GOVERNMENT OF PAKISTAN
MINISTRY OF FINANCE & REVENUE
(REVENUE DIVISION)
*****
Islamabad, the 26th June, 2014.
NOTIFICATION
(CUSTOMS)
S.R.O. 565 (I)/2014.- In exercise of the powers conferred by section 19 of the
Customs Act, 1969 (IV of 1969), the Federal Government is pleased to direct that the
following further amendments shall be made in its Notification No. S.R.O 565(I)/2006,
dated the 5th June, 2006, namely:In the aforesaid Notification,(a)
in the preamble, after the word and comma “assemblies,” the words and
comma “as are not manufactured locally,” shall be inserted;
(b)
in the conditions,(i)
in condition (i), for the words “Collector of Customs”, the words,
brackets
and
letters
“Director
Input
Output
Co-efficient
Organization (IOCO)” shall be substituted;
(ii)
for condition (ii), the following shall be substituted, namely:“(ii) the importer-cum-manufacturer shall file a request containing a
declaration of input-output ratios to the Director of IOCO or the
person duly authorized by him. The Director or the authorized
person may accept the declaration of input-output ratio as declared
by the applicant and determine the annual requirement of inputs. In
case the Director or authorized person is not satisfied with declared
input-output ratios of the items to be manufactured because of their
being prima-facie not in accordance with the prevalent average of
the relevant industry or for any other reason, he may, after allowing
a reasonable provisional quantity, verify input output-ratios or
through Sector Specialist of IOCO or make a reference to any
other recognized authority for determination thereof. The Director
or authorized person shall then determine the final annual
quantitative entitlement of inputs and the applicant shall proceed to
consume imported inputs in accordance with the input-output ratios
and quantities so determined;”;
(iii)
in condition (iv),(a) for the word “Collectorate of Customs”, the words and letters
“Directorate of IOCO” shall be substituted; and
(b) for the words and slash
“Collectorates/ Customs stations”,
occurring for the second time, the words and letters
“Directorate of IOCO” shall be substituted;
(iv)
for condition (vii), the following shall be substituted, namely:“(vii) the importer-cum-manufacturer shall in writing communicate
to the concerned Director of IOCO about the consumption of
imported items within sixty days of consumption of goods. After
carrying out reconciliation by the concerned Directorate of IOCO,
the clearance certificate shall be issued by the Director of IOCO or
his authorized person on the basis of which the post dated cheque
shall be released or cancelled by the Collector of Customs of
concerned import Collectorate. In case of non-consumption of
imported goods within one year from the date of import, the
importer shall pay the customs-duty and other taxes involved or
obtain extension for further period from the concerned Director of
IOCO after giving plausible reasons for seeking extension in
utilization period;”;
(v)
in condition (viii),(a) after the word “the”, occurring first, for the words “Collector of
Customs of the import Collectorate”, the words and letters
“Director of IOCO” shall be substituted; and
(b) for the words “the Collector of the import Collectorate may”,
the words and letters “the Director of IOCO shall communicate
the audit findings to the concerned Collector of Customs of the
import Collectorate who shall” shall be substituted; and
(vi)
in condition (ix), for the words “Collector of Customs”, the words
and letters “Director of IOCO” shall be substituted;
(c)
for the TABLE, the following shall be substituted, namely;“TABLE
S.
No.
Description of
goods to be
manufactured.
(1)
1.
(2)
Air conditioners.
Heading
or Subheading
Nos.
Extent of
exemption
from
customs
duty in
excess of
rates
given
below.
(3)
Raw Materials
(4)
(5)
(1)
Hot stamping foil
3212.1000
10%
(2)
Copper tube in coils
7411.1090
10%
Description of raw
materials, subcomponents,
components, subassemblies and
assemblies.
Sub-components &
Components
(1)
Terminal block.
8415.9099
15%
(2)
Remote control.
8415.9099
15%
(3)
8501.4090
15%
(4)
Single phase AC motor upto
320 watts
Axial fan
8414.5190
15%
(5)
Plasma filter assembly.
8415.9099
15%
(6)
Cross flow fan - indoor unit
8414.5190
15%
Special
conditions
(6)
A. The inhouse facility
for air
conditioner
manufacturing
shall include
the following: (i) Charging
machine
(ii) Condenser
bending
machine
(iii) Rear panel
bending
machine
(iv) Front
panel bending
machine
(v) Press
Machines.
(vi) Halogen
leak detector
(vii) Shearing
machines
(viii) Tapping
machines
(ix) Riveting
machines
(x) Spot
welding
machines
(xi) Evaporator
bending
machine
B. The
2.
Raw Materials
Deep-freezers/
chest cooler.
(1)
Hot stamping foil.
3212.1000
10%
(2)
Soft PVC compound
according to DIN 53 739 or
equivalent
Copper tube in coils
3904.2200
10%
7411.1090
10%
(4)
Polyester Coated Painted
Aluminium Sheet with
Protection Film in Coils
7606.9290
10%
(5)
Alluminium sheet embossed
or patterned
7606.9290
10%
8418.9990
8535.3010
8539.2200
15%
15%
15%
(3)
(1)
(2)
(3)
Sub-components &
Components
Terminal blocks.
Light switch.
Lamps of a power not
exceeding 20 watts.
concessions
under SRO
shall only be
available to
the
manufacturers
availing the
IOR for all the
Subcomponents
and
Components
provided in
SRO.
A. The inhouse facility
for deep
freezer/ chest
cooler
manufacturing
shall include
the following: (i) Sheet Metal
Shop
(ii) Paint shop
(iii) Vacuum
forming
machine along
with moulds
(iv) Foaming
machine along
with moulds,
jigs and
fixtures.
B. The
concessions
under SRO
shall only be
available to
the
manufacturers
availing the
IOR for all the
Subcomponents
and
Components
provided in
SRO.
3.
Raw Materials
Refrigerators/
Visicoolers.
(1)
Hot stamping foil.
3212.1000
10%
(2)
Soft PVC compound
according to DIN 53 739 or
equivalent
Copper tube in coils
3904.2200
10%
7411.1090
10%
(3)
Sub-components &
Components
4.
(1)
Terminal blocks.
8418.9990
15%
(2)
(3)
Light switch.
Lamps of a power not
exceeding 20 watts.
Sub-components &
Components
8535.3010
8539.2200
15%
15%
(1)
Terminal blocks.
8450.9000
15%
(2)
Single phase AC motor upto
320 watts.
