CURRICULAM VIATE
N. SYED MUSTHAFA
129 , B Block, Jakir Hussian ST,
musthafandt@gmail.com
Tennur, Trichy, Tamil nadu , India.
India -91-7845596660
Sykpe Id : musthafa60600
Carrier summary:
Total of 5 years experience in Inspection, Quality Control and Non Destructive Testing
of Pressure Vessels, Heat Exchangers, Piping and Structures for Petrochemical Plants, Power
Plants, Rigs, Ships and Storage Tanks both at the time of fabrication and on-stream stage.
Current Experience
Employer
: YANSAP PETROL & CHEMICAL PLANT ( SHUT DOWN )
JEDDHA ( YANBU ) IN SAUDI ARABIA.
Position held : NDT Technician. ( UT , MT , PT , Broescope Inspection, Eddy current )
Period
: JAN 2015 to JUN 2015 ( Five month )
JOB EXPERIENCE
Performed NDT Inspection of vessels, Tanks, Pipes, Coils, Structural Steel etc
Performed UT Thickness measurement for Exchanger, Hot piping area, Vessels,
Tank, Reactor and columns.
Performed Ultrasonic Testing UT corrosion Survey on all Fuel, Drain & Gas
pipelines
Performed UT Weld Scanning for Exchangers, Vessels, Long seam & cir seam
weld.
Performed Magnetic Particle Testing & Reentrant Testing on required
Equipments & Pipelines
Performed Ultrasonic Thickness measurement for Reactor in shell , head ,
Nozzle and piping recorded in thickness report
Performed bores cop inspection in Exchangers inside all the piping in video
recorded in borescop machine the I have found the chemical deposited
Performed ultrasonic testing with Vessels , Columns , Reactors , Exchangers and
piping Nozzles everything measurement recorded in report
Preparation of all inspection report submission to Client and maintain Company
Inspection filling system
Employer
: M/s. INSPECTA INTERNATIONAL LLC , Ajman, DUBAI ( UAE ).
Position held : NDT Technician. ( UT , MT , PT )
Period
: April 2012 to May 2014 . ( Two years )
JOB EXPERIENCE
Performed Ultrasonic Testing on piping in detection of Corrosion, Erosions and
Pitting & UT Thickness Survey on vessel & Column.
Performed Ultrasonic Thickness Survey on gas pipelines.GASCO
(Gas Project HABSHAN)Performed UT (Weld Scanning, Thickness Survey and Corrosion Survey) MT and
DPI on the required joints of pipelines at Ammonia Plant, Sulphuric Plant.
Performed Ultrasonic Testing, Ultrasonic Thickness Survey, MT & PT on welds of
Boats & small Ships during Maintenance & Constructions.
Performed UT & PT on Welds for tubes, pipes, header joints and valves bodies
Performed UT on welds & raw materials (lamination check) for windmill tubular
towersArranging the NDT inspection for selected joints as per customers
requirements
Ultrasonic testing on various piping butt welded joint in (sulphur gas plant loading
facility extension Project in jetty area) during the time of construction,
Magnetic Particle testing on various pressure Piping & Pipeline for UAE GAS
sulphur plant project inside the Raslaffan facility area.DPI for CUNI Fire water
line.
Performed UT Thickness measurement for Exchanger, Hot piping area, Vessels,
Tank, Reactor and columns.
Performed ultrasonic thickness measurement for column Nozzle and inside plate
welding and manual thickness recorded in UT Report
Performed ultrasonic thickness in vessels welding piping and all outside nozzle and
manual head and shell head recorded in UT Report
Performed ultrasonic testing in weld plate and pipe line weld found the defect of
the weld prepared final UT report
Preparation of all inspection report submission to Client and maintain Company
Inspection filling system
Employer
: CETHAR VESSELS LIMITED PVT IN INDIA
Position held : NDT Technician.
Period
: May 2010 to March 2012 ( UT , MT , PT )
JOB EXPERIENCE
Performed UT Thickness Survey, Prepared thickness survey reports.
Performed DPI on the Heater and required joints of pipelines.
Performed DPI on the required joints of pipelines on Root weld and Final weld.
Performed UT Thickness Survey, Prepared thickness survey reports
Performed MT on Reactors (Ac yoke method).
Performed DPI on the Pipelines joints, Reactors, Exchangers, Vessels, Heaters and
Columns.
Carried out the DPT in the pipe lines, exchangers, vessels and heaters.
