ASTM STANDARDS REFERENCED IN THE
NRC REGULATORY GUIDES
Power Reactors (Division 1)
1.14 Reactor Coolant Pump Flywheel Integrity
A01 on Steel, Stainless Steel, and Related Alloys
A20 Standard Specification for General Requirements for Steel Plates for Pressure
Vessels
E08 on Fatigue and Fracture
E399 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness K Ic of
Metallic Materials
1.21 Measuring, Evaluating, and Reporting Radioactive Material in Liquid and
Gaseous Effluents and Solid Waste
D19 on Water
D3370 Standard Practices for Sampling Water from Closed Conduits
E11 on Quality and Statistics
E29 Standard Practice for Using Significant Digits in Test Data to Determine
Conformance with Specifications
1.35 Inservice Inspection of Ungrouted Tendons in Prestressed Concrete
Containments
D02 on Petroleum Products and Lubricants
D95 Standard Test Method for Water in Petroleum Products and Bituminous Materials
by Distillation
D974 Standard Test Method for Acid and Base Number by Color-Indicator Titration
D19 on Water
D512 Standard Test Methods for Chloride Ion In Water
D3867 Standard Test Methods for Nitrite-Nitrate in Water
Withdrawn Standard
D992 Method of Test for Nitrate Ion in Water (Withdrawn 1983)
1.35.1 Determining Prestressing Forces for Inspection of Prestressed Concrete
Containments
Committee C09 on Concrete and Concrete Aggregates
C512 Standard Test Method for Creep of Concrete in Compression
1.36 Nonmetallic Thermal Insulation for Austenitic Stainless Steel
Committee D19 on Water
D512 Standard Test Methods for Chloride Ion in Water
D1179 Standard Test Methods for Fluoride Ion in Water
Committee E01 on Analytical Chemistry for Metals, Ores, and Related Materials
E60 Standard Practice for Analysis of Metals, Ores, and Related Materials by Molecular
Absorption Spectrometry
Committee C16 on Thermal Insulation
C692 Standard Test Method for Evaluating the Influence of Thermal Insulations on
External Stress Corrosion Cracking Tendency of Austenitic Stainless Steel
Withdrawn Standards
E62 Standard Test Methods for Chemical Analysis of Copper and Copper Alloys
(Photometric Methods) (Withdrawn 2010)
E120 Standard Test Methods for Chemical Analysis of Titanium and Titanium Alloys
(Withdrawn 2003)
E146 Methods of Chemical Analysis of Zirconium and Zirconium Alloys (Silicon,
Hydrogen, and Copper) (Withdrawn 1989)
1.44 Control of the Use of Sensitized Stainless Steel
A01 on Steel, Stainless Steel, and Related Alloys
A262 Standard Practices for Detecting Susceptibility to Intergranular Attack in
Austenitic Stainless Steels
1.52 Design, Inspection, and Testing Criteria for Air Filtration and Adsorption Units
of Post-Accident Engineered-Safety-Feature Atmosphere Cleanup Systems in LightWater-Cooled Nuclear Power Plants
Committee D28 on Activated Carbon
D3803 Standard Test Method for Nuclear-Grade Activated Carbon
1.54 Service Level I, II, and III Protective Coatings Applied to Nuclear Power Plants
Committee D33 on Protective Coating and Lining Work for Power Generation Facilities
D3843 Standard Practice for Quality Assurance for Protective Coatings Applied to
Nuclear Facilities
D4256 Test Method for Determination of the Decontaminability of Coatins Used in
Light-Water Nuclear Power Plants (Withdrawn 1995)
D3911 Standard Test Method for Evaluating Coatings Used in Light-Water Nuclear
Power Plants at Simulated Design Basis Accident (DBA) Conditions
D5144 Standard Guide for Use of Protective Coating Standards in Nuclear Power Plants
D4538 Standard Terminology Relating to Protective Coating and Lining Work for Power
Generation Facilities
D4537 Standard Guide for Establishing Procedures to Qualify and Certify Personnel
Performing Coating Work Inspection in Nuclear Facilities
