PPT For Lab Testing Equipments

advertisement
YOU ARE WELCOME
TO
RAJIV MACHINES (P) LTD. INDIA
MANUFACTURER EXPORTERS OF ALL TYPES OF PAPER MILL INSTRUMENTS
•
•
MOTORISED BASIS WEIGHT VALVE
CONSISTENCY TRANSMITTER & CONTROL
•
MOTORISED STEAM CONTROL VALVES
•
CONTROL VALVE ACCURATOR
•
•
AUTO GUIDES
LAB INSTRUMENTS
•
PAPER PLANTS
WE ARE ALSO EXCLUSIVE REPRESNTATIVE IN INDIA FOR
PRESSURE SCREEN BASKET
MANUFACTURED BY WORLD LEADER
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY OTHER PAPER MILL INSTRUMENT,
FEEL FREE TO CONTACT US AT:
M/S. RAJIV MACHINES(P) LTD.
Street no. 6, Main Gate, Punjab Expeller Compound, Meerut Road,
Ghaziabad-201001, U. P. (India)
Tel.: +91-120 - 2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 & 4155652
Email: [email protected], [email protected] Website: www.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The technical data in this catalogue are therefore subject to change.
QUADRANT SCALES (RMPL-1001)
Rigid tubular pendulum with hardened bearing for
needle. Sturdy pendulum design combined
with low center of gravity gives these scales
outstanding stability and reliability.
Basket of Steel Wire
Cast tripod base with chromium plated
levelling screw.
Stainless Steel tearing templates (
Quadrant Scale in double graduations shows
direct weight in GSM.
OPTIONS:
Range Available:
Single Graduated Scales:
A) 0-250 GSM SIZE: 20x25CMS & 40x25CMS
B) 0-500 GSM SIZE: 20x25CMS & 40x25CMS
C) 0-1000 GSM SIZE: 20x25CMS & 40x25CMS
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY OTHER PAPER MILL INSTRUMENT,
FEEL FREE TO CONTACT US AT:
M/S. RAJIV MACHINES(P) LTD.
Street no. 6, Main Gate, Punjab Expeller Compound, Meerut Road,
Ghaziabad-201001, U. P. (India)
Tel.: +91-120 - 2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 & 4155652
Email: [email protected], [email protected] Website: www.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The technical data in this catalogue are therefore subject to change.
DIGITAL GRAMMAGE TESTER (RMPL- 1001 B)
DIGITAL GRAMMAGE TESTER
Digital Grammage Tester is intended for measuring the GSM very rapidly
and accurately. One can measure GSM up to 15000 GSM. By using this
scale. 10cm x 10cm., Test Sample of paper, board or other sheet
materials is kept on the Balance for accurate measurement of GSM.
Accordingly Digital Reading in GSM is seen on the screen provided for
the same.
STANDARD FEATURES
Fast Weighing Response
Micro Processor Controller
v A C indication
v Check Weighting
v Re-chargeable battery back-up
Auto Power Off System
v Auto Zero Tracking
v High Brightness LED
v Stability Indication
SPECIFICATIONS :MODEL
RMPL-1001B
CAPACITY
15000GSM
READABILITY
1GSM
PAN SIZE
110MM DIA
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY OTHER PAPER MILL INSTRUMENT,
FEEL FREE TO CONTACT US AT:
M/S. RAJIV MACHINES(P) LTD.
Street no. 6, Main Gate, Punjab Expeller Compound, Meerut Road,
Ghaziabad-201001, U. P. (India)
Tel.: +91-120 - 2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 & 4155652
Email: [email protected], [email protected] Website: www.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The technical data in this catalogue are therefore subject to change.
PRECISION THICKNESS MICROMETER (RMPL-1003)
Measuring spindle with constant lowering speed (1
mm/sec,2mm/sec ) and Single Button Operation (Motorized).
Hardened and lapped measuring face
Provided with Optical Transducer which scan a line screen.
Compact Models with digital display
Test area: 2 cm2
(This means that the pressure applied by the weight shall be
about 2 Kg.)
Steady Pressure: 1 Kg/cm2 (98.0 Kpa)
Throat Depth: 75 mm.
Measuring Range: 0-20 mm
Resolution: 1mm
Dead weight load: Fixed.
Lowering Speed: Fixed, Controlled
Power Supply/Consumption: Single Phase 230/240 V - 25 W
Power Supply/Consumption: Single Phase 230/240 V - 25 W
Versions Available and compliance Standards:
Dead Weight Surface Lowering Example
Load Kg. Size cm2 Speed mm/s of Standards
2 2 1 SCAN - P7
2 2 2 ISO 534, DIN 53105
1 2 0.8 TAPPI T 41, T 426 M-46
2 10 2 FEFCO No 3, SCAN P31 0.2 10 1 SCAN P47
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY OTHER PAPER MILL INSTRUMENT,
FEEL FREE TO CONTACT US AT:
M/S. RAJIV MACHINES(P) LTD.
Street no. 6, Main Gate, Punjab Expeller Compound, Meerut Road,
Ghaziabad-201001, U. P. (India)
Tel.: +91-120 - 2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 & 4155652
Email: [email protected], [email protected] Website: www.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The technical data in this catalogue are therefore subject to change.
FOLDING ENDURANCE TESTER (RMPL-1006)
Two specimen can be tested simultaneously.
The number of folds is registered by two
counters which are stopped automatically,
when the specimen breaks.
Folding clamps quick grip type of stainless
steel for a strip width of 15 mm.
Absolutely vibration free run of folding clamp,
due to the absence, of a conventional geared
drive.
Loading clamps of with weight bars and
weights steps of 50 g give loads between 1.96
and 9.32 N. Standard load according to SCAN
and ISO is 7.85 N (corresponding to a weight
of 800 g)
Five figure counters with zero setting.
Folding angle: 3120.
Folding speed: 200 double folds/min.
Dimensions of Test Strip: 15 X 100 mm.
Motor rating (with pulley): 400 V 3 Phase 220
V 1-Phase. 50 Hz.
Applicable standard: Relevant SCAN std.
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY OTHER PAPER MILL INSTRUMENT,
FEEL FREE TO CONTACT US AT:
M/S. RAJIV MACHINES(P) LTD.
Street no. 6, Main Gate, Punjab Expeller Compound, Meerut Road,
Ghaziabad-201001, U. P. (India)
Tel.: +91-120 - 2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 & 4155652
Email: [email protected], [email protected] Website: www.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The technical data in this catalogue are therefore subject to change.
TEARING TESTER (RMPL-1007)
Easy to operate and has high accuracy level ±
1% of readout value and reliability.
Adjustable base levelling screw.
Incision knife of hardened and ground spring
steel.
Precision clamps with controlled jaws, made of
stainless steel.
Extra light low friction. Pointer with friction
lining of textile material.
The complete pendulum is exchangeable.
Scale calibrated in mN
SPECIMEN:
Height 62 mm ± 0.2 mm.
Length: 50 ± 2.0 mm
Interchangeable Pendulums having the following
capacities:
Calibration Check Weights
Tearing Sample cutter
For preparation of tearing test specimen
Window base software program for data colleciton to a
PC.
RS 232 C interface Cable for Data acquisitions software.
APPLICABLE STANDARDS:
TAPPI T-414 , APPITA P-400, SCAN P-11, ASTM D
689, D 751, D 1424
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY OTHER PAPER MILL INSTRUMENT,
FEEL FREE TO CONTACT US AT:
M/S. RAJIV MACHINES(P) LTD.
Street no. 6, Main Gate, Punjab Expeller Compound, Meerut Road,
Ghaziabad-201001, U. P. (India)
Tel.: +91-120 - 2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 & 4155652
Email: [email protected], [email protected] Website: www.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The technical data in this catalogue are therefore subject to change.
PRECISION TEST STRIP PUNCH & DIE CUTTER (RMPL 1008)
Available for the following 15 X 300 mm
test piece sizes: 25 X 300 mm
50 X 300 mm
1/2 X 6 inches
Accuracy
Test piece width 15 mm,
25 mm and 1/2 inches: ± 0.05 mm
Test piece width 50 mm ± 0.1 mm
Test piece length ± 0.1 mm
Changes:
RMPL products undergo continuous
development. The technical data in this
catalogue are therefore subject to change
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY OTHER PAPER MILL INSTRUMENT,
FEEL FREE TO CONTACT US AT:
M/S. RAJIV MACHINES(P) LTD.
Street no. 6, Main Gate, Punjab Expeller Compound, Meerut Road,
Ghaziabad-201001, U. P. (India)
Tel.: +91-120 - 2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 & 4155652
Email: [email protected], [email protected] Website: www.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The technical data in this catalogue are therefore subject to change.
BURSTING STRENGTH TESTER - FOR PAPER RMPL(1009 A)
SPECIFICATIONS
Heavy Duty Cast Iron body.
Compression foot of plexigalss with clamping plate of acid proof steel.
More uniform and better control piston speed.
Adjustable Clamping Force
Motor suspension in rubber cradle.
Lever actuates the raising and lowering of the upper clamp.
The Bursting Pressure, at the time of rupture is recorded on a sensitive
pressure gauge.
Specimen Clamp-Upper Part: 30.48 mm
Specimen Clamp-Lower Part: 33.07
Flor Rate: 95 10cc/min
Motor: 150W, 220V AC Single Phase/ a as per
your order
All pressure gauges are statically and dynamically calibrated.
One pressure gauge is fitted as standard having peak value indicator. Two
way valve is provided for extra pressure gauge.
