Engineering Technology BS- 78 credits
TRANSITION PROGRAM WORKSHEET
Engineering Technology courses
I. Required Technical Courses-21 credits
TADT 1210 Materials and Processes - Forming
TADT 1220 Materials and Processes - Separating
TADT 1315 Energy and Power Technology
TADT 1350 Electrical/Electronic Technology
TADT 1460 Technical Graphics
TADT 2250 Construction Technology
TADT 2370 Automation Technology
II. Required Professional Core-28 credits
TADT 3267 Engineering Cost Analysis
TADT 3885 Technical Sales, Service, and Training
TADT 4385 Sustainability & Emerging Tech
TADT 4537 Industrial Design/Innovation
TADT 4875 Facilities Management
TADT 4878 Quality Assurance
TADT 4897 Project Management
STUDENT NAME & BSU ID NUMBER
Cr. sub/trans Substitute/Transferred Courses
ADVISOR
Cr. Sem/Yr
Grade
3
3
3
3
3
3
3
4
4
4
4
4
4
4
III. Required Foundations Courses-13 credits***
Math Requirements-6 credits
Science Requirement-7 credits
IV Areas of Emphasis-complete A. or B.
A. Construction Management-Select 16 credits
TADT 3250 Print Reading & Project Documentation
TADT 3260 Project Bidding and Estimating
TADT 4259 Construction Management
TADT 4260 Computerized Construction Estimating
TADT 4777 Adv Topics in Tech/Construction
TADT 4970 Internship (4 credits)
B. Manufacturing Management-Select 16 credits
TADT 3217 Material Science & Metallurgy
TADT 3260 Project Bidding & Estimating
TADT 3700 Production Planning & Control
TADT 3878 Industrial/Engineer Production Studies
TADT 4777 Adv Topics in Tech/Manufacturing
TADT 4970 Internship
4
4
4
4
4
4
4
4
4
4
4
4
*** Required Foundations Courses – Students are required to take 6 credits of Math at the 1100 or higher level. Students are encouraged to take statistics and
calculus. In addition, students are required to take 7 credits from among the Physics, Chemistry, or Physical Science (specifically, SCI 1110 and SCI 1120) courses
that are approved to fulfill Liberal Education Goal Area 3. Other Goal Area 3 courses may be substituted if approved by the Chair of the Department of Technology,
Art and Design. Students are encouraged to take a combination of Physics and Chemistry.
Signatures should be completed if form is included in graduation plans packet to be submitted to Records.
Faculty Advisor Signature _______________________________________________
Date _____________________
TAD Department Chair Signature _________________________________________
Date _____________________
Industrial Technology BS- 81 credits
previous program with IT courses/2.25 GPA required
TRANSITION PROGRAM WORKSHEET
STUDENT NAME & BSU ID NUMBER
ADVISOR
Engineering Technology courses
I. REQUIRED TECHNICAL COURSES-32 credits
IT 1210 Materials And Processes - Forming
IT 1220 Materials And Processes - Separating
IT 1310 Mechanical Power
IT 1350 Electronic Technology
IT 1460 Technical Graphics
IT 2250 Construction Technology
IT 2370 Automation Technology
IT 3310 Fluid Power
IT 4537 Industrial Design
Select other courses with advisor
Cr.
Cr.
II. REQUIRED PROFESSIONAL CORE-18 credits
IT 3870 Technical Sales/Presentations
IT 3880 Human Resource Development
IT 3890 Material Handling And Plant Layout
IT 4877 Industrial Maintenance And Safety
IT 4878 Quality Assurance
IT 4890 Industrial Organization And Leadership
IT 4897 Project Management
III. Required Foundations Courses-13 credits***
Math Requirements-6 credits
sub/trans
Substitute/Transferred Courses
Sem/Yr
Grade
4
4
2
4
3
2
3
3
3
2
2
2
3
3
3
3
Science Requirement-7 credits
A. Construction Management
Block 1-Required 12 credits
IT 3240 Construction Materials And Practices
IT 3250 Print Reading and Project Documentation
IT 3260 Project Bidding And Estimating
IT 4259 Construction Management
Block 2:Select 6 semester credits
3
3
3
3
IT 4970 Internship or select among ACCT and BUAD non-liberal Education courses.
B. Manufacturing Management
Block 1-Required 12 credits
IT 3460 Parametric 3-D Modeling (3 credits)
IT 3877 Engineering Problem Solving (3 credits)
IT 3879 Performance Measurement (3 credits)
IT 4870 Production Management (3 credits)
IT 4880 Total Quality Management (3 credits)
Block 2:Select 6 semester credits
3
3
3
3
3
IT 4970 Internship or select among ACCT and BUAD non-liberal Education courses.
*** Required Foundations Courses – Students are required to take 6 credits of Math at the 1100 or higher level. Students are encouraged to take statistics and calculus. In addition,
students are required to take 7 credits from among the Physics, Chemistry, or Physical Science (specifically, SCI 1110 and SCI 1120) courses that are approved to fulfill Liberal
Education Goal Area 3. Other Goal Area 3 courses may be substituted if approved by the Chair of the Department of Technology, Art and Design. Students are encouraged to take a
combination of Physics and Chemistry.
Signatures should be completed if form is included in graduation plans packet to be submitted to Records.
Faculty Advisor Signature ______________________________________________________
Date ________________________
TAD Department Chair Signature ________________________________________________
Date ________________________