D5163 Standard Guide for Establishing a Program for Condition Assessment of Coating
Service Level I Coating Systems in Nuclear Power Plants
D7167 Standard Guide for Establishing Procedures to Monitor the Performance of
Safety-Related Coating Service Level III Lining Systems in an Operating Nuclear Power Plant
D5139 Standard Specification for Sample Preparation for Qualification Testing of
Coatings to be Used in Nuclear Power Plants
D4082 Standard Test Method for Effects of Gamma Radiation on Coatings for Use in
Nuclear Power Plants
D3912 Standard Test Method for Chemical Resistance of Coatings and Linings for Use
in Nuclear Power Plants
D5498 Standard Guide for Developing a Training Program for Personnel Performing
Coating Work Inspection for Nuclear Facilities
D7108 Standard Guide for Establishing Qualifications for a Nuclear Coatings Specialist
D4286 Standard Practice for Determining Coating Contractor Qualifications for Nuclear
Powered Electric Generation Facilities
D4227 Standard Practice for Qualification of Coating Applicators for Application of
Coatings to Concrete Surfaces
D4228 Standard Practice for Qualification of Coating Applicators for Application of
Coatings to Steel Surfaces
D7491 Standard Guide for Management of Non-Conforming Coatings in Coating
Service Level I Areas of Nuclear Power Plants
Committee D01 on Paint and Related Coatings, Materials, and Applications
D6677 Standard Test Method for Evaluating Adhesion by Knife
D7234 Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete
Using Portable Pull-Off Adhesion Testers
D4541 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion
Testers
1.65 Materials and Inspections for Reactor Vessel Closure Studs
A01 on Steel, Stainless Steel, and Related Alloys
A540 Standard Specification for Alloy-Steel Bolting for Special Applications
1.72 Spray Pond Piping Made from Fiberglass-Reinforced Thermosetting Resin
Committee F17 on Plastic Piping Systems
D1599 Standard Test Method for Resistance to Short-Time Hydraulic Pressure of
Plastic Pipe, Tubing, and Fittings
Committee D20 on Plastics
D2992 Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for
"Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings
1.78 Evaluating the Habitability of a Nuclear Power Plant Control Room During a
Postulated Hazardous Chemical Release
Committee E06 on Performance of Buildings
E741 Standard Test Method for Determining Air Change in a Single Zone by Means of
a Tracer Gas Dilution
1.84 Design, Fabrication, and Materials Code Case Acceptability, ASME Section III
A01 on Steel, Stainless Steel, and Related Alloys
A262 Standard Practices for Detecting Susceptibility to Intergranular Attack in
Austenitic Stainless Steels
A276 Standard Specification for Stainless Steel Bars and Shapes
A352 Standard Specification for Steel Castings, Ferritic and Martensitic, for PressureContaining Parts, Suitable for Low-Temperature Service
A479 Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and
Other Pressure Vessels
A500 Standard Specification for Cold-Formed Welded and Seamless Carbon Steel
Structural Tubing in Rounds and Shapes
A501 Standard Specification for Hot-Formed Welded and Seamless Carbon Steel
Structural Tubing
A564 Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless
Steel Bars and Shapes
A572 Standard Specification for High-Strength Low-Alloy Columbium-Vanadium
Structural Steel
A743 Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel,
Corrosion Resistant, for General Application
A710 Standard Specification for Precipitation-Strengthened Low-Carbon NickelCopper-Chromium-Molybdenum-Columbium Alloy Structural Steel Plates
Committee F17 on Plastic Piping Systems
D1599 Standard Test Method for Resistance to Short-Time Hydraulic Pressure of