Units supplied with ‘C’ spanner, 3 spare diaphragms and glycol topping-up
fluid.
Various Standard Pressure Gauges Supplied on Demand:
0 - 2, 0 - 4, 0 - 7, 0 - 10, 0 - 14 Kg/cm2
Complies with following International Test Standards:
TAPPI T 807 om-83, T 810 om-85, T 403 om-85,
APPITA P-438, SCAN P-24:77, P-25-68,
BS 3137, ISO 2758, CPPA D8
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY OTHER PAPER MILL INSTRUMENT,
FEEL FREE TO CONTACT US AT:
M/S. RAJIV MACHINES(P) LTD.
Street no. 6, Main Gate, Punjab Expeller Compound, Meerut Road,
Ghaziabad-201001, U. P. (India)
Tel.: +91-120 - 2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 & 4155652
Email: [email protected], [email protected] Website: www.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The technical data in this catalogue are therefore subject to change.
BURSTING STRENGTH TESTER - FOR BOARD RMPL(1009 B)
SPECIFICATIONS
Heavy Duty Cast Iron body.
Compression foot of plexigalss with clamping plate of acid proof steel.
Uniform control piston speed.
Adjustable Clamping Force
Motor suspension in rubber cradle.
Wheel Handle actuates the raising and lowering of the upper clamp.
The Bursting Pressure, at the time of rupture is recorded on a sensitive
pressure gauge.
Specimen Clamp-Upper Part: 30.48 mm
Specimen Clamp-Lower Part: 30.48 mm Pressure Speed: 170 +10ml/min
Motor: 150W, 220V AC Single Phase/38v 3 Phase
All pressure gauges are statically and dynamically calibrated.
The gauges are provided with a quick coupling and a device which
prevents air from entering in the hydraulic system, when fitting the
pressure gauge.
One pressure gauge is fitted as standard having peak value indicator. Two
way valve is provided for extra pressure gauge.
Units supplied with ‘C’ spanner, 2 spare diaphragms and glycol topping-up
fluid.
Various Standard Pressure Gauges Supplied on Demand:
0 - 10, 0 - 14, 0 - 21, 0 - 28, 0 - 40, 0 - 70 Kg/cm2
Complies with following International Test Standards:
TAPPI T 807 om-83, T 810 om-85, T 403 om-85,
APPITA P-438, SCAN P-24:77, P-25-68,
BS 3137, ISO 2758, CPPA D8
OPTIONS
Standard Pressure Gauges with Indicator for Peak Value.
Double Graduation in Kg/cm2 and PSI.
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY OTHER PAPER MILL INSTRUMENT,
FEEL FREE TO CONTACT US AT:
M/S. RAJIV MACHINES(P) LTD.
Street no. 6, Main Gate, Punjab Expeller Compound, Meerut Road,
Ghaziabad-201001, U. P. (India)
Tel.: +91-120 - 2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 & 4155652
Email: [email protected], [email protected] Website: www.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The technical data in this catalogue are therefore subject to change.
BURSTING STRENGTH TESTER (RMPL-1009-C)
Heavy Duty Cast Iron body.
Adjustable Clamping Pressure
Compression foot of plexigalss with clamping plate of acid proof steel.
More uniform and better control piston speed.
Clamping force adjustable by means of pressure reducing valve
Motor suspension in rubber cradle.
A valve with lever actuates the raising and lowering of the upper clamp.
Clamping pressure applied by pneumatic cylinder.
For Paper
Specimen Clamp-Upper Part: 30.48 mm ± 0.05
Specimen Clamp-Lower Part: 33.07 mm ± 0.05
Pressure Speed:For paper 95 ± 10ml/min
For Board Model RMPL 1010 C-II
Specimen Clamp-Upper Part: 31.50 mm ± 0.05
Specimen Clamp-Lower Part: 31.50 mm ± 0.05
Pressure Speed:For paper 170 ± 10ml/min
Motor: 150W, 220V AC Single Phase/
a as per for order
Units supplied with ‘C’ spanner, 3 spare diaphragms and glycol topping-up
fluid.
Complies with following International Test Standards:
TAPPI T 807 om-83 T 810 om-85
APPITA P-438 SCAN P-24-77/ P-25-68
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY OTHER PAPER MILL INSTRUMENT,
FEEL FREE TO CONTACT US AT:
M/S. RAJIV MACHINES(P) LTD.
Street no. 6, Main Gate, Punjab Expeller Compound, Meerut Road,
Ghaziabad-201001, U. P. (India)
Tel.: +91-120 - 2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 & 4155652
Email: [email protected], [email protected] Website: www.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The technical data in this catalogue are therefore subject to change.
DENSOMETER (RMPL-1011)
Weight of inner cylinder 567 ± 1 g, provided with the ring mark for
measuring air leakage through the specimen.
Outer cylinder of Chromium Plated Brass.Inner cylinder of light
metal with top of Chromium Plated Brass.
Support spring for the inner cylinder in the raised position.
Self aligning clamping plate of stainless steel with ground top
surface.
Rubber Gasket for air tight sealing for sample
Orifice Area 1 inch2: (645 mm2)
Complies with the International Standards
SCAN P19 66
TAPPI T 460 SM 49
APPITA P 420
CPPA D 14
OPTIONS:
Electronic self starting timer for automatic measuring of either 25,
50, 100, 150, 200 or 300cm3 air to pass through the test specimen.
The timer starts automatically when the zero slit of the graduated
ruler pass an optional read fork and stops automatically as soon as
the predetermined volume of air has been passed through the
sample.
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY OTHER PAPER MILL INSTRUMENT,
FEEL FREE TO CONTACT US AT:
M/S. RAJIV MACHINES(P) LTD.
Street no. 6, Main Gate, Punjab Expeller Compound, Meerut Road,
Ghaziabad-201001, U. P. (India)
Tel.: +91-120 - 2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 & 4155652
Email: [email protected], [email protected] Website: www.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The technical data in this catalogue are therefore subject to change.
SMOOTHNESS & POROSITY TESTER BENDSTEN TYPE
(RMPL-1012)
Self contained air supply.
Three rotameter tubes: 5 - 150, 50 - 500 and 300 - 3000 ml/min.
Contact Pressure roughness 98 kPa(14.2 psi).
Additional hardness measuring weight contact pressure 490 kPa
(71 psi).
Air Pressure: 3 Manostat weights, which give constant pressure of
approx. 0.75, 1.5 & 2.25 kPa.
Ensures an accurately regulated constant air supply.
Accessories Included: Air Permeance measuring Head.
Face ground glass plate.
Separate compressor electrically operated
Extra weight for compressibility
measurements.
Plane Holder - keeps the sample flat.
Power Supply / Consumption: 220 / 240 V Single Phase 50 Hz. / 75
W.
Compliance with International Standards
APPITA/AS 1301.440, DIN 53120, DIN 53108, ISO 5636/3, SCAN
P60
ISO 8791/3, ISO 8791/4, ISO 2494
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY OTHER PAPER MILL INSTRUMENT,
FEEL FREE TO CONTACT US AT:
M/S. RAJIV MACHINES(P) LTD.
Street no. 6, Main Gate, Punjab Expeller Compound, Meerut Road,
Ghaziabad-201001, U. P. (India)
Tel.: +91-120 - 2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 & 4155652
Email: [email protected], [email protected] Website: www.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The technical data in this catalogue are therefore subject to change.
FLUFF TESTER (RMPL-1013)
plates cylinder.
Nip pressure: 13.5 Kg.
Blanket cylinder: 10” wide X 6” dia.
Blanket material: can be easily changed
After selected number of sheets have been
passed through, a linen counter mounted at the
top of the machine is used to count the number
of particles and fibres adhering to a given area
of blanket.
Changes:
RMPL products undergo continuous
development. The technical data in this
catalogue are therefore subject to change
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY OTHER PAPER MILL INSTRUMENT,
FEEL FREE TO CONTACT US AT:
M/S. RAJIV MACHINES(P) LTD.
Street no. 6, Main Gate, Punjab Expeller Compound, Meerut Road,
Ghaziabad-201001, U. P. (India)
Tel.: +91-120 - 2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 & 4155652
Email: [email protected], [email protected] Website: www.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The technical data in this catalogue are therefore subject to change.
STIFFNESS TESTER - Taber Type (RMPL-1014-A)
Test Range: 0-10,000 stiffness unit.
Test Material Thickness 0.004 to 1/8 of an inch (if within load range of
instrument)Pendulum Two Directional
Specimen Size: 38 X 70 mm (15 X 2.75 inch)
for bending distance of 5 cm.
38 X 38 mm (15 X 15 inch)
for bending distance of 1 cm.
Load 5000 unit at 15 degree (standard bending)
10000 unit at 7.5 degree (standard bending)
Roll Diameter 10.5 mm and 11 mm factory calibrated
accuracy of ±1% full scale in each range.
Drive by small gear motor rated for 220V AC, 2 rpm,
50 Hz electrical components sealed in
housing.
The Tester conforms to following TAPPI 489 m-69
international Standards: ASTM D-747-61-T
JIS P-8185
The instrument is provided with accessories, including a shear for cutting
material test specimens, additional weight for extending the test range and
10 unit compensator weight for 0-10 stiffness unit.
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY OTHER PAPER MILL INSTRUMENT,
FEEL FREE TO CONTACT US AT:
M/S. RAJIV MACHINES(P) LTD.
Street no. 6, Main Gate, Punjab Expeller Compound, Meerut Road,
Ghaziabad-201001, U. P. (India)
Tel.: +91-120 - 2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 & 4155652
Email: [email protected], [email protected] Website: www.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The technical data in this catalogue are therefore subject to change.
