reviewing the pitfalls involved in drawing a bad training set and the importance of drawing good training sets to achieve the results wanted from feature extractions. I then reviewed the custom parameters associated with the Set up Learning dialog box. In the final exercise, I converted my polygon results to point results. This was all done while working within a geodatabase. Feature Analyst Tutorial Lesson 3: Urban Streets Extraction In this lesson, the target features were roads within an urban environment. I ran an extraction for urban streets, ran clutter removal with custom learning settings, converted the polygon results to lines, and then repaired the intersections using the Repair Intersection tool from the Feature Analyst toolbar. Feature Analyst Tutorial Lesson 10: Extract 3D Buildings In this lesson, I extracted suburban houses with the assistance of the elevation data file provided and the Digital Elevation Model (DEM) associated with the reflectance image. I then used Post Processing to square up the building features for an improved appearance. I also had to troubleshoot within ArcScene to view the extracted 3D buildings.