Plastic Pipe, Tubing, and Fittings
Committee B05 on Copper and Copper Alloys
B271 Standard Specification for Copper-Base Alloy Centrifugal Castings
B151 Standard Specification for Copper-Nickel-Zinc Alloy (Nickel Silver) and CopperNickel Rod and Bar
B61 Standard Specification for Steam or Valve Bronze Castings
Committee B09 on Metal Powders and Metal Powder Products
B525 Specification for Sintered Austenitic Stainless Steel Structural Parts (Withdrawn
1989 and Replaced by B783)
Committee B10 on Reactive and Refractory Metals and Alloys
B363 Standard Specification for Seamless and Welded Unalloyed Titanium and
Titanium Alloy Welding Fittings
Withdrawn Standard
A708 Practice for Detection of Susceptibility to Intergranular Corrosion in Severely
Sensitized Austenitic Stainless Steel (Withdrawn 1988)
1.90 Inservice Inspection of Prestressed Concrete Containment Structures with
Grouted Tendons
Committee C09 on Concrete and Concrete Aggregates
C597 Standard Test Method for Pulse Velocity through Concrete
1.99 Radiation Embrittlement of Reactor Vessel Materials
A01 on Steel, Stainless Steel, and Related Alloys
A533 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and
Tempered, Manganese-Molybdenum and Manganese-Molybdenum-Nickel
Committee E10 on Nuclear Technology and Applications
E185 Standard Practice for Design of Surveillance Programs for Light-Water Moderated
Nuclear Power Reactor Vessels
E693 Standard Practice for Characterizing Neutron Exposures in Iron and Low Alloy
Steels in Terms of Displacements Per Atom (DPA), E 706(ID)
1.107 Qualifications for Cement Grouting for Prestressing Tendons in Containment
Structures
Committee C01 on Cement
C150 Standard Specification for Portland Cement
C191 Standard Test Methods for Time of Setting of Hydraulic Cement by Vicat Needle
C109 Standard Test Method for Compressive Strength of Hydraulic Cement Mortars
(Using 2-in. or [50-mm] Cube Specimens)
Committee C09 on Concrete and Concrete Aggregates
C260 Standard Specification for Air-Entraining Admixtures for Concrete
C494 Standard Specification for Chemical Admixtures for Concrete
Committee D19 on Water
D512 Standard Test Methods for Chloride Ion in Water
D516 Standard Test Method for Sulfate Ion in Water
D596 Standard Guide for Reporting Results of Analysis of Water
D1129 Standard Terminology Relating to Water
D1293 Standard Test Methods for pH of Water
Withdrawn Standard
D992 Method of Test for Nitrate Ion in Water (Withdrawn 1983)
1.132 Site Investigations for Foundations of Nuclear Power Plants
Committee D18 on Soil and Rock
D5092 Standard Practice for Design and Installation of Ground Water Monitoring Wells
1.137 Fuel-Oil Systems for Standby Diesel Generators
Committee D02 on Petroleum Products and Lubricants
D975 Standard Specification for Diesel Fuel Oils
D270 Methods of Sampling Petroleum and Petroleum Products (Withdrawn 1982 and
Replaced by D4057 and D4177)
1.138 Laboratory Investigations of Soils and Rocks for Engineering Analysis and
Design of Nuclear Power Plants
Committee C09 on Concrete and Concrete Aggragates
C127 Standard Test Method for Density, Relative Density (Specific Gravity), and
Absorption of Corse Aggregate
C128 Standard Test Method for Density, Relative Density (Specific Gravity), and
Absorption of Fine Aggregate
C294 Standard Descriptive Nonmenclature for Constitutes of Concrete Aggregate
C535 Standard Test Method for Resistance to Degradation of Large-Size Coarse
Aggregate by Abrasion and Impact in the Los Angeles Machine
Committee D18 on Soil and Rock
D4753 Standard Guide for Evaluating, Selecting, and Specifying Balances and
Standard Masses for Use in Soil, Rock, and Construction Materials Testing