ELECTRONIC STIFFNESS TESTER
(RMPL-1014-B)
Measuring results: Bending Resitance in mN at specified angles
Bending Stiffness in mNm under specified conditions.
Bending angle: Infinitely variable 50 & 300 and six fixed positions
50, 7.50 , 150 , 200 , 250 and 300
Bending length: 5, 10, 15, 20 15 & 50 mm.
Bending Speed: 50 /s.
Strip Dimensions: Width 38 mm (1.5”)
Thickness max 3 mm.
Measuring range: 0-5000 mN.
Accuracy: £ ± 2% of reading but not better than
± 1% of load range.
Analog Output 0-10 V.
Power Consumption: 50 W.
Power Supply: Single Phase, 220 V, 50 Hz
OPTION
Load Cell range 0-10000 mN
ACCSSORIES
Triple Shear Cutter to prepare the test sample.
Standard calibarted dead weigths.
APPLICABLE STANDARDS
ISO 2493, DIN 53121, BS 3748, NF Q 03-048, SCAN P29
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY OTHER PAPER MILL INSTRUMENT,
FEEL FREE TO CONTACT US AT:
M/S. RAJIV MACHINES(P) LTD.
Street no. 6, Main Gate, Punjab Expeller Compound, Meerut Road,
Ghaziabad-201001, U. P. (India)
Tel.: +91-120 - 2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 & 4155652
Email: [email protected], [email protected] Website: www.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The technical data in this catalogue are therefore subject to change.
REFLECTANCE METER - Photovolt Type (RMPL-1015)
Display System: Digital Direct read out.
Measurement: Brightness, Opacity and Gloss.
Measurement Area: 10mm Dia.
Light Source: 6V, 1 A. Tungsten Lamp.
Filters (kinds): Blue, Green, and Amber.
Sensor: Selenium Photocell.
Brightness Search Unit: Consist of deep blue gelatine filter #49, between
photo voltaic
cell, Infrared absorbing glass and source of light.
Opacity Search Unit: Consist of green filter.
Gloss Search Unit: Consist Glass filter and measures gloss as specular
reflectively
at 750 angle of incidence.
Power Supply: 230 ± 5% volts, 50 cycles AC. Provided with a built in
highly
stabilized power supply to stabilize light intensity of the lamp.
ACCESSORIES: I. White Enamel Standard.
ii. High Reflectance White Enamel Standard.
iii. Polished Black Glass.
iv. Cavity represents a sample of zero reflectance.
The unit has been designed in accordance with TAPPI, ASTM and ISI
(1060 Part II) 1960 standards.
OPTIONS:
Device for measuring, brightness of powdered materials, conforming to
TAPPI useful method - 605 (formerly RC 127)
Changes:
RMPL products undergo continuous development. The technical data in
this catalogue are therefore subject to change
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY OTHER PAPER MILL INSTRUMENT,
FEEL FREE TO CONTACT US AT:
M/S. RAJIV MACHINES(P) LTD.
Street no. 6, Main Gate, Punjab Expeller Compound, Meerut Road,
Ghaziabad-201001, U. P. (India)
Tel.: +91-120 - 2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 & 4155652
Email: [email protected], [email protected] Website: www.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The technical data in this catalogue are therefore subject to change.
COBB TESTER (RMPL-1017)
A device to determination of the weight increase of a sample
contact with water for a given time. The mass of water absorb in a
specific time by a one square meter of paper, board, corrugated
fiber board under specified conditions is called water
absorptiveness or cobb value. It also indicates the additive
substances applied during process that improves printing quality
and resistance to liquids.
Test area: 100 cm2
Level indication: Indication for 100 ml on the
inside of the cylinder
Couch roll: Stainless Steel roller having a
smooth surface Width 210 mm (8”)
Diameter 88 mm (3.6”)
Weight 10 Kg. +- 0.5 Kg.
Option:
Stop watch
Graduated cylinder 100 ml
Balance .001 gram
Advantage
To check the water absorbency of paper and board.
Amount of water absorbed in 45-sec./60 sec./120 sec (as case may
be) under 1 cm. head by one side of unit area of paper placed
horizontally
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY OTHER PAPER MILL INSTRUMENT,
FEEL FREE TO CONTACT US AT:
M/S. RAJIV MACHINES(P) LTD.
Street no. 6, Main Gate, Punjab Expeller Compound, Meerut Road,
Ghaziabad-201001, U. P. (India)
Tel.: +91-120 - 2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 & 4155652
Email: [email protected], [email protected] Website: www.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The technical data in this catalogue are therefore subject to change.
OIL PENETRATION TESTER
Williams Type (RMPL-1019)
The instrument chamber has an orifice for holding the liquid
medium and a clamping device for holding the material.
Electronic Thermostat provided to keep the liquid at the desired
temperature 35 ± 1 degree C.
Penetration time after oil comes in contact with paper is noted by
stop watch or electronic timer.
Double processed castor oil having viscosity of 700 ± 30 centipoise
at 250 C or mineral oils of the same viscosity and comparable
wetting characteristics are used.
Suitable range thermometer also provided.Changes:
RMPL products undergo continuous development. The technical
data in this catalogue are therefore subject to change
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY OTHER PAPER MILL INSTRUMENT,
FEEL FREE TO CONTACT US AT:
M/S. RAJIV MACHINES(P) LTD.
Street no. 6, Main Gate, Punjab Expeller Compound, Meerut Road,
Ghaziabad-201001, U. P. (India)
Tel.: +91-120 - 2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 & 4155652
Email: [email protected], [email protected] Website: www.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The technical data in this catalogue are therefore subject to change.
PAPER SURFACE OIL ABSORBENCY TESTER
Pira Type (RMPL-1020)
Inclined plane 500 X 100 mm with a 4.5-degree gradient.
Inclined plane covered with rubber-offset blanket
Roller 2.1 Kg, 76 mm diameter and 55 mm wide lined with
Neoprene.
50 CC Paraffin oil with density of 0.88 and viscosity of 1.28 poise at
250C.
Oil-burette delivers 0.02G oil droplets.
10 scale division = 0.0015 ml.
Steel holder for oil burette.
Using an average of 10 tests, the SORT (Surface Oil Resistance
Time) can be determined.
The SORT is the time taken for the 75% of the surface covered by
oil to have absorbed the oil.
The test is very sensitive to temperature. Results should only be
compared at identical room temperatures.
OPTION
Photoelectric Timer
Changes:
RMPL products undergo continuous development. The technical
data in this catalogue are therefore subject to change
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY OTHER PAPER MILL INSTRUMENT,
FEEL FREE TO CONTACT US AT:
M/S. RAJIV MACHINES(P) LTD.
Street no. 6, Main Gate, Punjab Expeller Compound, Meerut Road,
Ghaziabad-201001, U. P. (India)
Tel.: +91-120 - 2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 & 4155652
Email: [email protected], [email protected] Website: www.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The technical data in this catalogue are therefore subject to change.
ELECTRONIC LAB CRUSH TESTER (RMPL-1021)
Memory for retaining peak value
Adjustable thresholds to obtain the optimum peak value of Flat Crush Test
Simple and accurate readout on a digital display.
Electronic Force measurement by Load cell
Measuring Results: Breaking Force in Newton.
Stroke Length: 76 mm.
Deformation Speed: Calibrated 12.0 mm/min or variable speed
selectable up to 50 mm/min. (Metric version)
Return Speed: 50 mm/min approx.
Plate Size: 125 X 125 mm.
Measuring Range: 0 - 5000 N and 0 - 1999 N (Metric Version)
Accuracy: ± 1% of measured value but not better than
0.5% of the nominal value
Rupture Sensitivity: 2 - 20 % of the relevant maximum load.
Power Consumption: 200 W
Power Supply: Single Phase, 220 V, 50 c/s
Options
Precision Circular Punch & Die cutter For preparation of test pieces towards Ring Crush Test.
width 12.5 mm.
Circular Cutter: For cutting out circular sample of board and similar material towards use in Flat
Crush Test.
Circular Neck Down Cutter - For preparing test pieces for measurement of Edge Crush Test
Accessories
For RCT, CCT and ECT
Applicable Standards
APPITA/AS 1301.449, FEFCO No. 50
CMT: CPPA D.24, DIN 53143, ISO 7263, SCAN P27, TAPPI T809.
RCT: CPPA D.33, DIN 53134, SCAN P34, TAPPI T818 and T822
ECT: DIN 53149, FEFCO No. 8, ISO 3037, NF Q 03-041, SCAN P33, TAPPI T811 and T823
FCT: CPPA D.20, FEFCO No. 6, ISO 3035, NF Q 03-033, SCAN P32, TAPPI 808.
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY OTHER PAPER MILL INSTRUMENT,
FEEL FREE TO CONTACT US AT:
M/S. RAJIV MACHINES(P) LTD.
Street no. 6, Main Gate, Punjab Expeller Compound, Meerut Road,
Ghaziabad-201001, U. P. (India)
Tel.: +91-120 - 2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 & 4155652
Email: [email protected], [email protected] Website: www.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The technical data in this catalogue are therefore subject to change.
INTERNAL PLY BOND TESTER
(RMPL-1022)
Made of Heavy cast iron base with built-in leveling device
pressure sensitive tape dispenser integral with base.
A Stationary Anvil and separable platen, which the pendulum
strikes at the same point for each test.
A pendulum of dual capacity 0-0.25 FT/LB and 0.1-0.5 FT/LB.