8501.4090
15%
Washing
Machines
A. The inhouse facility
for refrigerator/
visicooler
manufacturing
shall include
the following: (i) Sheet Metal
Shop
(ii) Paint shop
(iii) Vacuum
forming
machine along
with moulds
(iv) Foaming
machine along
with moulds,
jigs and
fixtures.
B. The
concessions
under SRO
shall only be
available to
the
manufacturers
availing the
IOR for all the
Subcomponents
and
Components
provided in
SRO.
The in-house
facility for
washing
machine
manufacturing
shall include
the following: (i) Sheet metal
shop for metal
body
machines.
(ii) Injection
moulding
machines
along with
moulds at
least for the
wash tub.
5.
Raw Materials
Car Airconditioners
(1)
(2)
(3)
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
(14)
(15)
(16)
(17)
(18)
(19)
(20)
(21)
(22)
(23)
(24)
(25)
(26)
(27)
(28)
(29)
(30)
(31)
6.
Powder
Coatings.
(1)
(2)
Nil
Rubber hose (high
pressure).
Aluminium sections.
Aluminium Foil
Sub-components &
Components
Plastic caps.
Blower wheel.
Net Filter
Belt for compressor.
Bracket (Aluminum).
Stay for sensor.
Fan
Pipes.
Suction/discharge fitting
assy.
Distributor assy.
Condenser partition
plate/separator.
Side plates for condensers /
evaporators.
AC Control Unit / Controller
AC
Body accumulator.
Capsule for heater core.
Evaporator core plate.
HVAC door sub assembly.
Glass sight/joint receiver.
Insert for heater core.
Tank header, plate and
header pipe for condensers
/ evaporators.
Tubes for condensers/
Tubes for Evaporators/
Tubes for Heater/ M tubes.
Actuator.
Clutch magnet for
compressor & parts.
Core Sub-Assy Heater
O-Flex
Sensor Bulb Insulator
Aluminium fins/corrugated
fins.
Idle pully.
Fuse assy.
Switches.
Condensers
Raw Materials
4009.3130
10%
7604.2990
7607.1990
10%
10%
8415.9091
8415.9091
8415.9091
4010.3110
7616.9990
7616.9990
8414.5190
8415.9091
8415.9091
15%
15%
15%
15%
15%
15%
15%
15%
15%
8415.9091
8415.9091
15%
15%
8415.9091
15%
8415.9091
15%
8415.9091
8415.9091
8415.9091
8415.9091
8415.9091
8415.9091
8415.9091
15%
15%
15%
15%
15%
15%
15%
8415.9091
15%
8415.9091
8415.9091
15%
15%
8415.9091
7607.2000
3919.9090
8415.9099
15%
15%
15%
15%
8483.5090
8536.1000
8536.5091
8415.9021
15%
15%
15%
20%
Organic and inorganic
pigments.
Epoxy resin.
3204.1700
10%
3907.3000
10%
Nil
(3)
7.
8.
Chrysotile
Cement Pipes,
Sheets &
Fittings
Evaporators and
Condensers for
air-conditioners,
deep freezers
and refrigerators
and Industrial
Evaporators &
Condensers for
Chilled Water
Coils, Steam
Heating Coils,
Shell & Tube
Type
(2)
(3)
(4)
(5)
(6)
10.
Air-conditioning,
chilling,
humidification
and industrial
refrigeration
plants.
Alkyd resins.
(1)
(2)
(3)
11.
Aluminum presensitized
printing plates.
(1)
(2)
(3)
12.
3907.9900
2524.9000
10%
10%
Raw Materials
(1)
9.
Polyester resin.
Chrysotile Asbestose
Articles of
stationery.
(1)
Nil
Steel Galvanized Coated
Sheet
Copper Fin stock
Copper Tubes in coils.
Galvanized Steel Tube
Copper tube/ pipes
Aluminum Foil
Raw materials
7210.4190
5%
7409.1100
7411.1090
7306.9000
7411.1090
7607.1990
Respective
Headings
5%
10%
10%
10%
10%
10%
Sub-components and
components
Modules / assemblies
Respective
Headings
Respective
Headings
15%
1507.1000
10%
1513.1100
2707.5000
10%
10%
Raw materials.
Crude soybean oil, whether
or not degummed.
Crude coconut oil.
Solvent C – 9
Raw Materials
Nil
Nil
15%
Nil
Nil
Unbleached kraft / black
polyethne coated paper.
Aluminum sheet
Aluminum foil.
Raw Materials
4811.5990
5%
7606.1100
7607.1990
5%
5%
Potato starch
1108.1300
Nil
0%
(2)
Acid dyes whether or not
premetal lised, and
preparations based thereon;
mordant dyes and
preparations based thereon
(acid dyes / dyestuff) ), nontextile grade
Pigments and preparations
based thereon (pigments) ),
non-textile grade
3204.1200
0%
3204.1700
0%
Stamping foil
Inks for ball points pens,
fine liners and fibre tips
Edenol
Hardners
Acrylic polymer (fast drying)
Alkyd resins (fast drying)
Amino-resins (fast drying)
Cellulose nitrate
Carboxyl-methyl cellulose
and its salts (carboxy
methyl cellulose)
Porous fibre rods for making
marker nibs
Heat transfer film
Electro galvanized wire
Spring wire
Brass alloy wire
Wood sandwich blocks with
lead encased
3212.1000
3215.9010
0%
0%
3824.9099
3824.9099
3906.9090
3907.5000
3909.3000
3912.2010
3912.3100
0%
0%
0%
0%
0%
0%
0%
3916.9000
0%
4908.9000
7217.2000
7217.9000
7408.2100
9609.9000
0%
0%
0%
0%
0%
2803.0090
7326.9020
5%
5%
8214.1000
9608.6000
5%
5%
9608.9100
5%
9608.9100
5%
9608.9100
9609.2010
5%
5%
(9)
(1)
Nibs made of special metal
for use in manufacture of
writing instruments (fountain
pen nibs)
Nibs points( for fiber tip
pens and markers)
Tips for fineliners
Raw cores used for making
black lead
Color lead
Polyurethene resin.
9609.9000
3208.9090
5%
10%
(2)
Release paper.
4811.5990
10%
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
(14)
(15)
(16)
(17)
(18)
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
13.
Artificial leather
industry
Parts and Components.
Carbon for lead
Steel balls not exceeding
1mm diameter (steel balls)
Sharpener blades
Synthetic fiber reservoirs of
the kind used in writing
instruments (ink reservoirs)
Nil
14.