D3740 Standard Practice for Minimum Requirements for Agencies Engaged in Testing
and/or Inspection of Soil and Rock as Used in Engineering Design and Construction
D4220 Standard Practices for Preserving and Transporting Soil Samples
D2488 Standard Practice for Description and Identification of Soils (Visual-Manual
Procedure)
D4452 Standard Practice for X-Ray Radiography of Soil Samples
D2487 Standard Practice for Classification of Soils for Engineering Purposes (Unified
Soil Classification System)
D5878 Standard Guides for Using Rock-Mass Classification Systems for Engineering
Purposes
D4015 Standard Test Methods for Modulus and Damping of Soils by Resonant-Column
Method
D421 Standard Practice for Dry Preparation of Soil Samples for Particle-Size
Analysis and Determination of Soil Constants
D422 Standard Test Method for Particle-Size Analysis of Soils
D425 Standard Test Method for Centrifuge Moisture Equivalent of Soils
D698 Standard Test Methods for Laboratory Compaction Characteristics of Soil
Using Standard Effort (12,400 ft-lbf/ft3 (600 kN-m/m3)
D854 Standard Test Methods for Specific Gravity of Soil Solids by Water
Pycnometer
D1140 Standard Test Methods for Amount of Material in Soils Finer than the No. 200
(75-um) Sieve
D1557 Test Method for Laboratory Compaction Characteristics of Soil Using
Modified Effort (56,000 ft-lbf/ft3 (2,700kN-m/m3))
D1558 Standard Test Method for Moisture Content Penetration Resistance
Relationships of Fine-Grained Soils
D2166 Standard Test Method for Unconfined Compressive Strength of Cohesive Soil
D2216 Standard Test Method for Laboratory Determination of Water (Moisture)
Content of Soil and Rock by Mass
D2434 Standard Test Method for Permeability of Granular Soils (Constant
Head)
D2435 Standard Test Method for One-Dimensional Consolidation Properties of
Soils
D2664 Standard Test Method for Triaxial Compressive Strength of Undrained Rock
Core Specimens without Pore Pressure Measurements (Withdrawn 2004 and Replaced by
D7012)
D2845 Standard Test Method for Laboratory Determination of Pulse Velocities and
Ultrasonic Elastic Constants of Rock
D2850 Standard Test Method for Unconsolidated-Undrained Triaxial
Compression Test on Cohesive Soils
D2936 Standard Test Method for Direct Tensile Strength of Intact Rock Core
Specimens
D2938 Standard Test Method for Unconfined Compressive Strength of Intact Rock
Core Specimens (Withdrawn and Replaced by D7012)
D2974 Standard Test Methods for Moisture, Ash, and Organic Matter of Peat and Other
Organic Soils
D3080 Standard Test Method for Direct Shear Test of Soils under Consolidated
Drained Conditions
D3148 Standard Test Method for Elastic Moduli of Intact Rock Core Specimens in
Uniaxial Compression (Withdrawn and Replaced by D7012)
D3967 Standard Test Method for Splitting Tensile Strength of Intact Rock Core
Specimens
D3999 Standard Test Methods for the Determination of the Modulus and
Damping Properties of Soils Using the Cyclic Triaxial Apparatus
D4186 Standard Test Method for One-Dimensional Consolidation Properties
of Soils Using Controlled-Strain Loading
D4221 Standard Test Method for Dispersive Characteristics of Clay Soil by Double
Hydrometer
D4253 Standard Test Methods for Maximum Index Density and Unit Weight of Soils
Using a Vibratory Table
D4254 Standard Test Methods for Minimum Index Density and Unit Weight of Soils
and Calculation of Relative Density
D4318 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of
Soils
D4404 Standard Test Methods of Pore Volume and Pore Volume Distribution of
Soil and Rock by Mercury Intrusion Porosimetry
D4405 Standard Test Methods for Creep of Cylindrical Soft Rock Core Specimens in
Uniaxial Compressions (Withdrawn 2005 and Replaced by D7070)
D4452 Standard Methods for X-Ray Radiography of Soil Samples