Foot pound and free to swing on a fall bearing. The range
changing weights must be placed so as not to alter counter of
gravity of pendulum.
A means of holding the pendulum in raised position with a
provision instantaneous release.
A means of registering the maximum arc, enough, which the
pendulum swings when, release.
A scale calibrated in thousands of a foot pound in both ranges,
with a reference point for calibrating the pointer in free swing to
compensate for friction windage.
A multiple specimen preparation station, which will allow for
variations of specimen thick nesses, with optional clamping
pressures on the specimen from 50 to 200 PSI in 50PSI
increments.
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY OTHER PAPER MILL INSTRUMENT,
FEEL FREE TO CONTACT US AT:
M/S. RAJIV MACHINES(P) LTD.
Street no. 6, Main Gate, Punjab Expeller Compound, Meerut Road,
Ghaziabad-201001, U. P. (India)
Tel.: +91-120 - 2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 & 4155652
Email: [email protected], [email protected] Website: www.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The technical data in this catalogue are therefore subject to change.
BEATING & FREENESS TESTERS (RMPL 2002)
BEATING & FREENESS TESTER
Schopper Reigler Model (RMPL-2002)
SPECIFICATIONS
pulp Sample consistency: 0.20%
Pulp Volume: 1000 ml.
Repeatability 1 0SR
Graduation on the discharge collecting cylinder: 0SR
Plexiglas measuring cylinder with double graduation on ccm and 0SR
Cal liberated Nozzle and screen plate container grip enabling easy removal for
cleaning.
Standard wire mesh fixing and removing attachment
Semi Automatic Sealing cone lifting arrangements.
Complies with SCAN standard M-3.65
RMPL products undergo continuous development. The technical data in this
catalogue are therefore subject to change
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY OTHER PAPER MILL INSTRUMENT,
FEEL FREE TO CONTACT US AT:
M/S. RAJIV MACHINES(P) LTD.
Street no. 6, Main Gate, Punjab Expeller Compound, Meerut Road,
Ghaziabad-201001, U. P. (India)
Tel.: +91-120 - 2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 & 4155652
Email: [email protected], [email protected] Website: www.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The technical data in this catalogue are therefore subject to change.
BEATING & FREENESS TESTERS (RMPL 2003)
BEATING & FREENESS TESTER - CANADIAN TYPE
(RMPL-2003)
SPECIFICATIONS
Canadian Freeness Tester has its container sealing lids sprung loaded and swivel through
900. The lids are opened by means of light pressure on the release handles. The container
grip enable easy removal for cleaning.
Its Nozzle and screen plate are calibrated according to relevant standards.
Two measuring cylinders are included.
Standard equipment has a bench top stand. Alternatively wall mounted model can be
supplied on request.
Capacity of the cylinder: 1000 ml above the screen plate.
The Volume in the Bottom 23.5 ± 0.2ml (adjusted by means of section of the cone the
threaded plug in the side orifice) Any change in this volume may affect the calibration.
Slope of the main cone: 290 ± 5 min.
Orifices provided in funnel Two, one at the bottom & other on the side.
Distance between the overflow 50.8 mm ± 0.75 mm
lip of the tube (inside the funnel) Note: This is extremely critical and
and bottom of the funnel section set precisely at the works.
Size of the perforations in the 0.50 mm diameter.
screen plate
Compliance to the following ISO 5267/2
International Standards CPPA C1
BS 6035/2
TAPPI T 227 M-58
OPTIONS
Wall mounted model.
Changes:
RMPL products undergo continuous development. The technical data in this catalogue are
therefore subject to change
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY OTHER PAPER MILL INSTRUMENT,
FEEL FREE TO CONTACT US AT:
M/S. RAJIV MACHINES(P) LTD.
Street no. 6, Main Gate, Punjab Expeller Compound, Meerut Road,
Ghaziabad-201001, U. P. (India)
Tel.: +91-120 - 2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 & 4155652
Email: [email protected], [email protected] Website: www.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The technical data in this catalogue are therefore subject to change.
Semi-Automated Sheet Former (RMPL 2005 B)
Semi-Automated Sheet Former (RMPL-2005-B)
SPECIFICATIONS
Standard Sheet Former with integral pneumatic couching
Suitable for sheet formation of 165 mm diameter
Control cabinet for regulation of filling, air agitation, settling and drainage.
Complete with switch control box accessories to provide 600 KPA air supply to
the sheet former and drainage system connection, water inlet supply
automatically.
Shut off after filling air agitation of stock, settling of the stock immediately
following automatic shut off of agitation, drainage commencing automatically at
the end of settling cycles and signals when complete. On completion of
pneumatic couching, controls reset for next cycle.
It is suitable for operation on 220-250 V 50 Hz AC.
OPTIONS
Square Punch for trimming sheets 200 cm2
Laboratory Blotting Paper
White Water Recirculation System
Changes:
RMPL products undergo continuous development. The technical data in this
catalogue are therefore subject to change
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY OTHER PAPER MILL INSTRUMENT,
FEEL FREE TO CONTACT US AT:
M/S. RAJIV MACHINES(P) LTD.
Street no. 6, Main Gate, Punjab Expeller Compound, Meerut Road,
Ghaziabad-201001, U. P. (India)
Tel.: +91-120 - 2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 & 4155652
Email: [email protected], [email protected] Website: www.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The technical data in this catalogue are therefore subject to change.
SHEET PRESS (RMPL 2007 A)
SHEET PRESS (RMPL-2007-A)
SPECIFICATIONS
Press top made of duralumin to give lightness and rigidity.
Press plattens of stainless steel.
Press top secured by 4 rapid action clamping and release nuts,
facilitating taking in and out the specimen.
Maximum sheet size 165mm diameter.
Working Pressure 3.5 Kg/cm2
Changes:
RMPL products undergo continuous development. The technical
data in this catalogue are therefore subject to change
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY OTHER PAPER MILL INSTRUMENT,
FEEL FREE TO CONTACT US AT:
M/S. RAJIV MACHINES(P) LTD.
Street no. 6, Main Gate, Punjab Expeller Compound, Meerut Road,
Ghaziabad-201001, U. P. (India)
Tel.: +91-120 - 2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 & 4155652
Email: [email protected], [email protected] Website: www.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The technical data in this catalogue are therefore subject to change.
PULP DISINTEGRATOR (RMPL 2008)
PULP DISINETGRATOR (RMPL-2008)
SPECIFICATIONS
Capacity: 2 Litres.
Rotational Frequency: 2975 ± 25 rpm.
Motor: 0.5 KW, 3 Phase, 440V AC
Safety System: Double Safety System permits start
only when drive unit and vessel are in
correct working position.
Applicable Standards: ISO 5263, TAPPI 205/220
SCAN C18/M2, CPPA C6
OPTIONS:
1. Preset Pulse Counter on front panel for setting desired number of revolution.
2. Pulp Container with Heating Elements, Thermostat and 100% safe insulation.
The thermostat control is set at 85 0C to maintain constant temperature of stock
Changes:
RMPL products undergo continuous development. The technical data in this
catalogue are therefore subject to change
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY OTHER PAPER MILL INSTRUMENT,
FEEL FREE TO CONTACT US AT:
M/S. RAJIV MACHINES(P) LTD.
Street no. 6, Main Gate, Punjab Expeller Compound, Meerut Road,
Ghaziabad-201001, U. P. (India)
Tel.: +91-120 - 2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 & 4155652
Email: [email protected], [email protected] Website: www.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The technical data in this catalogue are therefore subject to change.
RAPID SHEET DRYER (RMPL 2009)
RAPID DRYER (RMPL-2009)
SPECIFICATIONS
Rectangular Drying Plates.
Lower plate is lined with wire cloth to lead off the vapour during the
drying process.
Provided with overheating protector.
Switch provided with indicator lamp.
Upper and lower drying plates are heated with flat electrical elements.
Sheet Size: Max. width 250 mm
Max length 300 mm
Temperature range : Adjustable over a wide range, upto maximum of 180
0C ± 10 0C.
Heaters: Flat Electrical Elements single
phase, 220 V, 400 W each for upper and lower plates
Power Supply / Consumption: 220 V, Single Phase, 50 Hz. / 800 W
Applicable Standard: SCAN M- 1
Changes:
RMPL products undergo continuous development. The technical data in
this catalogue are therefore subject to change
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY OTHER PAPER MILL INSTRUMENT,
FEEL FREE TO CONTACT US AT:
M/S. RAJIV MACHINES(P) LTD.
Street no. 6, Main Gate, Punjab Expeller Compound, Meerut Road,
Ghaziabad-201001, U. P. (India)
Tel.: +91-120 - 2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 & 4155652
Email: [email protected], [email protected] Website: www.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The technical data in this catalogue are therefore subject to change.
SHEET DRYING CYLINDER (RMPL 2010)
SHEET DRYING CYLINDER (RMPL-2010)
SPECIFICATIONS
Drum Cylinder Size:
Diameter: 800 mm
Width: 700 mm
Drum Diameter: 500 mm
Drum Width: 600 mm
Fan Motor: 0.1 HP
Heater Capacity: 2 KW, 220 V AC
Rotating Speed: 5 r.p.m.
Working Surface Temperature: 600C
The Drying Cylinder consist of a frame mounted cylinder, guide roll and break
roll. The cylinder is electrically heated and the fan mounted in the cylinder
circulate the heated air inside the cylinder. The required drying temperature is
adjusted by thermostat.
