click to save-FUEL ENERGIZER

advertisement
FUEL
ENERGIZER
CONTENTS









INTRODUCTION
HYDROGEN AND ITS STATES
NEED FOR FUEL ENERGIZER
INSTALLATION
WORKING
ADVANTAGES
COMPARISION WITH CATALYTIC
CONVERTER
CONCLUSION
REFERENCE
INTRODUCTION

Hydrocarbon fuels leave a natural deposit of carbon
residue during combustion.

They do not combust until they are vapourised and
mixed with air.

This leads to pinging , reduced efficiency , decrease
in mileage and also emit unburned hydrocarbons and
carbon monoxide.
Due to the emission of these gases , pollution occurs
and has an adverse effect on mankind.

HYDROGEN AND ITS STATES



Methane(CH4) is the major constituent of natural
gas i.e., above 90% and is an important source
of hydrogen.
Most of the energy released from methane is
due to hydrogen.
Ex: combustion of octane (C8H18)
carbon content
hydrogen content
84.2%
15.8%
energy-12.224 BTU
9.810BTU
Thus hydrogen plays an important role in
the combustion process.
 Hydrogen has DIPOLE MOMENT as it has
a positive and a negative charge.
 Though it is a simple element, it occurs in
two isomeric forms-PARA & ORTHO.
 Ortho hydrogen is more reactive than para
hydrogen.
 So, para hydrogen form of hydrogen is
used as a fuel in rockets.

WHY DOES INCOMPLETE
COMBUSTION OCCUR ?
Hydro carbons basically have a CAGE like
structure and hence availability of oxygen
is less.
 Hydrogen exists in its less reactive para
state.
 Oxygen has 2 valence electrons and
hydrocarbons have neutral molecular
structure and hence they get repel each
other resulting in incomplete combustion.

METHODS TO OVERCOME

If hydro carbon molecule could better bind
with oxygen molecule then combustion
goes on easily.

Changing the state of hydrogen molecule
from para state to more reactive ortho
state.
FUEL ENERGIZER
ROLE OF FUEL ENERGIZER
It is basically a frequency resonator that
uses NEODYMIUM super conductor
magnets.
 It is also called MAGNETIZER as its
working mostly relates to magnetic field.
 It is capable of producing strong magnetic
field with the help of magnets.
 By applying a strong magnetic field
hydrocarbons can be broken so that
surface area increases.
 This field also helps in changing the state
of hydrogen.

WORKING
Fuel is composed of set of molecules,
which are made of atoms and which in
turn have electrons revolving around
nucleus
 Taking the working of this energizer , it
realigns the molecules of hydro carbon
chain.

INSTALLATION

It is installed on cars ,trucks immediately
before carburetor or injector on fuel line.

On home cooking gas system it is
installed just before burner.
ADVANTAGES
More mileage (up to 28% increase) per
liter due to 100% burning fuel.
 No fuel wastage.
 Good pick up.
 Reduced engine noise.
 Reduced smoke.
 Smooth running engine.
 Increased acceleration .

COMPARISION
CATALYTIC CONVERTER
1.
2.
Most catalytic
converters require air
pumps to initiate
catalysis
Catalytic converters
require a light-off
temperature to be
attained before they
become operative
(between 3 to 5
miles).
MAGNETIZER
1.
They don’t require air
pumps.
2.
Any temperature need
not be attained.
3.
These are subjected to
melt down under rich
gas mixture.
3.
These are fully
permanent devices.
4.
Cant be transferred from
vehicle to other one.
4.
Can easily be transferred
from vehicle to vehicle.
5.
Not replaced due to
high cost.
5.
Can be replaced as cost
is low.
6.
It pollutes the
environment.
6.
Friendly to the
environment.
GREEN TECHNOLOGY
CONCLUSION
By properly utilizing
The technology - The magnetizer

SAVE
yourself
your place
-
your vehicle
OUR environment
THANK YOU
Queries????
Download