D4525 Standard Test Method for Permeability of Rocks by Flowing Air
D4542 Standard Test Method for Pore Water Extraction and Determination of the
Soluble Salt Content of Soils by Refractometer
D4612 Standard Practice for Calculating Thermal Diffusivity of Rocks
D4643 Standard Test Method for Determination of Water (Moisture) Content of Soil by
the Microwave Oven Method
D4644 Standard Test Method for Slake Durability of Shales and Similar Weak
Rocks
D4647 Standard Test Method for Identification and Classification of Dispersive
Clay Soils by the Pinhole Test
D4767 Standard Test Method for Consolidated Undrained Triaxial Compression Test
for Cohesive Soils
D4943 Standard Test Method for Shrinkage Factors of Soils by the Wax Method
D4959 Standard Test Method for Determination of Water (Moisture) Content of Soil
by Direct Heating
D5080 Standard Test Method for Rapid Determination of Percent Compaction
D5084 Standard Test Methods for Measurement of Hydraulic Conductivity of
Saturated Porous Materials Using a Flexible Wall Permeameter
D5311 Standard Test Method for Load Controlled Cyclic Triaxial Strength of Soil
D5407 Standard Test Method for Elastic Moduli of Undrained Intact Rock Core
Specimens in Triaxial Compression without Pore Pressure Measurement (Withdrawn 2005 and
Replaced by D7012)
D5550 Standard Test Method for Specific Gravity of Soil Solids by Gas
Pycnometer
D5607 Standard Test Method for Performing Laboratory Direct Shear Strength Tests
of Rock Specimens Under Constant Normal Force
Withdrawn Standards
D2217 Standard Practice for Wet Preparation of Soil Samples for Particle-Size Analysis
and Determination of Soil Constants (Withdrawn 2007)
D427 Test Method for Shrinkage Factors of Soils by the Mercury Method (Withdrawn
2008)
1.140 Design, Inspection, and Testing Criteria for Air Filtration and Adsorption Units
of Normal Atmosphere Cleanup Systems in Light-Water-Cooled Nuclear Power Plants
Committee D28 on Activated Carbon
D3803 Standard Test Method for Nuclear-Grade Activated Carbon
1.142 Safety-Related Concrete Structures for Nuclear Power Plants (Other than
Reactor Vessels and Containments)
General Reference to ASTM Concrete Standards
1.143 Design Guidance for Radioactive Waste Management Systems, Structures, and
Components Installed in Light-Water-Cooled Nuclear Power Plants
Committee A01 on Steel, Stainless Steel, and Related Alloys
A36 Standard Specification for Carbon Structural Steel
A500 Standard Specification for Cold-Formed Welded and Seamless Carbon Steel
Structural Tubing in Rounds and Shapes
A795 Standard Specification for Black and Hot-Dipped Zinc-Coated (Galvanized)
Welded and Seamless Steel Pipe for Fire Protection Use
Committee A04 on Iron Castings
A571 Standard Specification for Austenitic Ductile Iron Castings for PressureContaining Parts Suitable for Low-Temperature Service
Committee B05 on Copper and Copper Alloys
B359 Standard Specification for Copper and Copper-Alloy Seamless Condenser and
Heat Exchanger Tubes with Integral Fins
Committee F25 on Ships and Marine Technology
F856 Standard Practice for Mechanical Symbols, Shipboard—Heating, Ventilation, and
Air Conditioning (HVAC)
Committee C16 on Thermal Insulation
C1290 Standard Specification for Flexible Fibrous Glass Blanket Insulation Used to
Externally Insulate HVAC Ducts
Committee B08 on Metallic and Inorganic Coatings
B633 Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel
1.161 Evaluation of Reactor Pressure Vessels with Charpy Upper-Shelf Energy Less
Than 50 Ft-Lb
Committee E10 on Nuclear Technology and Applications
E185 Standard Practice for Design of Surveillance Programs for Light-Water Moderated
Nuclear Power Reactor Vessels