Changes:
RMPL products undergo continuous development. The technical data in this
catalogue are therefore subject to change
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY OTHER PAPER MILL INSTRUMENT,
FEEL FREE TO CONTACT US AT:
M/S. RAJIV MACHINES(P) LTD.
Street no. 6, Main Gate, Punjab Expeller Compound, Meerut Road,
Ghaziabad-201001, U. P. (India)
Tel.: +91-120 - 2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 & 4155652
Email: [email protected], [email protected] Website: www.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The technical data in this catalogue are therefore subject to change.
WOOD CHIP CLASSIFIER (RMPL 2013)
CHIP CLASSIFIER (RMPL-2013)
Sample size: 8 - 10 litres.
Recommended dry content: 40 - 70%.
Screening time: 10 minutes
(Wet chips samples to be dried for 1-2 hrs before screening)
Screening trays: Made of aluminium,
(Shaken in horizontal plane by means of an eccentric gear)
Shaking frequency: 2.7 Hz.
Stroke: 120 mm.
Recommended Standard Screen: (From Top)
No. 1 With 45 mm Dia Hole and triangular pitch 60 mm.
No. 2 With 8 mm wide slots
No. 3 With 7 mm dia holes and triangular pitch 8.5 mm
No. 4 With 3 mm dia holes and triangular pitch 8 mm
No. 5 Dust Pan
Motor 1 HP, 1400 rpm, 415V, 3 Phase, 50 Hz.
Power Consumption 0.2 KW
Rugged Steel stand with guard rail.
OPTIONS
Other hole diameters and slot width.
Other power supplies.
Changes:
RMPL products undergo continuous development. The technical data in this
catalogue are therefore subject to change
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY OTHER PAPER MILL INSTRUMENT,
FEEL FREE TO CONTACT US AT:
M/S. RAJIV MACHINES(P) LTD.
Street no. 6, Main Gate, Punjab Expeller Compound, Meerut Road,
Ghaziabad-201001, U. P. (India)
Tel.: +91-120 - 2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 & 4155652
Email: [email protected], [email protected] Website: www.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The technical data in this catalogue are therefore subject to change.
LABORATORY ROTARY DIGESTER (RMPL 2015)
ROTATING AUTOCLAVE
(RMPL-2015)
SPECIFICATIONS
Capacity: 15 Litres cooking vessel
Maximum Pressure 15 Kg/cm2
Raw Material 3.0 Kg. wood chips approx.
Digester body: Made of Acid Proof Steel.
Autoclave Fabricated from tested boiler plate with inside lining of
stainless steel sheet.
Electric Heating 3 Phase, 400 V, 4 kW.
Rotating Frequency; Rotation with change of turning
direction, ensures efficient agitation of
the pulp.
Motor Rating: 3 Phase, 440 V, 1/2 HP.
Digester provided with Temperature Indicator, Pressure indicator, Safety
Valve and needle valve.
Control Panel an infinitely adjustable power regulator for heating function
and other controls required for operation.
OPTION
Microprocessor Regulator for more detailed pre-programming of boiling
sequence
Bombs
Changes:
RMPL products undergo continuous development. The technical data in
this catalogue are therefore subject to change
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY OTHER PAPER MILL INSTRUMENT,
FEEL FREE TO CONTACT US AT:
M/S. RAJIV MACHINES(P) LTD.
Street no. 6, Main Gate, Punjab Expeller Compound, Meerut Road,
Ghaziabad-201001, U. P. (India)
Tel.: +91-120 - 2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 & 4155652
Email: [email protected], [email protected] Website: www.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The technical data in this catalogue are therefore subject to change.
LABORATORY HYDRA PULPER (RMPL-2017)
LABORATORY HYDRA PULPER (RMPL-2017)
SPECIFICATIONS
Container capacity: 10, 30 & 50 litres.
Consistency: 5% maximum
Speed: 300 RPM.
Propeller V-Belts drive and a circulates the stock effectively to disintegrate
material rapidly.
Stainless Steel 316 vessel duly insulated with Glass Wool
Heating System with adjustable Thermostat Control Heat Capacity 2 KW.
Electric Motor 3 Phase 440V, AC.
Changes:
RMPL products undergo continuous development. The technical data in this
catalogue are therefore subject to change
.
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY OTHER PAPER MILL INSTRUMENT,
FEEL FREE TO CONTACT US AT:
M/S. RAJIV MACHINES(P) LTD.
Street no. 6, Main Gate, Punjab Expeller Compound, Meerut Road,
Ghaziabad-201001, U. P. (India)
Tel.: +91-120 - 2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 & 4155652
Email: [email protected], [email protected] Website: www.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The technical data in this catalogue are therefore subject to change.
FIBER CLASSIFIER – BAUER Mc NETT TYPE (RMPL 2018)
FIBRE CLASSIFIER (RMPL-2018)
SPECIFICATIONS
The primary unit has an inlet funnel with an overflow and the nozzle for a constant water
flow rate.
Fractionating unit is completely self contained having its own electric motor for the rotor
and is made of non-corrosive material.
Fibre collection box with rapid locking device, support wire and suction connection.
Interchangeable screens are available with wire of 4, 6, 8, 10, 14, 20, 30, 50, 100 and
200 standard mesh.
Standard wire mesh size 30, 50, 100, 200 as per TAPPI Standard
OR
Standard wire mesh size 28, 48, 100, 200 as per SCAN Standard
The screen frames are clamped hydraulically by water pressure / pneumatically
clamped by compressed air.
Classifier gives a very low spread in the results with a variation coefficient of less than
1%.
Flow speed 10 litre/min.
Pulp 10g (oven dried)
Required time for screening 20 min.
Motor 0.25 HP AC 3 Phase, 60 W per unit.
Air Pressure: 0 - 6 Kg/cm2
Water Pressure: 2 Kg/cm2
Changes:
RMPL products undergo continuous development. The technical data in this catalogue
are therefore subject to change
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY OTHER PAPER MILL INSTRUMENT,
FEEL FREE TO CONTACT US AT:
M/S. RAJIV MACHINES(P) LTD.
Street no. 6, Main Gate, Punjab Expeller Compound, Meerut Road,
Ghaziabad-201001, U. P. (India)
Tel.: +91-120 - 2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 & 4155652
Email: [email protected], [email protected] Website: www.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The technical data in this catalogue are therefore subject to change.
VIBRATING STRAINER – JOHNSON TYPE (RMPL 2019)
VIBRATING STRAINER
(RMPL-2019)
SPECIFICATIONS
WITH THREE NO. EXTRA SCREENING PLATES WITH
SUITABLE WIDTH & LENGHT
Average capacity equivalent to 5 kg. dried pulp per hour.
Strainer Area 500 X 240 mm.
Standard Strainer plate has 0.15 mm slit width.
Motor Drive 0.5 HP 1440 rpm.
Changes:
RMPL products undergo continuous development. The
technical data in this catalogue are therefore subject to
change
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY OTHER PAPER MILL INSTRUMENT,
FEEL FREE TO CONTACT US AT:
M/S. RAJIV MACHINES(P) LTD.
Street no. 6, Main Gate, Punjab Expeller Compound, Meerut Road,
Ghaziabad-201001, U. P. (India)
Tel.: +91-120 - 2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 & 4155652
Email: [email protected], [email protected] Website: www.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The technical data in this catalogue are therefore subject to change.
LABORATORY CALENDER ( RMPL 4002 )
3 Roller stack with a machined face width of 300 mm.
Adjustable line pressure with a range of 0-100 Kg per linear cm by means
of hydraulic cylinders and electrically driven operated pump complete
with oil tanks etc.
Top and bottom chrome plated polished steel rollers have diameter of 130
mm.
The top roller is electrically heated and thermostatically controlled,
temperature range room temperature to 1000.
Middle roller may be of cellulose and wool fibre or as per your
requirement.
Bottom roller with to specified speed 11.2 or 22.5 M per minute.
Unwindd stand, Unwind shaft and brake supplied as standard.
Power supply 3 Phase 380V, 50 Hz.
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY OTHER PAPER MILL INSTRUMENT,
FEEL FREE TO CONTACT US AT:
M/S. RAJIV MACHINES(P) LTD.
Street no. 6, Main Gate, Punjab Expeller Compound, Meerut Road,
Ghaziabad-201001, U. P. (India)
Tel.: +91-120 - 2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 & 4155652
Email: [email protected], [email protected] Website: www.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The technical data in this catalogue are therefore subject to change.
LABORATORY OVEN ( RMPL – 5001 )
Outer chamber of MS sheet and inner chamber Stainless Steel or aluminium
sheet. Pure glass wool insulated with gap of 65 mm. Door is fitted on heavy cast
and chromium plated brass hinges with insulated handle to push and pull the
door. Outside finish in Hammertone or Synthetic cream or white.
Three switches, Two pilot lamps, Two movable shelves, 150 cm cord. Three pin
plug and L-shape horizontal thermometer.
All heating elements made from best 80/20 composition nickel/chromium
imported KANTHAL wire. Rib heat radiation system works on 220/230 V single
phase AC only.
Temperature from room temperature to 250 0C an accuracy of thermostat ± 1 0C
to 2 0C or less.
Air enters through the holes at the bottom and leaves through the adjustable
exhauster (chimney) at the top or on both the side of the oven by gravity
covection.
Inner chamber size: 14" X 14" X 14" ,
18"X 18" X 18" , and other standard size.
Instrument Size
Depth: 25"
Width: 31"
Length 31"
Weight
Width: 60 Kg.