15.
Bolts, nuts,
screws,
concrete nails
and blind rivets.
(1)
Brass wire.
7408.2100
10%
(2)
(3)
Aluminum wire.
Aluminum Alloy Wire
Raw Materials
7605.1900
7605.2900
10%
10%
Pigments.
Coloring ink.
Wire drawing lubricant.
Polyethylene compound
(cable grade).
Polybutylene b trephthalate
(mbt).
Fiber Reinforced
Polypropylene / Glass
Reinforced Polypropylene.
Core covering tape.
Identification tape, PP
Film/Filler/Tape
Malinex Tape, P.P. Film,
Polypropylene Tape
Insulating paper.
Emulsion Filter Paper
Binder yarn.
Binder tape.
Polypropylene Filler/ Twin
Yarn
Semi conducting Nylon /
Rubber insulation tape.
Semi conducting tape.
Copper covered steel wire.
Aluminum strip.
Aluminium foil strip (both
sides PE laminated).
Single / Multi mode optical
fiber (ITU-T G-652, ITU-T
G-651 & ITU-T G-655).
3204.1700
3215.9090
3403.1990
3907.6090
10%
10%
10%
10%
3907.7000
10%
3916.9000
10%
3920.1000
3921.1900
10%
10%
3921.1900
10%
4804.2900
5603.1200
5607.4100
5607.4100
5607.4900
10%
10%
10%
10%
10%
5906.9900
10%
5906.9900
7217.3090
7606.9290
7607.2000
10%
10%
10%
10%
9001.1000
10%
Cables and
Conductors.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
(14)
(15)
(16)
(17)
(18)
(19)
(20)
16.
(1)
(1)
17.
Defense stores,
machinery and
equipment
manufactured
for the use of
defense forces.
Nil
Raw Materials
Composite rollformed window
and doors
Electro galvanized coils
Component
Float glass
Raw materials
Nil
Nil
7210.3010
7210.4910
7210.7020
15%
15%
15%
7005.1000
7005.2100
Respective
Headings
20%
20%
10%
Under the
certificate from
the Director
General
Defense
Production,
Ministry of
Defense,
Government of
Pakistan.
18.
Diapers and
Sanitary
Napkins.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
(14)
(15)
19.
Sub-components and
components.
Raw Materials
Respective
Headings
Adhesives based on
polymers or rubbers.
Hot melt adhesive.
Pre-Laminated Tape
Frontal Tape
PE + NW laminate sheet.
Poly back sheet.
3506.9190
10%
3506.9190
3919.1090
3919.9090
3920.1000
3920.1000
3920.9900
3920.9900
3920.9900
3920.9900
3921.9090
4803.0000
10%
10%
10%
10%
10%
10%
10%
10%
10%
10%
10%
4810.9900
5603.1100
10%
10%
5603.1200
5603.9200
6001.2210
6001.2290
10%
10%
10%
10%
Frontal tape.
Pre laminated tape.
Perforated poly film.
Waist Band Barrier
Toilet or facial tissue stock,
towel or napkin paper of a
kind used for household or
sanitary purpose (nonporous).
Siliconised paper.
Non-wovens, whether or not
impregnated, coated,
covered or laminated of
man made filaments.
Acquisition Layer
Loop pile fabric.
15%
Nil
Raw Materials
Diesel
generating Sets.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
Insulating varnish class f
insulation.
Impregnating resin.
Laminated polyester paper
sheets/strips for electric
insulation 0.20mm to 0.50
mm thick.
Insulating glass sleeve
(round/flat ) 1.5mm to
20mm dia.
Resiglass insulating tape
0.3 x 20mm.
Flat Enamel copper wire.
Electric cables rubber
/silicon insulated, 0.50mm2
to 150mm2.
Nil
3208.9011
5%
3907.7000
4807.0000
5%
5%
7019.9010
5%
7019.9090
5%
8544.1190
8544.6000
5%
5%
Insulating varnish class H
insulation.
Sub-components &
Components
Flexible exhaust extension
pipe type nsn6115-17-0443839 cut to size.
Steel keys.
Diesel Engines above 65
HP.
Flexible Coupling
Condensers 2x0.027 mf.
Rotor for generator.
Terminals.
Transformer current/
voltage 20/5a-200/5a-30va.
100/5a-200/5a and 380v415v 300-500/5a 6001600/5a.
Chokes 110v - 415 v.
Capacitors / condensers
4mkv-20mkv 1000-660v.
Selector switch.
Plugs and socket upto 250v
/ upto 250a.
Contactors 3.2a- 250a / 24415v.
Fuse base/ caps / adapters
/ fuse collar.
Screw safety insert 35 to
150amps.
Disposable/Auto Disable
Syringes
3208.9020
5%
7307.9900
10%
7318.2900
8408.9000
10%
10%
8483.6099
8503.0090
8503.0090
8503.0090
8504.3100
10%
10%
10%
10%
10%
8504.9090
8532.9090
10%
10%
8536.5099
8536.6990
10%
10%
8536.9090
10%
8536.9090
10%
8536.9090
10%
(1)
(2)
Epoxy bond.
PVC (medical grade).
3506.1000
3904.2200
5%
5%
(3)
Plastic film (medical grade).
3920.2040
5%
(4)
(5)
(6)
PVC gaskets.
Rubber gaskets.
Bulk Needles without plastic
Hub and Cover
I.V Cannula.
Teflon Tubes
Blister Paper
Membrane Filter Paper
Needles
Disposable Infusion
Giving Sets.
PVC Medical Grade (NonToxic)
Latex Tube
Bulk Needles without plastic
3921.9090
3923.5000
4016.9310
9018.3200
5%
5%
5%
5%
3917.2100
4802.6990
4823.2000
9018.3200
5%
5%
5%
5%
3904.2200
5%
4006.9000
9018.3200
5%
5%
(8)
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
(14)
(15)
20.
Disposable/Auto
Disable
Syringes
(A)
(B)
(1)
(2)
(3)
(4)
(C)
(1)
(2)
(3)
Nil
21.
Hub and Cover
Raw Materials
Dry Battery
Cells.
(1)
(2)
22.
Pigment and
Dyes stuff,
Textile and
Tanning
Chemical
Auxiliaries of
headings 32.04,
34.03 and
38.09.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
23.
Electrical
Capacitors
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(1)
(2)
(3)
24.