Preparation of final inspection report
Performed Magnetic Particle Testing on Heavy Pressure Vessels with connecting
tubes and boiler super heater coils
Performed Ultrasonic Testing on piping in detection of Corrosion, Erosions and
Pitting on welded parts, Refinery drums and oil storage tanks.
Performed MT on weldments and UT on raw materials lamination check and
weldments.
Ultrasonic Testing on piping in detection of Corrosion, Erosions and Pitting on
welded parts, Refinery drums and oil storage tanks.
Magnetic Particle Testing on Heavy Pressure Vessels with connecting tubes and
boiler super heater coils, etc.
Performed Ultrasonic Testing, Ultrasonic Thickness Survey, MT & PT on welds of
Boats & small Ships during Maintenance & Constructions.
Employer
: PRAVEEN ENGINEERING WORKS, Trichy ( India ).
Position held : ASST, NDT Technician. ( UT , MT , PT )
Period
: Jan 2009 to Mar 2010
JOB EXPERIENCE
Assigned to NDT Technician to carry out on Weld Inspection on piping.
Carried out NDT testing for client using UT, MT & PT methods.
Carried out Ultrasonic Corrosion monitoring of Pipelines
Carrie Carried out PT inspection on welds joints, & MT on weld,
Nozzle fillet weld and inspected on machined.
Performed UT Weld Scanning for Exchangers, Vessels, Long seam &
cir seam weld.
Project carried on Major Company:
AEW (Ambigai Engineering Works)
Performed UT on casting materials on Hub after Machining.
AE (Anand Engineering) –
Performed UT on weldments raw materials (lamination check) for windmill tubular
towers.
DN (Dhanalakshmi Engineering) –
Performed UT on weldments, Power Generating Jobs.
NEE (Nagi Enterprise) –
performed UT on weldments for Nozzles and castings hub materials check.
BEI (Barakath Engg Industries)
Performed UT on raw material (Lamination check) for all wind mill tubular towers.
BEPL (Baby Engg Pvt. Ltd.)
Performed UT & MT on weld of heat Exchanger, boiler drums (require joints) and raw
materials.
Technical Qualification:
American Society for Non-Destructive Testing ASNT LEVEL-II
ASNT-SNT-TC-1A Certified Level II in Ultrasonic Testing.
ASNT-SNT-TC-1A Certified Level II in Radiographic Testing.
ASNT-SNT-TC-1A Certified Level II in Penetrant Testing.
ASNT-SNT-TC-1A Certified Level II in Magnetic Testing.
Educational Qualification:
B.COM
- Jamal Mohamed College
HSCC
- G.S.M. HR, SEC, SCHOOL
S.S.L.C
- G.S.M. HR, SEC, SCHOOL
Familiarization with equipment handled:
Ultrasonic Testing
:
EEC EX10, MICROSCAN PX10, PX20,
MODSONIC EINSTIEN II TFT , USM 35 , 25.
MODSONIC EDISON ENSTIEN – II TFT
OLYMPUS – EPOCH 600 – USA
ANLOG MACHINE & DIGTAL MACHINE
Thickness Survey
:
MODSONIC EDISON-1.
OLYMPUS – MG45
CHINA MACHINE – UM2D
Broescope Inspection
:
EVERST - VIT - USA
Radiographic Testing
:
SENTINAL, SPEC, ROLI-1.
Magnetic Particle Testing
:
MAGNA FLUX (YOKEMETHOD) AC & DC.
Liquid Penetrant Testing
:
VISIBLE SOLVENT REMOVABLE METHOD
Computer Knowledge:
PGDCA
- CCI Computer Education,Trichy,Tamil Nadu
TALLY ERP 9 - BDBS Computer Education,Trichy,Tamil Nadu
Personal Profile:
Father’ s Name
:
S. Nagoor Gani
Gender
:
Male
Date of birth
:
02.04.1987
Marital Status
:
Single
Nationality
:
Indian
Languages Known
:
English, Tamil & Hindi.
India Licence
: F / TN / 045 / 014286 / 2005
LMV
: 07 / 06 / 2005 / TN045
MCWG
: 07 / 06 / 2005 / TN045
PASSPORT DETAILS:
Passport Number
:
H 6413091 (ECNR)
Validity
:
up to 07/09/2019
Place of Issued
:
Trichy, Tamilnadu, India
DECLARATION:
I hereby declare that the above given details are true and correct to the
best of my knowledge.
Place:
Yours Faithfully,
Date:
N. SYED MUSTHAFA