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY OTHER PAPER MILL INSTRUMENT,
FEEL FREE TO CONTACT US AT:
M/S. RAJIV MACHINES(P) LTD.
Street no. 6, Main Gate, Punjab Expeller Compound, Meerut Road,
Ghaziabad-201001, U. P. (India)
Tel.: +91-120 - 2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 & 4155652
Email: [email protected], [email protected] Website: www.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The technical data in this catalogue are therefore subject to change.
BOD INCUBATOR (RMPL-5004)
Double walled, Heavily insulated.
Temperature range 5 0C to 50 0C.
Accuracy ± 0. 5 0C.
Automatic control. Double door construction
Inner Chamber size: 455 X 610 X 410 mm
505 X 830 X 415 mm
570 X 875 X 550 mm
900 X 650 X 550 mm
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY OTHER PAPER MILL INSTRUMENT,
FEEL FREE TO CONTACT US AT:
M/S. RAJIV MACHINES(P) LTD.
Street no. 6, Main Gate, Punjab Expeller Compound, Meerut Road,
Ghaziabad-201001, U. P. (India)
Tel.: +91-120 - 2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 & 4155652
Email: [email protected], [email protected] Website: www.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The technical data in this catalogue are therefore subject to change.
LAB VALLEY BEATER (RMPL 2016)
VALLEY BEATER is intended for testing disintegration, beating or mixing of pulp under
standardized conditions.
A measured amount of pulp of specified stock concentration is beaten between the bars
of the roll and the bedplate of a valley beater. Samples of beaten pulp are taken at
certain intervals during the beating and formed test sheets from samples are applied
under standard tests.
It Conforms to international Standard TAPPI and SCAN.
Acid proof material tub with stainless steel ground and internally polished.
Hardened bedplate bars having a Brinell hardness of 325 to 357 HB.
Hardened beater roll flybars having a Brinell hardness of 350 to 400 HB.
Adjustable beating pressure by means of weighed lever arm ratio 1.94
to 1 and a dead Weight load of 5500 grams applied to longer arm generates a force of
105 N or bed plate.
Beater roll speed 8.3 r/s ± 0.2 r/s.
Beater roll beater diameter 168 mm, with 32 flybars inserted the
combined diameter is 190mm- 194mm.
Roll flybars thickness 4.7 mm and width of roll 152 mm.
7 no. bed plate bars, thickness 3.2mm, set in lead, 2.4mm apart.
Net tube volume 25 litres.
Width of plate is 159 ml.
1.5 mm. Thick flexible, rubber diaphragm between the bedplate and
bottom of beater.
Floor stand with the motor and belt drive, coated with anti corrosive
paint.
CONNECTIONS :POWER SUPPLY : 220±5% V, AC Single Phase, 50 Htz, 1 H.P.
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY OTHER PAPER MILL INSTRUMENT,
FEEL FREE TO CONTACT US AT:
M/S. RAJIV MACHINES(P) LTD.
Street no. 6, Main Gate, Punjab Expeller Compound, Meerut Road,
Ghaziabad-201001, U. P. (India)
Tel.: +91-120 - 2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 & 4155652
Email: raji[email protected], [email protected] Website: www.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The technical data in this catalogue are therefore subject to change.
PAPER ELECTRIC INCINERATOR/ ASH INCINERATOR (RMPL1010)
The unit consists of a silicate tube surrounded by the heating element
enclosed in an asbestos lined metal cylinder.
It is mounted on a stand with an adjustable holder, with flex, plug and
socket. Maximum temperature 900 0C reached in one hour.
The apparatus is lacquered and the machined parts are nickeled and
chromium plated.
Power supply: 220 V AC. Single Phase
Power consumption: 180-200 Watts.
OPTIONS
Thermostatic Temperature Control
Temperature measuring device.
Replacement of Heating Elements
Changes:
RMPL products undergo continuous development. The technical data in
this catalogue are therefore subject to change
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY OTHER PAPER MILL INSTRUMENT,
FEEL FREE TO CONTACT US AT:
M/S. RAJIV MACHINES(P) LTD.
Street no. 6, Main Gate, Punjab Expeller Compound, Meerut Road,
Ghaziabad-201001, U. P. (India)
Tel.: +91-120 - 2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 & 4155652
Email: [email protected], [email protected] Website: www.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The technical data in this catalogue are therefore subject to change.
Electronic Box Compression Tester (RMPL-3001)
This heavy duty (micro controller based) Tester is used to quantitatively
measure the strength of a corrugated cardboard box, used for movement
of goods, against the load which acts on it when it is piled underneath
when many containers are put one over the other, etc. Compression
strength is detected by means of a load cell and the test process up to
breaking of container. Having over travel protection, peak & hold facility,
automatic or normal zero setting, variable speed, printer & computer
interfacing facility.
SPECIFICATIONS: Load Range
: 2000,1000, 500, 250kgf
Sample dimension
: 120 x 120 x 150 (stroke)cm.(MAX.)
Compression Speed
: 1~100mm/min. & 13mm/min. (An exclusive
switch is equipped for 13mm/min. speed)
Electric Source
: AC 1-00V 1-P 15A 50/60Hz.
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY OTHER PAPER MILL INSTRUMENT,
FEEL FREE TO CONTACT US AT:
M/S. RAJIV MACHINES(P) LTD.
Street no. 6, Main Gate, Punjab Expeller Compound, Meerut Road,
Ghaziabad-201001, U. P. (India)
Tel.: +91-120 - 2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 & 4155652
Email: [email protected], [email protected] Website: www.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The technical data in this catalogue are therefore subject to change.
HAND SHEET FORMERS (RMPL 2005)
Sheet Size: 165 mm dia = 214 cm2 area
Trimmed Size: 200 cm2
Wire Screen (upper): 100 mesh (ASTM std.)
150 mesh (TAPPI std.)
Wire Screen (support): 20 mesh
Suction Height: 800 mm.
Stock Container and dewatering vessel Stainless Steel
Drainage Time: 3.8 ± 0.2 sec., 20 0C ± 1 0C.
Standard Accessories: Stirrer, Couch Roll, Couch Plate,
16 Nos. SS Drying Disks Mirror polished
one side,
17 Nos. Thermosetting Plastic Drying
stackable perforated rings to allow
conditioned air to flow through.
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY OTHER PAPER MILL INSTRUMENT,
FEEL FREE TO CONTACT US AT:
M/S. RAJIV MACHINES(P) LTD.
Street no. 6, Main Gate, Punjab Expeller Compound, Meerut Road,
Ghaziabad-201001, U. P. (India)
Tel.: +91-120 - 2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 & 4155652
Email: [email protected], [email protected] Website: www.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The technical data in this catalogue are therefore subject to change.
CONSISTENCY DETERMINATION APPARATUS(RMPL 2004)
CONSISTENCY DETERMINATION APPARATUS (RMPL-2004)
SPECIFICATIONS
Capacity: 1 litre
Container: Top easily removable.
Clamping: Rapid action & efficient.
Grid Plate: Fitted with a supporting lattice to facilitate removal of the pulp mat
from the wire.
OPTIONS
Vacuum Pump.
Rapid Sheet Drier for shortening the drying time
Beating & Freeness Tester
Changes:
RMPL products undergo continuous development. The technical data in this
catalogue are therefore subject to change
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY OTHER PAPER MILL INSTRUMENT,
FEEL FREE TO CONTACT US AT:
M/S. RAJIV MACHINES(P) LTD.
Street no. 6, Main Gate, Punjab Expeller Compound, Meerut Road,
Ghaziabad-201001, U. P. (India)
Tel.: +91-120 - 2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 & 4155652
Email: [email protected], [email protected] Website: www.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The technical data in this catalogue are therefore subject to change.
ELECTRONIC TENSILE TESTER (RMPL-1004)
FEATURES :
This bench mounting electronic tensile tester was ergonomically
designed to provide a compact, low –cost, functional unit which is quick
and easy to operate. It gives extremely high accuracy and yet is robust
enough for routine quality control testing. The twin –column designing
permits all –round access to the specimen and grips.
The load
measurement system utilizes a four figure peak-picking digital voltmeter
which displays maximum load until reset. The use of digital readout for
load and extension eliminates the high risk of error involved when
interpolating from graphs, kills and scales.
CROSS HEAD LIMIT TRIPS :
An adjustable upper limit setting map enables users to pre-set specimen
length and a lower fixed trip prevents any crushed over-travel.
SPECIMEN LENGTH
Electronics Tensile Tester has a total jaw separation of 400 mm. The
actual specimen length is infinitely variable from 20 to 350 mm by means
of a setting block, where on the crosshead will automatically stop at the
predetermined position. GRIP : 25 MM WIDTH.
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY OTHER PAPER MILL INSTRUMENT,
FEEL FREE TO CONTACT US AT:
M/S. RAJIV MACHINES(P) LTD.
Street no. 6, Main Gate, Punjab Expeller Compound, Meerut Road,
Ghaziabad-201001, U. P. (India)
Tel.: +91-120 - 2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 & 4155652
Email: [email protected], [email protected] Website: www.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The technical data in this catalogue are therefore subject to change.
DIGITAL BALANCE (RMPL-1002)
Digital Balance is intended for measuring the WEIGHT very rapidly and
accurately. One can weight up to 200 grams. By using this scale. Small
Test Sample of paper, board or other sheet materials is kept on the
Basket for accurate measurement of WEIGHT. Accordingly Digital
Reading in grams is seen on the screen provided for the same.