Industrial
Switchgears &
High Voltage
Electrical
Switches
(1)
(2)
(3)
(1)
(2)
Nil
Acetylene black.
Electrolytic paper.
Raw Materials
2803.0020
4811.9000
Hydrocarbon Solvent
Hydrocarbon Solvent
Carbon Black
Wetting Agent (ARW)
Sodium Lauryl Sulfate
Dispersants
Non-ionic Surface Active
Agents
Raw Materials
2707.5000
2710.1999
2803.0090
3402.1190
3402.1190
3402.1300
3402.1300
Epoxy Resin
Polyurethane Resin
BOPP Film (Plain capacitor
grade)
BOPP Film (Metalized
capacitor grade)
Polyester / Polypropylene
seal Film
Insulating Paper
Aluminum Foil (99.9% purity
electrolytic grade, plain and
etched)
3907.3000
3907.3000
3920.2010
10%
10%
10%
3920.2030
10%
3920.2090
10%
4823.9090
7607.1100
10%
10%
4016.9320
8532.9090
8546.9000
15%
15%
15%
Sub-components &
Components
Silicon Rubber Seals
Supporting Kernels
Insulating Cover Sleeve
Raw Materials
Dyes
Heat Resistant Cable upto
1000V
Poly Carbonate Sheets
Sub-components &
Components
Cable Marking Strip
Self Clunching Stud
5%
5%
Nil
15%
15%
15%
15%
15%
15%
15%
Nil
Nil
3204.1700
8544.4990
10%
10%
3920.6100
10%
3926.9099
7318.1690
15%
15%
(3)
(4)
Transformers upto 1 KVA
H.T. Current Transformers
exceeding 2500A & 25 kV/3
Sec Isc.
8504.3100
8504.3200
15%
15%
(5)
H.T. Capacitors exceeding
1000 V
H.T.Fuses (above 1000V)
Switches (not domestic)
8532.2900
15%
8535.1000
8535.3010
8536.5099
8535.4010
8536.1000
8536.1000
8536.2090
15%
15%
15%
15%
15%
15%
15%
8536.6990
15%
8536.9090
8536.9090
15%
15%
8536.9090
9028.3000
15%
15%
9032.1090
15%
8539.2990
15%
3204.1700
3208.9090
3208.9090
3403.1990
3405.1010
3506.9110
3920.5900
3921.9090
3926.9060
4411.9400
4811.5990
56.03
5603.1300
5906.1000
6002.4000
6406.9000
10%
10%
10%
10%
10%
10%
10%
10%
10%
10%
10%
10%
10%
10%
10%
10%
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
(14)
(15)
(16)
(17)
(18)
25.
Footwear.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
(14)
(15)
(16)
26.
High Pressure
Laminate
(Formica) and
Low Pressure
Laminates.
(1)
(2)
(3)
Lightening Arrestors
Fuses
HRC Fuses (Industrial)
Automatic Circuit Breakers,
Pole 1, 2 & 3 upto 10A
Industrial Plugs and
Sockets
Capacitor Trip Units
Contactors/Thyristors/Trans
ducers
Control Unit
Combined Electronic Meter
Thermostat for Industrial
Switch Gears
Bulbs upto 20 watts
Raw Materials
Masterbatch.
PU paints.
Bayderm Sealer SL-01
Release agents.
Wax cream.
Shoe adhesives.
Cutting Boards
Toe puff material.
Shoe Lasts (Plastic)
Fibre board.
Insole board.
Non-woven lining material
Combralla lining material.
Shoe reinforcement tapes.
Mesh material
Parts of footwear of other
materials
Raw Materials
Printed decorative paper
Plain decorative paper
Saturating kraft paper
Nil
The import of
Saturating
kraft paper is
allowed for
High Pressure
Laminate
(Formica) only.
4811.9000
4805.9190
4804.3100
10%
10%
10%
27.
Raw Materials
Manufacture or
formulation of
Agricultural
pesticides by
manufacturers
or formulators
duly recognized
and approved by
the Ministry of
National Food
Security and
Research.
(i)
(ii)
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
(14)
(15)
(16)
Oils and other products of
distillation of high
temperature, coal-tar and
similar products in which the
weight of the aromatic
constituents exceeds that of
non-aromatic constituents.
Nil
2707.5000
5%
2707.9100
2707.9990
2710.9900
5%
5%
5%
2707.3000
2707.5000
2902.1990
0%
0%
0%
2902.3000
2902.4400
2902.9010
2903.3960
2903.3960
0%
0%
0%
0%
0%
2905.1100
2905.3200
0%
0%
2905.4900
0%
2906.2910
2906.2990
0%
0%
2909.4910
0%
2912.1100
2914.2200
0%
0%
Following active ingredients
for pesticides registered by
the Department of Plant
Protection under the
Agricultural Pesticides
Ordinance, 1971(II of 1971),
stabilizers, emulsifiers and
solvents: Xylol (xylenes)
Solvent C-9
- Beta Pinene / Agrotin 527 /
Terpenic derivative
Toluene
Mixed xylene isomers
Naphthalene
Ingredients for pesticides
Cadusafos Technical
Material
Methanol (methyl alcohol)
Propylene glycol (propane1, 2-diol)
Adhesives Polyvinyl
Acetate, Polyvinyl Alcohol
Ingredients for pesticides
Other Ingredients for
pesticides
Solvenon MP / 1-Methoxy
2-Propanol, Methyglycol
Acetate
Methanal (formaldehyde)
Cyclo-hexanone and
methyl- cyclo-hexanones
(17)
(18)
(19)
(20)
(21)
(22)
(23)
(24)
(25)
(26)
(27)
(28)
(29)
(30)
(31)
(32)
(33)
(34)
(35)
(36)
(37)
(38)
Cyclohexanon,
Cyclohexanone Mixed
petroleum Xylene (1,2 & 1,3
& 1,4 dimethyl benzene and
ethyle benzene)
Acetic anhydride
Ingredients for pesticides
Dioctyl orthophthalates
Ingredients for pesticides
Ingredients for pesticides
Other Ingredients for
pesticides
Endosulfan Technical
Material
Other Ingredients for
pesticides
Diethylamine and its salts
Ingredients for pesticides
Other Ingredients for
pesticides
Ingredients for pesticides
