LLC SIOPLAST
7-А, Vasylenko M. street, the city of Kiev, Ukraine
Tel/fax: +38 (044) 364-72-29
E-mail: sioplast.ua@gmail.com
Site: www.sioplast.com.ua
CATALOGUE OF PAINTWORKS TM "Syoplast®"
Organosilicon
KO-168
KO-169
KO-174
Enamel KO-slate
КО-100N
OS-1203
WEATHER-RESISTANT COATINGS
Single-component fast-drying coatings, that has
high resistance to atmospheric action,
temperature differentials from -40°C to +150°C
with
fresh
and
sea
water
periodically
Prices, EUR/kg
2,04
2,13
2,46
2,39
3,13
influencing, with solutions of inorganic acids and
alkalis. It adapts as the finishing layer in the
systems of the anti-corrosive and weatherproof
protection of metallic, wooden and concrete
constructions. It is applied as finishing layer in
the
systems
of
the
anticorrosion
3,26
and
weatherproof protection of metal, wooden and
concrete constructions.
Alkyd
PF-101К
PF-1189/PF-1126
PF-115
GF-92 GHS
PF-218 GHS
PF-132 МR
МL-12
МL-165 hammer
Finishing single-component fast-drying coatings
on the basis of synthetic alkyds.
They have increased water resistance, resistance
to solutions of alkalescence and acids. Also they
have the high mechanical strength of membrane.
1,91
2,09
1,52
2,17
1,96
1,98
3,04
It is intended for decorative protection of
previously rough painted metal constructions,
including of the surfaces, which subject to
abrasive influence (steps, rails, areas and so
2,78
forth). It can be put in thickness to 100 mkm per
one layer.
Alkyd-urethane
АU-199
URF-1128
Single-component
fast-drying
finishing
2,96
protective-decorative coatings. They are intended
as finishing layer in the systems of weatherproof
protective-decorative painting of articles which
are made of ferrous metals and their moulds.
3,04
They have high endurance to UV radiation and
temperature differentiates (-40 to +60°C).
Polyvinyl chloride
HV-16
HV-110
HV-124
HV-125
HV-1100/HV-1120
HS-1169
HV-518
HS-5400
Finishing
single-component
weatherproof
coatings on the basis of modified vinyl chloride
conjoint polymers. They have high endurance to
different types of chemical agents consisting
industrial atmosphere. They are intended to
2,17
2,15
2,23
3,70
2,17
2,60
2,83
protect metal constructions and concrete bottoms
used under the atmospheric conditions, which are
subject
to
industrial
atmosphere
of
3.4.5
2,48
category.
Acrylic
АS-182
АК-125 ОTSМ
Single-component coatings. They are used in
2,74
systems of anticorrosion surface protection of
ferrous and colored metals which are subject to
2,83
open atmosphere.
Epoxide
EP-140 (100:25)
EP-1236
EP-1155
Two-component epoxide finishing coatings for
painting previously grounded surfaces from the
3,04
3,09
ferrous and nonferrous metals. They have high
anticorrosive
properties,
weather
resistance,
resistance to water, short-term action of mineral
oils, gasoline, cleaning agents.
3,13
CHEMICALLY RESISTENT COATINGS
Polyvinyl chloride
HS-710/HS-720
HS-717
HS-759 (100:3)
HV-785
The single-component chemically resistant
coatings, which have resistance to different
2,83
2,79
3,69
2,78
types of chemical agents in the liquid and
gaseous form. They adapt for the protection
of metal constructions and concrete bases of
the exploiting under a constant influence
2,15
solutions of inorganic acids, alkalis, gaseous
industrial pollution with temperature to +60°
C.
Organ silicate
ОS-5103
It has high resistance to atmospheric action,
drops in temperatures -40 to +200°C to
industrial gases, vapors of inorganic acids
3,87
and alkalis.
Epoxide
EP-773 (100:4)
EP-5B (100:4)
EP-21 (100:2,5)
EP-41 (100:4,5)
EP-525 B (100:3)
EP-574 B (100:3)
BEP-0237 (100:10)
Two-component
resistant,
oilbenzo
epoxide
resistant
chemically
finishing
coatings. They adapt for painting the
previously grounded metal and nonmetall
2,83
2,83
3,69
2,78
2,87
2,83
surfaces of structures indoors and external
surfaces, for painting the concrete bases.