STANDARD FEATURES
Fast Weighing Response
Micro Processor Controller
v A C indication
v Check Weighting
v Re-chargeable battery back-up
Auto Power Off System
v Auto Zero Tracking
v High Brightness LED
v Stability Indication
SPECIFICATIONS :MODEL
RMPL-1002A
RMPL-1002B
RMPL-1002C
CAPACITY
200GM
300GM
600GM
READABILITY
10MG
10MG
20MG
PAN SIZE
110MM DIA
110 MM DIA
110MM DIA
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY OTHER PAPER MILL INSTRUMENT,
FEEL FREE TO CONTACT US AT:
M/S. RAJIV MACHINES(P) LTD.
Street no. 6, Main Gate, Punjab Expeller Compound, Meerut Road,
Ghaziabad-201001, U. P. (India)
Tel.: +91-120 - 2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 & 4155652
Email: [email protected], [email protected] Website: www.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The technical data in this catalogue are therefore subject to change.
ELCETRONIC TEARING RESISTANCE TESTER (RMPL 1007 A)
MICRO CONTROLLER BASED WITH STANDARD PENDULUM,
AUTOMATIC CLACULATION THROUGH MICROPROCESSOR AND
PRESENTATION OF MEASURED VALUES.
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY OTHER PAPER MILL INSTRUMENT,
FEEL FREE TO CONTACT US AT:
M/S. RAJIV MACHINES(P) LTD.
Street no. 6, Main Gate, Punjab Expeller Compound, Meerut Road,
Ghaziabad-201001, U. P. (India)
Tel.: +91-120 - 2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 & 4155652
Email: [email protected], [email protected] Website: www.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The technical data in this catalogue are therefore subject to change.
DIGITAL BURSTING STRENGTH TESTER (RMPL 1009 D)
DIGITAL BURSTING STRENGTH TESTER (RMPL 1009 D)
MICROPROSESSOR BASED
Measuring results: Individual Bursting Strength.
Compenstaing busrting strenght values for diaphgram resistance
Mean values.
Clamping: Pneumatic
Pump flow rate: 95 ± 5ml/min
Measuring range: 0-2000 kPa or 20 kg/cm2.
Accuracy ± 1% of readout values within
200 - 2000 kPa. The effect of the diaphragm must however be taken into
considerations.
Display: 4-1/2 digits
Specimen Clamp-Upper Part: 30.50 mm
Specimen Clamp-Lower Part: 33.10
APPLICABLE STANDARDS
ISO 2758, TAPPI T403, SCAN P24, APPITA/AS 1301.403, ASTM D774,
CPPA D.8, DIN 53141,
FEFCO NO. 4, NF Q 03-053, JIS 8112
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY OTHER PAPER MILL INSTRUMENT,
FEEL FREE TO CONTACT US AT:
M/S. RAJIV MACHINES(P) LTD.
Street no. 6, Main Gate, Punjab Expeller Compound, Meerut Road,
Ghaziabad-201001, U. P. (India)
Tel.: +91-120 - 2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 & 4155652
Email: [email protected], [email protected] Website: www.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The technical data in this catalogue are therefore subject to change.
PH METER ( RMPL – 5005 A )
Read Out : 3-1/2 Digits
Resolving Power : 0.01 Ph 1 MV.
Measuring Range : 0.14 Ph - 1999 ± 1999 MV.
Working Condition : 50 0C < 85% pH.
Power Source : AC 220 V 50 Hz.
Power Consumption : 50 W.
Electrodes : Glass Combined Electrodes
Over All Dimension : 100 X 330 X 180 mm.
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY OTHER PAPER MILL INSTRUMENT,
FEEL FREE TO CONTACT US AT:
M/S. RAJIV MACHINES(P) LTD.
Street no. 6, Main Gate, Punjab Expeller Compound, Meerut Road,
Ghaziabad-201001, U. P. (India)
Tel.: +91-120 - 2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 & 4155652
Email: [email protected], [email protected] Website: www.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The technical data in this catalogue are therefore subject to change.
RESEARCH DIGESTER – RMPL - 5009
The Digester is a complete pulping unit for producing pulps by
cooking wood chips in a manner similar to a commercial digester.
The unit is easy to operate and features precise control
of pulping variables to ensure good repeatability of results. A
sampling line with Cooling attachments allows liquor samples to be
withdrawn safely during The cooking process and a control valve
determines the circulation rate Of cooking chemicals.
Digester Volume: 20 Liters
Max Pressure: 20kg/cm2
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY OTHER PAPER MILL INSTRUMENT,
FEEL FREE TO CONTACT US AT:
M/S. RAJIV MACHINES(P) LTD.
Street no. 6, Main Gate, Punjab Expeller Compound, Meerut Road,
Ghaziabad-201001, U. P. (India)
Tel.: +91-120 - 2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 & 4155652
Email: [email protected], [email protected] Website: www.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The technical data in this catalogue are therefore subject to change.
A PULPING UNIT
RMPL – 5010 (A)
For Laboratory production of chemical pulp. Provided with six
autoclaves, pressure tested, each of 2.5 dm3 rotate in heated poly
glycol bath and suitable for 300/350gm bone-dry wood. Heating
elements provided with to stage heater capacity 7.5 kw each Digital
temp. Indicator-cum-controller precisely control the temperature
range 50-2500C. Drum rotation approximate 3rpm, max. working
pressure 15kg/cm2.
Option:Microprocessor based temperature indicator-cum-controller with
facility of more detailed pre-programming of boiling sequence.
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY OTHER PAPER MILL INSTRUMENT,
FEEL FREE TO CONTACT US AT:
M/S. RAJIV MACHINES(P) LTD.
Street no. 6, Main Gate, Punjab Expeller Compound, Meerut Road,
Ghaziabad-201001, U. P. (India)
Tel.: +91-120 - 2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 & 4155652
Email: [email protected], [email protected] Website: www.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The technical data in this catalogue are therefore subject to change.
PULPING UNIT
RMPL – 5010 (B)
(Autoclave Digester with hot air Heating System)
For Laboratory production of chemical pulp. Provided with six
autoclaves, pressure tested, each of 2.5 liter suitable for
300/350gm bone-dry wood rotate in forced hot air with
precise temperature control to monitor cooking behave of
different raw materials. The unit is easy to operate and boiling
parameter precisely controlled to insure good repeatability.
The autoclave bomb can be quickly cooled by using cold
water spray on it after completion of cycle. Digital temp-cumcontroller precisely control the temperature range upto2000C. The rotation with change in turning direction provide
efficient agitation to the samples.
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY OTHER PAPER MILL INSTRUMENT,
FEEL FREE TO CONTACT US AT:
M/S. RAJIV MACHINES(P) LTD.
Street no. 6, Main Gate, Punjab Expeller Compound, Meerut Road,
Ghaziabad-201001, U. P. (India)
Tel.: +91-120 - 2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 & 4155652
Email: [email protected], [email protected] Website: www.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The technical data in this catalogue are therefore subject to change.
LAB DISC REFINER
RMPL - 5011
For wet grinding and defibrating chips or experimental pulp
making . Utilized for developing pulping processes and
strength development studies on raw steamed or
chemically cooked chips, fully cooked pulp, cooked straw,
waste paper and many other materials.
With motorized screw feeding arrangements.
Disc dia 304 mm, speed 1500 – 3000 rpm.
Option
Extra Grinding Disc
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY OTHER PAPER MILL INSTRUMENT,
FEEL FREE TO CONTACT US AT:
M/S. RAJIV MACHINES(P) LTD.
Street no. 6, Main Gate, Punjab Expeller Compound, Meerut Road,
Ghaziabad-201001, U. P. (India)
Tel.: +91-120 - 2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 & 4155652
Email: [email protected], [email protected] Website: www.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The technical data in this catalogue are therefore subject to change.
FRACTIONATER – SOMERVILLE TYPE
RMPL- 5012
For determining the shieve content in
ground wood pulp. Designed in
accordance with second report of the pulp
evaluation Committee to the Technical
Section of Paper Makers Association.
Number of slots 756.width 0.15mm
Rubber diaphragm actuation by electric
motor and eccentric mechanism, driven at
690 700 rpm.
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY OTHER PAPER MILL INSTRUMENT,
FEEL FREE TO CONTACT US AT:
M/S. RAJIV MACHINES(P) LTD.
Street no. 6, Main Gate, Punjab Expeller Compound, Meerut Road,
Ghaziabad-201001, U. P. (India)
Tel.: +91-120 - 2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 & 4155652
Email: [email protected], [email protected] Website: www.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The technical data in this catalogue are therefore subject to change.
DIGITAL BRIGHTNESS AND OPACITY TESTER: ISO
(TECHNIBRITE/ELREPHO TYPE) RMPL-1016
DIGITAL BRIGHTNESS AND OPACITY TESTER
(TECHNIBRITE/ELREPHO TYPE) RMPL-1016
BRIGHTNESS and OPACITY TESTER was developed to meet the paper industry’s needs for accurate and
reliable measurement of BRIGHTNESS and OPACITY. Its design Conforms to the international standard,
ISO2469, 2470, 2471, SCAN- P3 & P8, TAPPI 525, 534, 519, BSI 4432/ pt. 1,2,3, CAPPA E.1
SPECIFICATIONS :Integrating spheres diameter – 15 cm.
Total area of aperature in sphere- less than 7.5 % of the sphere area.
Gloss Type subtends half angel of 15.5” surrounding emerging sample beam
Sample aperature – circular with 34 mm diameter.
Sample area of view – circular with 30 mm diameter.
Accepted reflected beams – perpendicular within 00 to 10 and confined to cones of
3.5” half angles.