Triethanolamine and its
salts
Ingredients for pesticides
Methidathion Technical
Other Ingredients for
pesticides
Lufenuron Technical
Alpha cyano, 3phenoxybenzyl (-) cis, trans
3-(2,2-diclord vinyl) 2,2
dimethyl cyclopropane
carboxylate
(S) Alpha cyano, 3phenoxybenzyl (S)-2-(4,
chloro phenyl)-3 mehtyl
butyrate
Cyano, 3-phenony benzyl
2,2,3,3 tetra methyl
cyclopropane carboxalate
2914.2990
0%
2915.2400
2916.3920
2917.3200
2918.9910
2919.9010
2919.9090
0%
0%
0%
0%
0%
0%
2920.9020
0%
2920.9090
0%
2921.1990
2921.4310
2921.4390
0%
0%
0%
2921.5110
2922.1390
0%
0%
2924.2950
2924.2950
2924.2990
0%
0%
0%
2924.2990
2926.9010
0%
0%
2926.9020
0%
2926.9030
0%
Cypermethrin, Alpha
Cypermethrin, BetaCypermethrin, ZetaCypermethrin,
Lambda Cylalothrin,
Deltamethrin,
Fenpropathrin,
Esfenvalerate, Bifenthrin
Technical MaterialAcetamiprid, Imidacloprid
Technical MaterialMonomehypo,
Chlorothalonil Technical
MaterialBromoxynil Technical
Material
2926.9050
0%
(39)
(40)
(41)
(42)
(43)
(44)
(45)
(46)
(47)
(48)
(49)
(50)
(51)
(52)
(53)
(54)
(55)
(56)
(57)
(58)
(59)
(60)
(61)
Other nitrite compoundsCyfluthrin, Beta Cyfluthrin
Technical Material
2-N, N-Dimethyl amino-I
sodium thiosulphate, 3thiosulfourropane
S-S (2 dimethyl amino
(trimethylene) bis (thio
carbamate)
2926.9090
0%
2930.2010
0%
2930.2020
0%
Ingredients for pesticides
2- N,N-dimethyamino 1,3
disodium thiosulphate
propane
O,S-dimethyl
phosphoramidothioate
Diafethiuran technical
(itertbutyl) 3-2-6 disopropyl
(4-phenoxyphenyl)
thiourene
O-O diethyl O-(3,5,6
trichloro pyridinyl)
phosphorothioate
O-(4-bromo, 2-chloro
phenyl) o-ethyl s-propyl
(phosphorothioate)
O,O duethyl O-(3,5,6trichloro 2-pyridyl)
phosphorothioate
Ingredients for pesticides
Other orgonosulpher
compounds
- Ethion, Methamidophos
Technical Material
- Dimethysulfoxid
2930.2030
2930.9010
0%
0%
2930.9020
0%
2930.9030
0%
2930.9040
0%
2930.9050
0%
2930.9060
0%
2930.9070
2930.9099
0%
0%
Other Ingredients for
pesticides
Other Ingredients for
pesticides
Ingredients for pesticides
Other Ingredients for
pesticides
Ingredients for pesticides
2,3 Dihydro 2-2 dimethyl-7
benzo furanyl methylcarbamate
Other ingredients for
pesticides
- Carbosulfan Technical
Material
Ingredients for pesticides
Other Ingredients for
pesticides
- Chlorpyrifos, Triazophos,
Diazinon Technical Material
Pyrimethanine
2930.9099
0%
2930.9099
0%
2931.9040
2931.9090
0%
0%
2932.1900
2932.9910
0%
0%
2932.9990
0%
2932.2030
2933.3990
0%
0%
2933.5950
0%
2933.6910
0%
(62)
(63)
(64)
(65)
(66)
(67)
(68)
(69)
(70)
(71)
(72)
(73)
(74)
(75)
(76)
(77)
(78)
(79)
(iii)
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
(14)
28.
Master Batches
Ingredients for pesticides
- Atrazine Technical
Material
Isatin (lactam of istic acid)
1-Vinyl-2-pyrrol-idone
- Triazophos Technical
Material
Penconazole Technical
Ingredients for pesticides
Ingredients for pesticides
Difenoconazole Technical
-Methyl benzimidazol – 2 –
ylcarbamate.
Ingredients for pesticides
- Abamectin
Sulphonic acid (Soft)
Other surface active agents
Catonic
Non ionic surface active
agents
Other organic surface active
agents and preparation
Chemical preparations
Following raw materials for
manufacture of Technical
Grade Emamectin Benzoate
(registered by the
Department of Plant
Protection under the
Agricultural Pesticides
Ordinance, 1971):Ethyl alcohol
Phosphoric acid (H3P04)
Sodium borohydride
(NaBHB)
Dichoromethane (methylene
chloride)
Isopropyl acetate
Trifluroacetic Acid
Allylchloroformate (Esters of
Acrylic Acid)
Benzoic Acid
Phenyl Dichlorophosphate
Tetramethylethylene
Diamine
Heptamethyl disilazane
Dimethyl Sulfoxide
1-methyl propyl-25-1methylavermectin
Palladium
Pigments, Dyes,
Additives, Fillers, Resins.
2933.6940
2933.6990
0%
0%
2933.7910
2933.7920
2933.9910
0%
0%
0%
2933.9990
2934.1010
2934.9920
2934.9920
2938.9010
0%
0%
0%
0%
0%
2939.9910
2941.9070
3402.1110
3402.1190
3402.1290
3402.1300
0%
0%
0%
0%
0%
0%
3402.1990
0%
3402.9000
0%
3824.9099
0%
2207.1000
2809.2010
2850.0000
10%
0%
0%
2903.1200
0%
2915.3990
2915.9000
2916.1200
0%
0%
0%
2916.3110
2920.9090
2921.2990
0%
0%
0%
2921.2990
2930.9099
2932.1900
0%
0%
0%
3815.9000
0%
Nil
(1)
(2)
Carbon Black
Dispersing agent.
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
Acids Dyes and Preparation
Pigments and Preparations
Brightening Agent
Other Pigments.
Ultramarine.
Lithophone.
Aluminium Paste & powder.
Non-Ionic surface active
agent.
Other surface active agent.
Other Polyacetals.
Collodium wool (NC).
Raw Materials
(11)
(12)
(13)
29.
Metallic Yarn /
Powder
(1)
(2)
(3)
30.
31.
1511.9010
10%
(2)
Inedible Animal Or
Vegetable Oil and Fats
Raw Materials
Carbon Black
Driers.
Alkyd Resin
Nitrocellulose
Resins.
1518.0000
15%
(1)
(2)
(1) Sugar Mill.