They have high anticorrosive properties,
weather resistance, resistance to water,
5,22
mineral oils, gasoline, cleaning agents and
so forth.
HEAT RESISTANT COATINGS
Single-component and two-component heat-
КО-84 +300°
КО-811 +400°
resistance coverings on the basis of the
КО-813 +400°+500°
organorastvorimykh
polymers,
КО-814 +300°
КО-828 +400°
thermoresistant pigments and special
КО-868 +600°
Thermacole +600°
4,56
4,52
6,09
4,26
4,52
4,78
6,48
additives in the organic solvents.
They adapt for the surface protection of
articles made of the ferrous and nonferrous
metals, and also the mineral bases from the
action
of
thermal
degradation
and/or
overheated gases at a temperature from
+200 to +600°C. Basic application: flues,
exhaust systems, the external surface of
furnaces and boiler equipment, etc.
КО-5102
HS-558
UR-5101 (100:4)
COATINGS FOR FOOD INDUSTRY
They are intended for the protection of
metallic, concrete, ferroconcrete and other
3,70
2,60
surfaces, for the dyeing and the repair work
of industrial equipment, internal surfaces of
storage tanks and transport of foodstuffs,
3,04
drinkable and industrial water, petroleum
products, conduits and so forth.
АС-554
АС-071
АС-528
FLUORESCENT COMPLEX
They adapt in the complex coating, for the
purpose of protection from surface blush,
8,04
2,96
which work in the atmospheric conditions.
Under the conditions of the moderate and
cold
climate
preserve
shielding
and
decorative properties during not less than 5
years.
ХС-413
HS-416
HS-436 (100:02)
HS-519
HS-5226
EP-46
PF-167
VL-515
COATINGS FOR SHIPPING
Coatings are intended for the protectivedecorative painting of previously grounded
surfaces, for painting the external surfaces
of the vessels of the unlimited region of
floating,
launches.
For
the
corrosion
2,78
2,72
2,60
2,78
2,78
2,74
1,65
2,60
protection
of
the
above-water
and
underwater part of the hulls of the ship,
including the vessels of ice floating.
АК-501 Г
EP-5155
АU-066
AK-070
VL-02, VL-023
FL-03K, FL-03ZH
HS-04
HS-010, HS-068
PF-0244
GF-021
HS-059
KO-080
KO-084 GHS
EP-0199, EP-0280
HV-0278
АК-100 ZHTS
EP-057
ROAD MARKING COATINGS
Single-component coatings are intended for
the horizontal marking of roadway of motor
roads I and II category. AK-501G is
approved by GP “DerzhdorNDI” and by
DNTTS “of DORYAKІST”.
UNDERCOATS
Single-component and two-component
undercoats. They adapt as the base coat for
the mineral bases, the surfaces from the
ferrous and nonferrous metals. They are
used as primary layer, for the preliminary
surface preparation, in the systems of
weatherproof and chemical steady protective
coatings, and just as independent coating, in
the system for varnish-and-paint corrosion
protection of metallic surfaces in the locked
and hard ventilated capacities, which are
exploited under the conditions of the action
of sea and fresh water.
ZINK ADDITIVE COATINGS
Coatings, in their properties are similar to
1,80
2,17
2,17
2,95
2,82
2,26
2,22
2,26
1,70
1,22
2,52
2,26
2,26
2,52
2,17
5,22
the coating, received in result of hot
galvanizing. High content of zinc metal
makes it possible to use material so as to
create protective coating of metal structures
5,43
of water-engineering, bridge constructions
and capacities for petroleum products, the
conduits and so forth.
ЭП-0010, ЭП-0020
PF-0020
HV-004
FILLER COATINGS
They are intended to level metal and not
metal surfaces. They are also used as prime
colour for top coats and for weatherproof
and chemically resistant systems.
CLEARCOATS
2,82
1,74
1,78
HS-724
HS-76
HV-784
EP-730
EP-074
Clearcoat AK-113
Clearcoats KO
They can be used in the integrated systems
destructive influence of atmospheric agents,
2,83
2,87
2,80
3,48
3,78
increased
2,91
of coatings or as independent protective
layer. They are used to protect articles from
temperatures
and
chemical
aggressive substances, as well as decorative
if so agreed
finish of surface. Some clearcoats are used
as electric insulating materials.
Prices are indicated upon the terms of FCA according to international rules
Incoterms 2010. They are not final and can be clarified depending on quantity,
color and customs conditions.