Accuracy of ISO standards + 0.3%.
Max Photometric Linearity Error 0.1%
Power Supply 230 + 5% volts, 50VA, 50 Hz.
BRIGHTNESS: ISO Brightness is the reflectance of blue light (with an affective wave length of 457nanometers)
measured under carefully controlled geometric, photometric conditions.
OPACITY
ISO Opacity, in accordance with ISO standard 2471 measures with this meter directly.
R0 is obtained by measuring the reflectance of a single sheet backed with a black material.
R00 contained by measuring single sheet backed by multiple sheets of the same material. ISO opacity,
which is the ratio R0 /R0c is automatically read out by the instrument. Custom filter
Selection provides accurate agreement with the ISO 2471 spectral response function at effective
wavelength 557 nanometer.
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY OTHER PAPER MILL INSTRUMENT,
FEEL FREE TO CONTACT US AT:
M/S. RAJIV MACHINES(P) LTD.
Street no. 6, Main Gate, Punjab Expeller Compound, Meerut Road,
Ghaziabad-201001, U. P. (India)
Tel.: +91-120 - 2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 & 4155652
Email: [email protected], [email protected] Website: www.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The technical data in this catalogue are therefore subject to change.
MUFFLE FURNACE
(RMPL-5002)
•
MUFFLE FURNACE IS HAVING MULTIPURPOSE APPLICATION INCLUDING ASH
TESTING. IT IS WIDELY
ACCEPTED/APPROVED INSTRUMENT FOR
PAPER INDUSTRIES FOR TAKING VARIOUS
TESTING. THE LIFE / DURABILITY OF
MUFFLE FURNACE IS 3 TIMES LONGER THAN
ASH TESTER.
•
•
•
TECHNICAL SPECIFICATIONS: Temp Range: 0 –9000 C
Size: 5” x 5” x 9”
TECHNICAL SPECIFICATIONS: Temp Range: 0 –9000 C
Size: 5” x 5” x 9”
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY OTHER PAPER MILL INSTRUMENT,
FEEL FREE TO CONTACT US AT:
M/S. RAJIV MACHINES(P) LTD.
Street no. 6, Main Gate, Punjab Expeller Compound, Meerut Road,
Ghaziabad-201001, U. P. (India)
Tel.: +91-120 - 2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 & 4155652
Email: [email protected], [email protected] Website: www.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The technical data in this catalogue are therefore subject to change.
PAPER STRIP TRIMMER
(RMPL-1008-B)
PAPER STRIP TRIMMER is intended for accurate cutting
of sample strips.
SPECIFICATIONS:Fitted with finger guard.
Outer strip bar with spaces rings adjustable
of 10, 12.7 or 15 mm strip width.
Replaceable knife.
Cutting length 360 mm
Dimension : 60 x 30 x 20 cm.
OPTIONS:Other strip width and length 100 mm, 150 mm, 250 mm
and 300 mm.
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY OTHER PAPER MILL INSTRUMENT,
FEEL FREE TO CONTACT US AT:
M/S. RAJIV MACHINES(P) LTD.
Street no. 6, Main Gate, Punjab Expeller Compound, Meerut Road,
Ghaziabad-201001, U. P. (India)
Tel.: +91-120 - 2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 & 4155652
Email: [email protected], [email protected] Website: www.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The technical data in this catalogue are therefore subject to change.
PAPER STRIP TRIMMER
(RMPL-1005)
PAPER STRIP TRIMMER is intended for accurate cutting of sample strips.
SPECIFICATIONS:Fitted with finger guard.
Outer strip bar with spaces rings adjustable
of 10, 12.7 or 15 mm strip width.
Replaceable knife.
Cutting length 360 mm
Dimension : 60 x 30 x 20 cm.
OPTIONS:Other strip width and length 100 mm, 150 mm,
250 mm and 300 mm.
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY OTHER PAPER MILL INSTRUMENT,
FEEL FREE TO CONTACT US AT:
M/S. RAJIV MACHINES(P) LTD.
Street no. 6, Main Gate, Punjab Expeller Compound, Meerut Road,
Ghaziabad-201001, U. P. (India)
Tel.: +91-120 - 2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 & 4155652
Email: [email protected], [email protected] Website: www.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The technical data in this catalogue are therefore subject to change.
DIGITAL RING CRUSH TESTER (RMPL –
5014)
The Ring Crush Test correlates with edgewise compression strength of paper board.
The compressive force is extended on a specimen held in ring form in a special jig and placed
between two platens of a compression machine by causing the upper platen approach the
lower platen at a uniform speed until the specimen collapses
Features:vMeasure & retain Peak Load
vTest result & statistics are displayed on display window.
vAutomatic zero setting.
vForce measurement by Load cell.
vMeasuring Results Breaking Force in kfg & RCT in N/m.
Technical Specification
Deformation
Calibrated 12.0mm/min Speed.
Measuring Range
0 – 5000N
Accuracy
1% of measured value
Rupture Sensitivity
2 – 10% of the relevant maximum load
Specimen Holder Groove Depth 6.35mm.
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY OTHER PAPER MILL INSTRUMENT,
FEEL FREE TO CONTACT US AT:
M/S. RAJIV MACHINES(P) LTD.
Street no. 6, Main Gate, Punjab Expeller Compound, Meerut Road,
Ghaziabad-201001, U. P. (India)
Tel.: +91-120 - 2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 & 4155652
Email: [email protected], [email protected] Website: www.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The technical data in this catalogue are therefore subject to change.
DIGITAL PH ONDUCTIVITY & TEPM. METER(RMPL –
5015)
The instruments is extremely useful for chemical laboratories, pollution & environment testing,
public health engg., sugar, cement, paper industry, pharmaceuticals & boiler water analysis,
agriculture & soil labs, brewery & transport under taking, fertilizer plants & petroleum refineries
etc.
Features:vHighly Stable & Accurate
vCell Constant Adjustment Facility
v3 ½ Digit Red LED Display
vRugged & Reliable Design
Technical Specification
Digital Display : 3 ½ Digit LED
Power: : 220VAC ± 10% 50Hz
Dimensions : 75 x 175 x 275mm.
Weight : 2.5Kh. (aprx.)
Conductivity
Range : 0 to 20 mS/cm in 02 ranges
Accuracy : ± 0.5% ± 1 digit
Resolution : 1 µs/cm.
Oscillator : 1 KHz in built
Cell : 0.2 to 1.8 adjustable directly on digital display
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY OTHER PAPER MILL INSTRUMENT,
FEEL FREE TO CONTACT US AT:
M/S. RAJIV MACHINES(P) LTD.
Street no. 6, Main Gate, Punjab Expeller Compound, Meerut Road,
Ghaziabad-201001, U. P. (India)
Tel.: +91-120 - 2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 & 4155652
Email: [email protected], [email protected] Website: www.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The technical data in this catalogue are therefore subject to change.
Electrical box compression tester (RMPL –
3001)
This heavy duty (Micro controller based) tester is used to measure the strength of a corrugated
cardboard box used for movement of goods against the load which acts on it is piled
underneath when many containers are put on over the other.
Compression Strength is detected by means of a load cell.
Technical Specification
Load Range
2000, 1000, 500, 250kgf.
Sample Dimensions
120 x 120 x 150 (stroke)
Compression Speed
1 – 100mm/min. & 13mm per min.
an exclusive switch is equipped for
13mm. / min. speed)
Electric source
AC 1 – 00V 1-P 15 A 50 / 6 Hz
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY OTHER PAPER MILL INSTRUMENT,
FEEL FREE TO CONTACT US AT:
M/S. RAJIV MACHINES(P) LTD.
Street no. 6, Main Gate, Punjab Expeller Compound, Meerut Road,
Ghaziabad-201001, U. P. (India)
Tel.: +91-120 - 2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 & 4155652
Email: [email protected], [email protected] Website: www.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The technical data in this catalogue are therefore subject to change.
Bomb Calorimeter (RMPL – 5016)
-Used for determination of combution of heat of calorific value of the fuel & other organic material.
- Designed as per specification of Institute of Petrolium BS 1016 standard IS No. 1350/1966
-Supplied complete with water jacket made of Brass/S. Steel Sheet duly nickled Chrimium plated with
Bakelite Lid.
-S. Steel Bomb, Bomb Jacket, Water Calorimeter Circulation
-Briquit, Pellet Press heavy duty.
-Spanners magnified glass with nickled nichrome wire & cotton reel
-Gas Releasing Valve, S. Steel crucible
-Benzoic acid with known calorific value
-Full featured Digital Controller & Safety device & Temp. Sensor
Applications:- Petroleum Industries / Coal Industries / Educational Institute & Research lab.
Technical Parameters:-Power Consumption: 220/230V AC Supply Phase ±10% 50Hz
-Duty Cycle: continiuos
-Optional: Oxygen Cylinder, Remote Control for firing, Calibration of Bomb from Govt. Approval Lab.
With certification
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY OTHER PAPER MILL INSTRUMENT,
FEEL FREE TO CONTACT US AT:
M/S. RAJIV MACHINES(P) LTD.
Street no. 6, Main Gate, Punjab Expeller Compound, Meerut Road,
Ghaziabad-201001, U. P. (India)
Tel.: +91-120 - 2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 & 4155652
Email: [email protected], [email protected] Website: www.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The technical data in this catalogue are therefore subject to change.
Download
Related flashcards

Statistical theory

24 cards

Colossal statues

38 cards

Statistical software

79 cards

Plotting software

51 cards

Create Flashcards