Nil
Palm Stearin.
Seamless pipes.
34.
10%
10%
10%
(1)
Printing ink.
Toilet Soap
Industry
3402.1990
3907.7000
3912.2090
3907.3000
3920.6200
7605.1900
Stearic Acid/
Distilled Fatty
Acid (DFA)
33.
10%
10%
10%
10%
10%
10%
10%
10%
10%
10%
10%
Epoxy amino resin
Un-coated polyester film
Aluminium wire
Raw Materials
(1)
(2)
(3)
(4)
(5)
32.
2803.0090
2905.4400
2905.4500
3204.1200
3204.1700
3204.2000
3206.2090
3206.4100
3206.4210
3212.9010
3402.1300
(1)
10%
10%
10%
Nil
Nil
2803.0090
3211.0090
3907.5000
3912.2010
3912.2090
10%
15%
15%
15%
15%
3824.9099
5%
7214.9990
5%
Surface active agents.
34.02
15%
Nil
Raw materials,
Sub-components and
Components.
Respective
Headings
5%
Supplies to
the export
sector (PCT
headings of
such inputs
including raw
materials and
other articles
as indicated by
the IOCO) or
to exempt
industrial units,
Raw Materials
Lubricating anti-rust and
anti-corrosion preparation.
Special steel round bars
and rods of non- alloy steel
exceeding diameters 75 mm
projects, and
agencies or
imported by
recognized
local
manufacturers
of Heavy
Engineering
Goods.
(2) Cement
plant.
(3) Plants for
the production of
industrial
chemicals.
(4) Thermal
power plant.
(5) Hydel
Power Plant.
(6) Fertilizer
plants.
(7) Heat
exchangers,
pressure
vessels,
Coloumns,
filters,
production
separators,
coolers and
boilers, Bundle
of Heat
Exchanger,
Economizer /
Deaerator /
Storage Tanks /
Silencer, Heat
Recovery Steam
Generator
HRSG, Heater /
Flaker.
(8) Machinery
for the
manufacture of
surgical goods,
sports goods
and stuffed toys.
(9) Machinery
supplied to the
approved
manufacturers /
assemblers of
vehicles, capital
goods,
electronics
equipment and
system,
consumer
durable items
and auto parts.
(10) Marble
processing
industry.
(11) Steel
pipes/tubes
industry.
(12) Machinery
and capital
goods or
engineering
goods meant for
export.
(13) Textile
machinery.
(14) Certain
types of oil and
gas
development
plants.
(15) Machinery,
equipment,
intermediary or
capital goods
and specialized
vehicles (4 x 4
non luxury)
excluding
passenger
vehicles.
(16) Machinery,
equipment,
vehicles and
intermediary or
capital goods.
Supplies to
electric power
generation i.e.
oil, gas, hydel,
coal, wind and
wave energy
projects, their
expansion or
modernization,
including
under
construction
projects, and
captive power
projects.
Supplies
against
international
tender to the
projects
financed out of
international
loan or aid
giving
agencies.
35.
(17) Any other
industrial plant
recommended
and approved by
FBR.
Tyres and tubes.
Nil
(1)
(2)
36.
Tufted carpets.
(1)
(2)
37.
Television sets.
Under EEPAS
Raw Materials
Phenolic Resin
Bead Wire.
Raw Materials
Woven Fabrics of Synthetic
Filament Yarn.
Felt backing.
CKD kits for assembly and
manufacture of TV sets,
comprising of following:-
3909.4000
7217.3010
5%
5%
5407.2000
10%
5603.9300
10%
Nil
(1)
Rubber tube (cut to size).
4009.1190
10%
(2)
Screws.
7318.2290
10%
(3)
Fly back transformer.
8504.3100
10%
(4)
Coil.
8504.5000
10%
(5)
Speaker.
8518.2200
10%
(6)
Core.
8528.7290
10%
(7)
Transmitter r/c.
8529.1090
10%
(8)
(9)
(10)
(11)
(12)
(13)
(14)
(15)
(16)
Resonator
Filter.
Capacitor.
Board, PCB.
Fuses.
Switch.
Holder
Connector
Inductor exil lead, wire,
cord, cable assembly, lead
set, lead wire.
8529.9090
8532.2900
8532.3090
8534.0000
8536.1000
8536.5099
8536.6100
8536.9090
8544.4290
10%
10%
10%
10%
10%
10%
10%
10%
10%
The in-house
facility for
television sets
manufacturing
shall include
the following:(i) Mounting
belt
(ii) Soldering
machine
(iii) Jigs for
technicians
(iv) White
balance
adjuster
(v) Cross
Hatch Pattern
Generator
(vi) Red
Pattern
Generator
(vii)
Microscope for
Purity
Adjustment.
(17)
38.
Under EEPAS.
Cellular mobile
phones; Laser
video disc
players; DVD
player, VCD
player; VCP
(Video Cassette
Player); VCR
(Video Cassette
Recorder);
Compact disc
player; Stereo
car cassettes
players; Hi-fi
system; Pocket
size cassette
player; CD
players; Radiocum-cassette
player; Radio;
Electronic
calculator;
Microwave
ovens; Caller
Line
Identification
(CLI) apparatus,
Plasma T.V
(i)
Adopter, Adhesive tube,
Ana band tube, Antenna,
Back cover, Band, Base,
Bracket, Button, CA mask,
Cap, Case, Chassis
Assembly, Cover Dom,
Cover Mini, Cover shield,
Cover speaker, Clip plug,
Clamps, Cover tuner, CPM,
CPT earth, Crystal,
Cushion, Decoration, Delay
line insulator, Flux, Focus
pack, Frame, Fixture,
Handle, Heat sink, Hook,
Inductors, Jack, Led, Leg,
Lens, Link, Magnet, Mark,
Mirror, Nuts, Panel-Metal,
Piece, Pin, Plate, Plate
compensation, Preamp,
Sheet mechanism, Shield,
Silicon, Socket IC, Socket
Speaker Gap, Speaker grill,
Speaker tweeter tape,
Spring, Stopper, Supporter,
Tie, Tuner, Varistor,
Washer, Wedge, Window,
Window A/B, Wafer, Wax,
Wrap.
Raw materials, subcomponents, components
for the electronic apparatus.
8529.9090
10%
Respective
headings
10%
Nil
sets/LCD Panel
sets / LED Panel
sets.