Committee E08 on Fatigue and Fracture
E1152 Test Method for Determining J-R Curves (Withdrawn 1997 and Replaced by
E1828)
1.162 Format and Content of Report for Thermal Annealing of Reactor Pressure
Vessels
Committee E10 on Nuclear Technology and Applications
E509 Standard Guide for In-Service Annealing of Light-Water Moderated Nuclear
Reactor Vessels
E185 Standard Practice for Design of Surveillance Programs for Light-Water Moderated
Nuclear Power Reactor Vessels
E1253 Standard Guide for Reconstitution of Irradiated Charpy-Sized Specimens
Committee E08 on Fatigue and Fracture
E399 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness K Ic of
Metallic Materials
Committee E28 on Mechanical Testing
E23 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
1.189 Fire Protection for Nuclear Power Plants
Committee E05 on Fire Standards
E84 Standard Test Method for Surface Burning Characteristics of Building Materials
E119 Standard Test Methods for Fire Tests of Building Construction and Materials
E814 Standard Test Method for Fire Tests of Penetration Firestop Systems
D2859 Standard Test Method for Ignition Characteristics of Finished Textile Floor
Covering Materials
Committee D05 on Coal and Coke
D3286 Standard Test Method for Gross Calorific Value of Coal and Coke by the
Isoperibol Bomb Calorimeter (Withdrawn 2000 and Replaced by D5865)
1.190 Calculational and Dosimetry Methods for Determining Pressure Vessel Neutron
Fluence
Committee E10 on Nuclear Technology and Applications
E1018 Standard Guide for Application of ASTM Evaluated Cross Section Data File,
Matrix E 706 (IIB)
E482 Standard Guide for Application of Neutron Transport Methods for Reactor Vessel
Surveillance, E706 (IID)
E2005 Standard Guide for Benchmark Testing of Reactor Dosimetry in Standard and
Reference Neutron Fields
E844 Standard Guide for Sensor Set Design and Irradiation for Reactor Surveillance, E
706(IIC)
E181 Standard Test Methods for Detector Calibration and Analysis of Radionuclides
E854 Standard Test Method for Application and Analysis of Solid State Track Recorder
(SSTR) Monitors for Reactor Surveillance, E706(IIIB)
E910 Standard Test Method for Application and Analysis of Helium Accumulation
Fluence Monitors for Reactor Vessel Surveillance, E706 (IIIC)
E693 Standard Practice for Characterizing Neutron Exposures in Iron and Low Alloy
Steels in Terms of Displacements Per Atom (DPA), E 706(ID)
E944 Standard Guide for Application of Neutron Spectrum Adjustment Methods in
Reactor Surveillance, E706 (IIA)
E705 Standard Test Method for Measuring Reaction Rates by Radioactivation of
Neptunium-237
E1297 Standard Test Method for Measuring Fast-Neutron Reaction Rates by
Radioactivation of Niobium
E704 Standard Test Method for Measuring Reaction Rates by Radioactivation of
Uranium-238
E264 Standard Test Method for Measuring Fast-Neutron Reaction Rates by
Radioactivation of Nickel
E263 Standard Test Method for Measuring Fast-Neutron Reaction Rates by
Radioactivation of Iron
E526 Standard Test Method for Measuring Fast-Neutron Reaction Rates by
Radioactivation of Titanium
E523 Standard Test Method for Measuring Fast-Neutron Reaction Rates by
Radioactivation of Copper
E844 Standard Guide for Sensor Set Design and Irradiation for Reactor Surveillance, E
706(IIC)
E1005 Standard Test Method for Application and Analysis of Radiometric Monitors for
Reactor Vessel Surveillance, E 706(IIIA)
E2006 Standard Guide for Benchmark Testing of Light Water Reactor Calculations
E261 Standard Practice for Determining Neutron Fluence, Fluence Rate, and Spectra
by Radioactivation Techniques
1.191 Fire Protection Program for Nuclear Power Plants during Decommissioning
and Permanent Shutdown
Committee E05 on Fire Standards