(ii)
(a)
(1)
(2)
(3)
(b)
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(c)
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(d)
(1)
(2)
(3)
SKD Kits For Assembly Of
Microwave Ovens, VCP,
VCR, VCD, DVD Apparatus
And Plasma T.V. Sets/LCD
Panel Sets / Light Emitting
Diode (LED) Panel sets
Under “Emerging
Electronics Products
Assembly Scheme”
(EEPAS).
Microwave Oven.
Screw set.
Power supply assy.
Lamp.
Car Cassette/Compact
Disc Player.
Screw sets.
Transformer.
Speaker with box.
Accessories.
Braket.
Rear cover assy.
Main frame or chassis with
top cover.
Nobs and buttons.
Front panel assy with
mounted circuit board.
Mechanism assy with motor
and head.
Cable with connector.
HI Fi System
Screw sets.
Transformer.
Speaker with box.
Accessories.
Braket.
Rear cover assy.
Main frame or chassis with
top cover.
Nobs and buttons.
Front panel assy with
mounted circuit board.
Mechanism assy with motor
and head.
Cable with connector.
Stereo Cassette/Stereo
Car Cassette Player.
Screw sets.
Transformer.
Speaker with box.
(i) The
imported SKD
kits would not
contain
packing
materials,
carton boxes,
brochures and
the printed
materials.
7318.1400
8504.5000
8539.2200
15%
15%
15%
7318.1400
8504.3100
8518.2200
8529.9090
8529.9090
8529.9090
8529.9090
15%
15%
15%
15%
15%
15%
15%
8529.9090
8529.9090
15%
15%
8529.9090
15%
8544.4290
15%
7318.1400
8504.3100
8518.2200
8529.9090
8529.9090
8529.9090
8529.9090
15%
15%
15%
15%
15%
15%
15%
8529.9090
8529.9090
15%
15%
8529.9090
15%
8544.4290
15%
7318.1400
8504.3100
8518.2200
15%
15%
15%
(4)
(e)
Cable with connector.
Radio Cassette Player.
8544.4290
15%
(1)
(2)
(3)
(4)
(5)
(6)
(7)
Screw sets.
Transformer.
Speaker with box.
Accessories.
Braket.
Rear cover assy.
Main frame or chassis with
top cover.
Nobs and buttons.
Front panel assy with
mounted circuit board.
Mechanism assy with motor
and head.
Cable with connector.
Pocket Size Cassette
Player.
Screw sets.
Transformer.
Speaker with box.
Cable with connector.
DVD / VCD Player.
Screw sets.
Transformer.
Inner connector.
Outside connector (AC, AV,
RF cable).
Plasma Display Panel
(PDP) / Liquid Crystal
Display (LCD) Panel /
Light Emitting Diode
(LED) Panel.
Screw sets.
Speaker.
Front cabinet assy.
Filter for plasma display or
LCD panel or LED panel
Rear cover assy.
Plasma display or LCD or
LED control unit.
Plasma display panel / LCD
panel / LED panel
Printed circuit board.
AC cable accessories.
Plasma Display Panel
(PDP) / Liquid Crystal
Display (LCD) Panel /
Light Emitting Diode
(LED) Panel
Screw sets
Speaker
Adopter / power supply
7318.1400
8504.3100
8518.2200
8529.9090
8529.9090
8529.9090
8529.9090
15%
15%
15%
15%
15%
15%
15%
8529.9090
8529.9090
15%
15%
8529.9090
15%
8544.4290
15%
7318.1400
8504.3100
8518.2200
8544.4290
15%
15%
15%
15%
7318.1400
8504.3100
8536.9090
8536.9090
15%
15%
15%
15%
7318.1400
8518.2200
8529.9090
8529.9090
10%
10%
10%
10%
8529.9090
8529.9090
10%
10%
8529.9090
10%
8534.0000
8544.4290
10%
10%
7318.1400
8518.2200
8544.4290
10%
10%
10%
(8)
(9)
(10)
(11)
(f)
(1)
(2)
(3)
(4)
(g)
(1)
(2)
(3)
(4)
(h)
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(hi)
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(i)
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
39.
Welded Steel
Pipes
(1)
(2)
(3)
40.
41.
Wire rope, Wire
(High Tensile),
High Carbon
and prestressed
concrete wire/
strands, Core
wire for ACSR
spring wires.
Cold Rolled
Coils (CRC) or
G.I sheet / coils.
42.
Milk Chillers.
43.
Agriculture
Diesel Engines
(Single Cylinder
of 3-36 HP)
(1)
(1)
Rear cover assy
Plasma display or LCD or
LED control unit
Compact panel PDP / LCD /
LED
Printed circuit board
Connecting cables /
accessories
Car Audio System
DC cord.
Housing.
Top plate.
Chassis (bottom plate).
Cassette/CD/MP3/MP4
mechanism assy.
Front sub-panel.
Front panel assy.
Front panel cover.
Insulating sheet.
Heat sink.
Heat sink spacer.
Misc. Hardware.
PC board.
Raw materials, subcomponent and
components.
Welding flux.
Welding wire.
Coated electrodes of base
metal.
High carbon (high tensile)
steel wire rod / Alloy steel
wire rod.
Hot rolled coils / sheets in
prime quality.
Parts and Components
8529.9090
8529.9090
10%
10%
8529.9090
10%
8534.0000
8544.4290
10%
10%
8529.9090
8529.9090
8529.9090
8529.9090
8529.9090
15%
15%
15%
15%
15%
8529.9090
8529.9090
8529.9090
8529.9090
8529.9090
8529.9090
8529.9090
8534.0000
15%
15%
15%
15%
15%
15%
15%
15%
Nil
3810.9000
7217.9000
8311.1000
10%
10%
10%
7227.9000
10%
Nil
72.08
5%
5%
If imported by
sales tax
registered
manufacturers
of CRC / G.I
sheets or coils.
Nil
5%
Nil
5%
5%
5%
(1)
Balancing block.
Respective
headings
8409.9999
(2)
(3)
(4)
Cover sets.
Cylinder block.
Cylinder head.
8409.9999
8409.9999
8409.9999
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
(14)
(15)
(16)
(17)
(18)
(19)
(20)
(21)
44.
Aluminum
Processing
Industry.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
45.
Fans.
(1)
(2)
(3)
(4)
Cylinder head cover.
Cylinder liner
Fly-weight assy.
Intake/exhaust valve &
spring.
Piston
Piston ring set
Valve rocker arm assy.
Fuel Injection pump.
Fuel injector.
Oil pump.
Water pump.
Camshaft.
Crank shaft.
Connecting rod bearing set.
Main bearing set.
Set of bushing.
Gear sets.
Raw materials.
8409.9999
8409.9999
8409.9999
8409.9999
5%
5%
5%
5%
8409.9999
8409.9999
8409.9999
8413.3090
8413.3090
8413.8190
8413.8190
8483.1090
8483.1090
8483.3010
8483.3010
8483.3010
8483.4090
5%
5%
5%
15%
15%
15%
15%
15%
15%
15%
15%
15%
15%
Catalyst SP-561
Coreactant-F
Ethyl Acetate
Foil Lacquer FL 65105A
Hardener
M.G Sulphite Tissue &
Poster paper from 22 to 40
gsm)
Terraflex-T
NC Combi Foil Lacquer
Inner Liner Coating Gold /
Transparent
Insulation Varnish
(Polyurithene / Polyester /
Polyesterimide with Baking
Temperature Ranging from
100C to 220C)
Composite paper and
paperboard (made by
sticking flat layers of paper
or paperboard together with
an adhesive), not surfacecoated or impregnated,
whether or not internally
reinforced, in rolls or sheets.
Paper & Paper Board
Cellusose Wadding & Webs
of Cullulose Fibers, Cated,
Impregnated Covered
Surface
Non Grain Oriented
Electrical Steel Sheet
3814.0000
3907.7000
2915.3100
3208.9090
3208.9090
4802.5400
15%
15%
15%
15%
15%
15%
3209.9090
3208.9090
3208.9090
15%
10%
10%
3208.1010
10%
4807.0000
10%
4811.4900
10%
7225.1900
0%
7226.1900
5%
Nil
Nil
46.
Raw materials.
Recordable
Discs (CDR/DVDR/
DVDR-DL
(DUAL
LAYER)/CD&
DVD
(1)
(2)
Lacquer for CDR/CD
UV bonder for
DVDR/DVDR-DL / DVD
Aluminium Target for
CD/DVD
Stampers
Components
3208.9090
3506.9990
5%
5%
7616.9990
5%
8523.8090
5%
Rubber Key Pad
Current Transformer,
Flyback Transformer
Capacitor
Connector, MOV's /
Varistors
Ferrite Core
Raw materials.
4008.2990
8504.3100
15%
15%
8532.2900
8536.9090
15%
15%
9028.9020
15%
(1)
Folding carton
(2)
Aluminum foil
Raw materials.
4811.4900
4819.2000
7607.2000
(3)
(4)
47.
Electronic
Meters.
(1)
(2)
(3)
(4)
(5)
48.
49.
Nil
Liquid Food
Processing
Industry for dairy
and juices.
Liquid Food
Packaging
Industry for dairy
and juices.
(1)
(2)
(3)
Bleached Kraft Paper (70
gsm) gsm Tolerance (Min
67 / Max 76)
Uncoated duplex liquid
packaging board (150mN /
213 gsm) mN Tolerance
(Min 112 / Max 188) gsm
Tolerance (Min 205 / Max
227), (260mN / 252 gsm)
mN Tolerance (Min 215 /
Max 305) gsm Tolerance
(Min 232 / Max 262)
Clay coated Board (150
mN/229 gsm)mN Tolerance
(Min 120/ Max 180) gsm
Tolerance (Min 221 / Max
241, (260 mN /268 gsm)
mN Tolerance (Min 215 /
Max 305)gsm Tolerance
(Min 258/Max 283)
Nil
Nil
10%
10%
10%
Nil
4804.3900
10%
4804.4900
10%
4804.5900
4805.9290
4805.9390
4810.9200
10%
10%
10%
10%
4810.9900
7607.1100
10%
10%
7607.1100
10%
Nil
Metal Shells
Porcelain Insulator
Raw materials.
Starch
Glue. Adhesives based on
polymers or rubbers
Embossed PVC Sheets/
PVC Lamination Foil
Plaster/ Gypsum Board
Paper
Raw materials.
7304.9000
8546.2000
5%
5%
Nil
3505.1090
3506.9190
10%
10%
3918.1000
10%
4805.9290
10%
(1)
Additives
(2)
Organic Pigments (NonTextile Grade)
Dispersants
Emulsifier
Casein
Cross Linker
3404.9090
3824.9099
3204.1700
5%
5%
5%
3402.1300
3402.1300
3501.1000
3809.9190
5%
5%
5%
5%
2526.2000
2712.2000
2712.9090
3404.9090
5%
5%
5%
5%
3824.9099
5%
3905.1900
5%
(4)
50.
51.
Flexible
Packaging
Laminates
Industries
excluding
Cigarettes
Industries
Spark Plugs
52.
Gypsum Board
(1)
(1)
(2)
(1)
(2)
(3)
(4)
53.
Acrylic/Pigment
Thickener
(3)
(4)
(5)
(6)
54.
Gum Base
(1)
(2)
(3)
(4)
(5)
(6)
55.
56.
Aluminum foil plain (in rolls
of 6.3 micron thickness)
Thickness Tolerance (Min
5.85 / Max 6.75)
Aluminum Foil
Talcum (Food Grade)
Paraffin Wax (Food Grade)
Micro Wax (Food Grade)
Glycerol Mono Stearate
(Food Grade)
Acetic Acid Ester (Food
Grade)
PVA (Poly Vinyl Acetate)
(Food Grade)
Nil
Nil
Polystyrenes
(HIPS, EPS &
GPPS)
Nil
Nil
(1)
(2)
(3)
Pentene
Liquid Paraffin
Uvitex-ob (brightener)
2710.1290
2710.1995
3204.2000
10%
10%
10%
(1)
(2)
Solvent Oil
Para tertio butyl phenolic
resin
2710.1250
3909.4000
5%
5%
Shoe Adhesive
Nil
57.
58.
59.
Linear Alkyl
Benzene
Sulphonic Acid.
Electrolytic Tin
Plate.
Butyl Acetate
(d)
(1)
Linear Alkyl Benzene
3817.0000
0%
Nil
(1)
Tin Mill Black Plate (of
secondary quality)
Sabutol
7209.1810
15%
Nil
3814.0000
10%
Nil.”; and
(1)
in Form-II, in the heading, for the words “Collector of Customs Collectorate”, the
words “Director of IOCO” shall be substituted.
[C. No.1(1)Tar-III/2014]
(Nisar Muhammad)
Additional Secretary