E84 Standard Test Method for Surface Burning Characteristics of Building Materials
1.193 ASME Code Cases Not Approved for Use
Committee A04 on Iron Castings
A874 Standard Specification for Ferritic Ductile Iron Castings Suitable for LowTemperature Service
Committee B02 on Nonferrous Metals and Alloys
B932 Standard Specification for Low-Carbon Nickel-Chromium-MolybdenumGadolinium Alloy Plate, Sheet, and Strip
1.197 Demonstrating Control Room Envelope Integrity at Nuclear Power Reactors
Committee E06 on Performance of Buildings
E741 Standard Test Method for Determining Air Change in a Single Zone by Means of
a Tracer Gas Dilution
1.199 Anchoring Components and Structural Supports in Concrete
Committee E06 on Performance of Buildings
E488 Standard Test Methods for Strength of Anchors in Concrete and Masonry
Elements
1.208 A Performance-Based Approach to Define the Site-Specific Earthquake Ground
Motion
Reference to D18 standards in Book of Standards: Volume 04.08
Fuels and Materials Facilities (Division 3)
3.37 Guidance for Avoiding Intergranular Corrosion and Stress Corrosion in
Austenitic Stainless Steel Components of Fuel Reprocessing Plants (for Comment)
Committee A01 on Steel, Stainless Steel, and Related Alloys
A262 Standard Practices for Detecting Susceptibility to Intergranular Attack in
Austenitic Stainless Steels
3.64 Calculation of Radon Flux Attenuation by Earthen Uranium Mill Tailings Covers
Committee D18 on Soil and Rock
D698 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using
Standard Effort (12 400 ft-lbf/ft3 (600 kN-m/m3))
3.73 Site Evaluations and Design Earthquake Ground Motion for Dry Cask
Independent Spent Fuel Storage and Monitored Retrievable Storage Installations
Reference to D18 standards in Book of Standards: Volume 04.08
Environmental and Siting (Division 4)
4.15 Quality Assurance for Radiological Monitoring Programs (Inception through
Normal Operations to License Termination) -- Effluent Streams and the Environment
Committee D19 on Water
D7282 Standard Practice for Set-up, Calibration, and Quality Control of Instruments
Used for Radioactivity Measurements
4.16 Monitoring and Reporting Radioactivity in Releases of Radioactive Materials in
Liquid and Gaseous Effluents from Nuclear Fuel Processing and Fabrication Plants
and Uranium Hexafluoride Production Plants
Committee D22 on Air Quality
D3685 Standard Test Methods for Sampling and Determination of Particulate Matter in
Stack Gases
4.17 Standard Format and Content of Site Characterization Plans for High-LevelWaste Geologic Repositories
General reference to ASTM
Materials and Plant Protection (Division 5)
5.5 Standard Methods for Chemical, Mass Spectrometric, and Spectrochemical
Analysis of Nuclear-Grade Uranium Dioxide Powders and Pellets
Committee C26 on Nuclear Fuel Cycle
C696 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical
Analysis of Nuclear-Grade Uranium Dioxide Powders and Pellets
5.10 Selection and Use of Pressure-Sensitive Seals on Containers for Onsite Storage
of Special Nuclear Material
Committee D20 on Plastics
D543 Standard Practices for Evaluating the Resistance of Plastics to Chemical
Reagents
Committee D10 on Packaging
D2860 Standard Test Method for Adhesion of Pressure-Sensitive Tape to Fiberboard at
90 Angle and Constant Stress
5.11 Nondestructive Assay of Special Nuclear Material Contained in Scrap and Waste
Withdrawn Standard
C853 Test Method for Nondestructive Assay of Special Nuclear Material Contained in
Scrap and Waste (Withdrawn 1992)
5.34 Nondestructive Assay for Plutonium in Scrap Material by Spontaneous Fission
Detection
Withdrawn Standard
C853 Test Method for Nondestructive Assay of Special Nuclear Material Contained in
Scrap and Waste (Withdrawn 1992)
5.36 Recommended Practice for Dealing with Outlying Observations
Committee E11 on Quality and Statistics
E178 Standard Practice for Dealing with Outlying Observations
5.39 General Methods for the Analysis of Uranyl Nitrate Solutions for Assay, Isotopic
Distribution, and Impurity Determinations
Committee C26 on Nuclear Fuel Cycle
C799 Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical,
Nuclear, and Radiochemical Analysis of Nuclear-Grade Uranyl Nitrate Solutions
5.53 Qualification, Calibration, and Error Estimation Methods for Nondestructive
Assay
Committee E11 on Quality and Statistics
E178 Standard Practice for Dealing with Outlying Observations
Transportation (Division 7)
7.6 Design Criteria for the Structural Analysis of Shipping Cask Containment Vessels
General reference to ASTM standards
7.11 Fracture Toughness Criteria of Base Material for Ferritic Steel Shipping Cask
Containment Vessels with a Maximum Wall Thickness of 4 Inches (0.1 m)
Committee A01 on Steel, Stainless Steel, and Related Alloys
A36 Standard Specification for Carbon Structural Steel
A516 Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderateand Lower-Temperature Service
A709 Standard Specification for Structural Steel for Bridges
A662 Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon
Steel, for Moderate and Lower Temperature Service
A441 Specification for High-Strength Low-Alloy Structural Manganese Vanadium Steel
(Withdrawn in 1988 and Replaced by A572)
A537 Standard Specification for Pressure Vessel Plates, Heat-Treated, CarbonManganese-Silicon Steel
A533 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and
Tempered, Manganese-Molybdenum and Manganese-Molybdenum-Nickel
A588 Standard Specification for High-Strength Low-Alloy Structural Steel, up to 50 ksi
[345 MPa] Minimum Yield Point, with Atmospheric Corrosion Resistance
A736 Standard Specification for Pressure Vessel Plates, Low-Carbon Age-Hardening
Nickel-Copper-Chromium-Molybdenum-Columbium and Nickel-Copper-ManganeseMolybdenum-Columbium Alloy Steel
A514 Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy
Steel Plate, Suitable for Welding
A517 Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength,
Quenched and Tempered
A508 Standard Specification for Quenched and Tempered Vacuum-Treated Carbon and
Alloy Steel Forgings for Pressure Vessels
A543 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and
Tempered Nickel-Chromium-Molybdenum
A203 Standard Specification for Pressure Vessel Plates, Alloy Steel, Nickel
A353 Standard Specification for Pressure Vessel Plates, Alloy Steel, Double-Normalized
and Tempered 9 % Nickel
A553 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and
Tempered 8 and 9 Percent Nickel
A645 Standard Specification for Pressure Vessel Plates, Five Percent Nickel Alloy Steel,
Specially Heat Treated
Committee C11 on Gypsum and Related Building Materials and Systems
C11 Standard Terminology Relating to Gypsum and Related Building Materials and
Systems
Committee E28 on Mechanical Testing
E23 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
E208 Standard Test Method for Conducting Drop-Weight Test to Determine NilDuctility Transition Temperature of Ferritic Steels
E604 Standard Test Method for Dynamic Tear Testing of Metallic Materials
Withdrawn Standard
A442 Specification for Pressure Vessel Plates, Carbon Steel, Improved Transition
Properties
7.12 Fracture Toughness Criteria of Base Material for Ferritic Steel Shipping Cask
Containment Vessels with a Wall Thickness Greater than 4 Inches (0.1 m) But Not
Exceeding 12 Inches (0.3 m)
Committee E28 on Mechanical Testing
E208 Standard Test Method for Conducting Drop-Weight Test to Determine NilDuctility Transition Temperature of Ferritic Steels